X-600m2 Series – Industrial m.2 SATA Solid State Drive
Product Summary
•
•
•
•
•
Capacities: 8 GBytes, 16 GBytes, 32 GBytes, 64 GBytes
Form Factor: PCI Express
TM
M.2 (2242) (42 mm x 22 mm x 3.3 mm)
Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible)
Command Sets: Supports ATA/ATAPI-8 and ACS-2
Performance:
o
Read Performance: Sequential Read up to 520 MBytes/s, Random Read IOPs up to 76,000
o
Write Performance: Sequential Write up to 245 MBytes/s, Random Write IOPs up to 54,000
Operating Temperature Range
*
:
o
Commercial: 0 °C to 70 °C
o
Industrial: -40 °C to 85 °C
Storage Temperature Range: -40 °C to 85 °C
Operating Voltage: 3.3 V ± 5%
Power (Max Capacity): Read (Active): 1.5 W; Write (Active): 1.7 W; Idle: 346 mW; Slumber: 115 mW
Data Retention: 10 Years @ Life Begin; 1 Year @ Life End
Endurance in TeraBytes Written (TBW) Max Capacity
†
: Client > 3,855; Embedded > 960; Enterprise > 550
Shock/Vibration: 1,500
g
/50
g
(IEC 60068-2-27 and JESD22-B110/MIL-STD-883)
Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page
Mean Time Between Failure: > 2,000,000 hours
Data Reliability: < 1 non-recoverable error per 10
16
bits read
•
•
•
•
•
•
•
•
•
•
Product Features
•
•
Dynamic and Static Wear Leveling
Data Care Management
o
Active: Adaptive Read Refresh
o
Passive: Background Media Scan
Lifetime Enhancements
o
Dynamic Bad Block Remapping
o
Write Amplification Reduction
On-Board Power Fail Protection
AHCI, TRIM, and NCQ Support
ATA Security Feature Set Support
DEVSLP Compatible
In-Field Firmware Update
Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
30 μinch Gold-Plated Connector (IPC-6012B Class 2 Compliant)
AES256 Encryption (on request)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)
•
•
•
•
•
•
•
•
•
•
Why Swissbit?
Swissbit is focused on the design, development, manufacture, and support of leading edge memory and
storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and
addressees the higher level of application requirements of today’s industrial, Netcom, and automotive
customers by providing best-in-class products and services, with uncompromised attention to driving
overall value and quality.
*
Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified
maximum operating temperature.
†
According to JEDEC (JESD47I), the time to write the full TBW is 18 months. Higher average daily data volume reduces the specified TBW.
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
Revision: 1.08
www.swissbit.com
industrial@swissbit.com
X-600m2_2242_fact_sheet_Rev108.doc
Page 2 of 2
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
