Murata Power Solutions’ fully isolated HPH series of DC/DC converters affords users a practical solu-
tion for their low-voltage/high-current applications. With an input voltage range of 36 to 75 Volts, the HPH
Series delivers up to 70 Amps of output current from a fully regulated 3.3V output.
OBSOLETE PRODUCT
FEATURES
Typical unit
Last time buy: August
PRODUCT OVERVIEW
31, 2014.
Click Here For Obsolescence Notice
Using both surface-mount technology and pla-
of February 2014.
nar magnetics, these converters are manufactured
on a 2.3" x 2.4", lead-free, open-frame package
with an industry-standard pinout.
HPH converters utilize a full-bridge, fixed-
frequency topology along with synchronous output
rectification to achieve a high efficiency. This
efficiency, coupled with the open-frame package
that allows unrestricted air flow, reduces internal
component temperatures thereby allowing operation
Compliant
RoHS
to 12V outputs @ up to 70 Amps
3.3V
range: 36V-75V
Input
Frame: 2.3" x 2.4" x 0.40"
Open
Industry-standard package/pinout
Remote sense, Trim, On/Off control
efficiency: up to 91%
High
isolated, 2250Vdc (BASIC)
Fully
undervoltage shutdown
Input
Output overvoltage protection
circuit protection, thermal shutdown
Short
ed to UL/EN/IEC 60950-1, 2nd Edition,
Certifi
CAN/CSA-C22.2 No. 60950-1 safety approvals
mark
CE
Optional baseplate offers increased thermal
performance
+Vin
(4)
at elevated ambient temperatures.
These DC/DC’s provide output trim, sense pins
and primary side on/off control (available with posi-
tive or negative logic). Standard features also include
input undervoltage shutdown circuitry, output
overvoltage protection, output short-circuit and
current limiting protection and thermal shutdown.
All devices are certified to IEC/UL/EN60950-1, 2nd
Edition safety standards and carry the CE mark
(meet LVD requirements).
+SENSE
(6)
+Vout
(5)
SWITCH
CONTROL
–Vout
(9)
–Vin
(1)
PULSE
TRANSFORMER
Input undervoltage, input
overvoltage, and output
overvoltage comparators
–SENSE
(8)
PWM
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR AMP
Vout
TRIM
(7)
REMOTE
ON /OFF
CONTROL*
(3)
Figure 1. Simplified Schematic
Typical topology is shown. Some models may vary slightly.
* Can be ordered with positive (standard) or negative (optional) polarity.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_HPH_B01
Page 1 of 13
HPH Series
Isolated, Low V
OUT
to 70A, Half-Brick DC/DC Converters
PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE
Output
V
OUT
(Volts)
I
OUT
(Amps,
Max.)
Power
(Watts)
R/N (mV pk-pk)
Typ.
Max.
Regulation (Max.)
Line
Load
V
IN
Nom.
(Volts)
Input
Efficiency
Root Model
Range
(Volts)
I
IN
, no
load
(mA)
I
IN
, full
load
(Amps)
Min.
Typ.
Package
(Case/
Pinout)
HPH-3.3/70-D48N-C
HPH-5/40-D48N-C
HPH-12/30-D48N-C
3.3
5
12
70
40
30
231
200
360
100
100
125
125
±0.25%
±0.25%
±0.25%
±0.25%
48
48
36-75
36-75
70
70
5.35
4.58
88%
90%
90%
91%
C61
C61
P17
P17
Please refer to the separate HPH-12/30-D48 data sheet.
Please refer to the full model number structure for additional ordering part numbers and options.
All specifications are at nominal line voltage and full load, +25ºC. unless otherwise noted. See detailed specifications.
Full power continuous output requires baseplate installation. Please refer to the derating curves.
PART NUMBER STRUCTURE
HPH
-
3.3
/
70
-
D48 N B
Unipolar
High-Power Series
Nominal Output Voltage
Maximum Output Current
in Amps
H Lx
-
C
RoHS Hazardous Materials compliance
C
= RoHS-6 (no lead), standard, does not claim EU exemption 7b – lead in solder
Y
= RoHS-5 (with lead), optional, special quantity order
Pin length option
Blank
= standard pin length 0.180 in. (4.6 mm)
L1
= 0.110 in. (2.79 mm)*
L2
= 0.145 in. (3.68 mm)*
Conformal coating (optional)
Blank
= no coating, standard
H
= Coating added, optional, special quantity order
Baseplate (optional)
Blank
= No baseplate, standard
B
= Baseplate installed, optional quantity order
*Special quantity order is required;
no sample quantities available.
Note:
Some model number combinations
may not be available. Please contact
Murata Power Solutions.
Input Voltage Range:
D48 = 36-75 Volts (48V nominal)
On/Off Control Polarity
N
= Negative polarity, standard
P
= Positive polarity, optional
Note: Because of the high currents, wire the appropriate input, output and common pins in parallel. Be sure to use adequate PC board etch. If not sufficient, install additional discrete wiring.
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
