Da t a S h ee t , V e rs i on 1. 2 , D ec e m be r 2 00 3
P re s c a l e r C i rc u i t 2 . 1 G H z
P M B 2 31 4 T
V e r s i o n 1. 5
W i re l e s s In f r a s tr u c t ur e
N e v e r
s t o p
t h i n k i n g .
Edition 2003-12-04
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
©
Infineon Technologies AG 2003.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Prescaler Circuit 2.1 GHz
Revision History:
Previous Version:
Page
All
2003-12-04
none
Version 1.2
Subjects (major changes since last revision)
Updated Format
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
mcdocu.comments@infineon.com
PMB 2314T
Version 1.5
Table of Contents
1
2
3
4
5
6
7
8
9
Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pin Assignment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Block Diagram
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Absolute Maximum Ratings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Range
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AC/DC Characteristics
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Test Circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Application Circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Diagrams
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
- Definition of Modulus Set-Up Time
- Input Dynamic Range
Package Outlines
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10
Data Sheet
<Doc_Subtype>
4
Version 1.2, 2003-12-04
PMB 2314T
Version 1.5
Overview
1
1.1
Overview – Prescalar Circuit 2.1 GHz
Functional Description/ Application
The IC is designed for use in mobile radio communication devices up to 2100 MHz and upconversion systems up
2500 MHz.
Due to low power consumption and low phase noise generation, the PMB2314T is suitable for use in battery
powered handheld systems, e.g. GSM, cordless telephones and cordless consumer products, as well as in
basestations.
Low supply voltage down to 2.7V. It can be switched to a low-power standby mode.
Internal current source at the emitter follower output. No external resistor needed in typical applications.
The divide ratio is 1:64/65 or 1:128/129 depending on the external circuit configuration.
1.2
Circuit Description
The differential inputs of the IC may be connected either balanced or single ended. In the latter case the unused
input must be RF-grounded with a capacitor (about 10 pF) with a low serial inductance.
Depending on the logic level at SW input the basic divide ratio of the ECL-stages is fixed to 1:64/65 or 1:128/129.
The MOD input determines whether modulus 1:n or 1:n+1 (n=64 or 128 according to SW-level) is active.
The IC can be switched to a low-power standby mode (input STB).
The MOD input is TTL/CMOS compatible.
The emitter follower output is CMOS compatible according to the application circuit on page 12. The minimum logic
swing is 0.8 V
pp
.
Table 1
Function Table
Input pin
SW
MOD
STB
Logic level
HIGH = U
S
-0.1 V to U
S
LOW = GND to 0.8 V or open
HIGH = 2.0 V to U
S
or open
LOW = GND to 0.8 V
HIGH = U
S
-0.1 V to U
S
LOW = GND to 0.8 V
Prescaler function
1:64/65
1:128/129
1:64/1:128
1:65/1:129
Divider
Q=HIGH, STANDBY-mode
Data Sheet
5
Version 1.2, 2003-12-04
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
