UHF RFID Inlays
AD-321r6-P
Dimensions
Operating Frequency
RF Protocol
Chip
EPC Memory
USER Memory
TID Memory
41.1 x 16 mm
Global (860 – 960 MHz)
ISO-18000-6C, EPC Class 1, Gen 2
Impinj Monza R6-P
128/96 bits
32/64 bits
48-bit unique serialized TID Number
Common Applications
Supply Chain, Inventory & Logistics
Apparel
Pharmaceutical and Healthcare
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
PART NUMBER
Format
Antenna dimensions
(CDxMD)
Die-cut dimensions
Inlay substrate material
Inlay-to-liner adhesive
Liner material
Face Sheet
Standard pitch
Standard web width
Total thickness over chip
Operating temperature
RoHS
Quality assurance
RF600789
Dry Inlay
1.63 x 0.63 in
(41.4 x 16 mm)
N/A
White PET
N/A
N/A
N/A
1.0 in (25.4 mm)
2.0 in (50.8 mm)
9 -11 mils (229-279
microns)
-40 to 185F (-40 to 85C)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
Inlay-side Out
3 in (76.2 mm)
17 in (431.8 mm)
40,000 good +/- 10%
01
RF600788
Wet Inlay
1.63 x 0.63 in
(41.4 x 16 mm)
1.755 x 0.755 in
(44.6 x 19.17 mm)
White PET
S-490 (FASSON)
1.5M Clear PET
N/A
1.0 in (25.4 mm)
2.0 in (50.8 mm)
11-13 mils (279-330
microns)
-40 to 185F (-40 to 85C)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
PS Inlay-side Out
3 in (76.2mm)
13 in (330.2mm)
20,000 good +/- 10%
01
RF100377
Paper Label
Un-wind direction
Core size with adaptor insert
Maximum roll outer diameter
(not to exceed)
Average # of units per roll
Rev
1.63 x 0.63 in
(41.4 x 16 mm)
1.75 x 0.75 in
(44.5 x 19.0 mm)
N/A
S-490 (FASSON)
40# SCK (FASSON)
55# 2C (FASSON)
Bright White
1.5 in (38.1 mm)
2.0 in (50.8 mm)
12 -14 mils (305-356
microns)
-40 to 185F (-40 to
85C)
EU Directive
2011/65/EU Compliant
100% read tested with-
of-tolerance inlay
marked
Label-side Out
3 in (76.2 mm)
(no foam)
8 in (203.2 mm)
8,000 good +/- 10%
01
Care and handling:
RFID inlays are sensitive to ESD. Observe standard industry practices relating to
electronics/RFID to keep environmental impact and static charge to a minimum.
Applications:
This product should be tested by the customer/ user thoroughly under end use conditions to ensure
the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any
particular purpose or use.
Warranty:
Please refer to Avery Dennison RFID standard terms and conditions.
Product Information:
Avery Dennison reserves the right to modify, change, supplement or discontinue product
offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison
makes no representation concerning the accuracy or correctness of the data.
Trademark statement:
Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation.
US
D775,109 and other
patents
pending.
For the most recent information on Avery Dennison products, visit
www.rfid.averydennison.com.
© 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
测试/测量
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
