Page 2 of 2
This is just about the cutest, tiniest little micro servo we could find, even smaller
than the 9 gram micro servos we love so much.
It
can rotate approximately 180
degrees (90 in each direction) and works just like the standard kind you're used to
but
much smaller
.
You can use any servo code, hardware or library to control these servos.
Good for beginners who want to make stuff move without building a motor controller with feedback
& gear box, especially since it will fit in small places. Of course, its not nearly as strong as a
standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo
library. Comes with a few horns and hardware.
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using
the Servo library (http://www.arduino.cc/en/Reference/Servo) included with the Arduino IDE (see
here for an example sketch (http://arduino.cc/en/Tutorial/Sweep)). Position "0" (1.5ms pulse) is
middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.
http://www.adafruit.com/products/2201
2/23/2015