Accutrim™ 1260 (RJ24 Style)
Vishay Foil Resistors
Bulk Metal
®
Foil Ultra High Technology Precision Trimming Potentiometers,
3
/ " Square, RJ24 Style, Designed to Meet or Exceed the Requirements of
8
MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Temperature coefficient of resistance (TCR):
± 10 ppm/°C (- 55 °C to + 150 °C ref. at + 25 °C);
through the wiper
(2)
; ± 25 ppm/°C (see table 2 for
low values)
A smooth and unidirectional resistance with
leadscrew adjustment
Load life stability: 0.1 % typical
R,
1.0 % maximum
R
under full rated power at + 85 °C for 10 000 h
Settability: 0.05 % typical; 0.1 % maximum
Setting stability: 0.1 % typical; 0.5 % maximum
Power rating: 0.25 W at + 85 °C
Resistance range: 5
to 10 k
Resistance tolerance: ± 5 %, ± 10 %
“O”-ring prevents ingress of fluids during any board
cleaning operation
Electrostatic discharge (ESD) up to 25 000 V
Terminal finish: tin/lead or lead free
FEATURES
INTRODUCTION
Vishay Foil Resistors (VFR) precision trimmers have the
Bulk Metal
®
Foil resistive element which possesses a unique
inherent temperature and load life stability. Plus, their
advanced virtually back lash-free adjustment mechanism
makes them easy to set quickly and accurately and keeps
the setting exactly on target.
Resistance
Resistance
BULK METAL
FOIL
WIREWOUND
Resistance
CERMET
Wiper Travel
Wiper Travel
Wiper Travel
TABLE 1 - MODEL SELECTION
MODEL
1260
Note
• See figure 1
TERMINATION STYLE
W-edge mount, top adjust
X-edge mount, side adjust
AVERAGE WEIGHT (g)
0.4
POWER RATING at + 85 °C AMBIENT
0.25 W
NO. OF TURNS
21 ± 2
TABLE 2 - 1260 (RJ24 STYLE) SERIES
ELECTRICAL SPECIFICATIONS
Temperature Coefficient of
Resistance (TCR) 50
to 10 k
End-to-end
(1)
± 10 ppm/°C maximum
(- 55 °C to + 150 °C,
+ 25 °C ref.)
TABLE 3 - VALUES VS. TOLERANCES
STANDARD RESISTANCE VALUES
(in
)
5, 10
20, 50, 100, 200, 500, 1K, 2K, 5K, 10K
STANDARD
TOLERANCE
± 10 %
±5%
Temperature Coefficient of
Resistance (TCR) 5
,
10
and
20
± 20 ppm/°C
Through the wiper
(2)
± 25 ppm/°C
Stability
Load life at 10 000 h
Power Rating
Settability
Setting Stability
Contact Resistance
Variation - CRV (noise)
Hop-off
High-Frequency Operation
Rise/decay time
Inductance
Capacitance
Operating Temperature Range
Document Number: 63054
Revision: 8-Nov-12
(3)
0.1 % typical
R
1.0 % maximum
R
(under full rated power
of 0.25 W at + 85 °C)
0.25 W at + 85 °C
0.05 % typical;
0.1 % maximum
0.1 % typical;
0.5 % maximum
3
typical;
10
maximum
0.25 % typical;
1.0 % maximum
1 ns without ringing
0.08 µH typical
0.5 pF typical
- 55 °C to + 150 °C
TABLE 4 - MECHANICAL SPECIFICATIONS
Adjustment Turns
Mechanical Stops
Internal Terminations
Case Material
Shaft Torque
Backlash
21 ± 2
Wiper idles - no discontinuity
All welded - no flux
Diallyl-phthalate: black (DAP)
3 oz. in. maximum
0.005 % typical
www.vishayfoilresistors.com
1
For any questions, contact:
foil@vishaypg.com
Accutrim™ 1260 (RJ24 Style)
Vishay Foil Resistors
FIGURE 1 - SCHEMATIC AND DIMENSIONS
in Inches (Millimeters)
1260W
0.081 ± 0.010" (2.06 ± 0.25 mm)
0.080" (2.03 mm) maximum
VFR
0.420" (10.67 mm) maximum
0.015" (0.38 mm)
minimum
0.300" (7.62 mm) minimum
3 pins
0.024 ± 0.006" (0.61 ± 0.15 mm) diameter
3
CW
1
2
STANDARD MARKING:
0.090 ± 0.005"
(2.29 ± 0.13 mm) diameter
± 0.010" (± 0.25 mm)
C
Model No.
Date Code
Resistance Value
Tolerance
Termination Finish - in case of
Lead Free (L.F)
NOTES:
Adjustment screw 0.090" (2.29 mm)
diameter with 0.020" (0.51 mm) x
0.031" (0.79 mm) slot. Model 1260
has solder plated copper terminal
pins. 0.024" (0.61 mm) diameter,
0.300" (7.62 mm) length minimum.
0.170 ± 0.025"
(4.32 ± 0.64 mm)
0.075 ± 0.010"
(1.91 ± 0.25 mm)
0.375 ± 0.015"
(9.53 ± 0.38 mm)
0.100 ± 0.005"
(2.54 ± 0.13 mm)
0.187 ± 0.020"
(4.75 ± 0.51 mm)
1260X
0.080" (2.03 mm) maximum
0.081 ± 0.010"
(2.06 ± 0.25 mm)
0.420" (10.67 mm)
maximum
VFR
2
CW
0.015" (0.38 mm)
minimum
0.300" (7.62 mm) minimum
1
3
3 PINS
0.024 ± 0.006" (0.61 ± 0.15 mm) diameter
± 0.010" (± 0.25 mm)
C
0.100 ± 0.005"
(2.54 ± 0.13 mm)
0.187 ± 0.020"
(4.75 ± 0.51 mm)
0.170 ± 0.025"
(4.32 ± 0.64 mm)
0.075 ± 0.010"
(1.91 ± 0.25 mm)
0.090 ± 0.005"
(2.29 ± 0.13 mm) DIA
0.375 ± 0.015"
(9.53 ± 0.38 mm)
FIGURE 2 - POWER DERATING CURVE
Percent of Rated Power
+ 100
+ 75
+ 50
+ 25
0
- 75
+ 85 °C
- 50
- 25
0
+ 25
+ 50
+ 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
www.vishayfoilresistors.com
2
For any questions, contact:
foil@vishaypg.com
Document Number: 63054
Revision: 8-Nov-12
Accutrim™ 1260 (RJ24 Style)
Vishay Foil Resistors
TABLE 5 - COMPARISON
MIL-PRF-39035/2 CHARACTERISTIC H
(4)
TEST GROUP I
Conditioning
Contact resistance variation - CRV (noise)
Immersion
TEST GROUP Ia
Visual and mechanical
Actual effective electrical travel
End resistance
Dielectric withstanding voltage - DWV
Per MIL-STD-202, methods 301 and 105
Atmospheric pressure
Barometric pressure
Insulation resistance
Shaft torque
Thermal shock
Setting stability
TEST GROUP II
Solderability
TEST GROUP III
Resistance temperature characteristic - TCR
Moisture resistance
Contact resistance variation - CRV (noise)
TEST GROUP IV
Settability
Shock
Setting stability
Vibration
Setting stability
Contact resistance variation - CRV (noise)
Salt spray
TEST GROUP V
Solder heat
Low-temperature operation
Setting stability
Low-temperature storage
High-temperature exposure
Setting stability
Contact resistance variation - CRV (noise)
Integrity of shaft
TEST GROUP VI
Rotational life (200 cycles)
Contact resistance variation - CRV (noise)
Terminal strength
TEST GROUP VII
Life (2000 h) at + 85 °C
Life (10 000 h) at + 85 °C
TEST GROUP VIII
Solvent resistance
Notes
(1)
Maximum TCR applies to the 3
(sigma) limit or 99.73 % of a
production lot. (Measured end-to-end with wiper off the element.)
(2)
Measurements of TCR through the wiper are influenced more by
setting stability and the percentage of the total resistance in use
(at the wiper) than by fundamental resistance change due to
temperature alone. The parameter shown in table 2 is a 2 s
distribution typifying the behavior of the device when used with
40 % or more of the total resistance in use.
(3)
Derated linearly for full power at + 85 °C to zero power at
+ 150 °C. See figure 2.
(4)
All
R’s
are measured to the tolerance specified + 0.01
.
(5)
Whichever is greater.
Special available options:
Special marking
Power conditioning and screening operations.
Document Number: 63054
Revision: 8-Nov-12
± 1.0 %
± 3.0 % or 3
(5)
No continuous stream of bubbles
No failures
10 to 25 turns
2 % or 2
(5)
1260 MAXIMUM
± 0.5 %
3
typical,
10
maximum
No continuous stream of bubbles
No failures
21 ± 2 turns
2
for
values
1 k;
5
for
values
2 k;
600 V
AC
, 1 min
250 V
AC
, 1 min
> 1000 M
3 oz. in. maximum
± 0.5 %
± 0.5 %
Per MIL-STD-202, method 208
± 0.001 %/°C (± 10 ppm/°C)
± 0.5 %
3
typical,
10
maximum
± 0.1 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
3
typical,
10
maximum
No corrosion
± 0.1 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
3
typical,
10
maximum
No loosening or breakage
± 2.0 %
3
typical,
10
maximum
2 lbs.
± 0.1 % typical, ± 1.0 % maximum
± 0.1 % typical, ± 1.0 % maximum
No failures
600 V
AC
, 1 min
250 V
AC
, 1 min
1000 M
3 oz. in. maximum
± 1.0 %
± 1.0 %
Per MIL-STD-202, method 208
± 0.005 %/°C (± 50 ppm/°C)
± 1.0 %
3.0 % or 3
(5)
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
3.0 % or 3
(5)
No corrosion
± 1.0 %
± 1.0 %
± 2.0 %
± 1.0 %
± 3.0 %
± 2.0 %
3.0 % or 3
(5)
No loosening or breakage
± 2.0 %
3.0 % or 3
(5)
2 lbs.
± 3.0 %
± 5.0 %
No failures
VFR TRIMMERS ARE INSPECTED
100 % for:
• Immersion
• Resistance tolerance check
• End resistance
• Visual-mechanical
• Dynamic tests for continuity, CRV
By sample for:
• TCR
• DWV
For any questions, contact:
foil@vishaypg.com
www.vishayfoilresistors.com
3
Accutrim™ 1260 (RJ24 Style)
Vishay Foil Resistors
TABLE 6 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y0069500R000J0L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
K
= k
CHARACTERISTICS
(1)
9
= lead (Pb) - free
0
= tin/lead termination
1 to 999
= custom
Y
0
0
6
9
5
0
0
TOLERANCE
J
= ± 5 %
K
= ± 10 %
M
= ± 20 %
R
0
0
0
J
0
L
PRODUCT CODE
0069
= 1260W
4069
= 1260X
PACKAGING
L
= foam/box pack
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0069 500R000 J 0 L:
TYPE: 1260W
VALUE: 500.0
ABSOLUTE TOLERANCE: ± 5.0 %
TERMINATION: tin/lead
PACKAGING: foam/box pack
HISTORICAL PART NUMBER: 1260W 500R00 J B B (will continue to be used)
1260W
MODEL
1260W
1260X
Note
(1)
500R00
RESISTANCE VALUE
500R00
= 500.00
J
TOLERANCE
J
= ± 5 %
K
= ± 10 %
M
= ± 20 %
B
TERMINATION
S
= lead (Pb)-free
B
= tin/lead
B
PACKAGING
B
= foam/box pack
For non-standard requests, please contact application engineering.
www.vishayfoilresistors.com
4
For any questions, contact:
foil@vishaypg.com
Document Number: 63054
Revision: 8-Nov-12
Legal Disclaimer Notice
Vishay Precision Group, Inc.
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.
The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.
VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.
Product names and markings noted herein may be trademarks of their respective owners.
Copyright Vishay Precision Group, Inc., 2014. All rights reserved.
Document No.: 63999
Revision: 15-Jul-2014
www.vpgsensors.com
1
/y4069200r000j0l_pdf/pg_0001.png)
消费电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界/y4069200r000j0l_pdf/1.png)
/y4069200r000j0l_pdf/2.png)
/y4069200r000j0l_pdf/3.png)
/y4069200r000j0l_pdf/4.png)
/y4069200r000j0l_pdf/5.png)
/y4069200r000j0l_pdf/pg_0002.png)
/y4069200r000j0l_pdf/pg_0003.png)
/y4069200r000j0l_pdf/pg_0004.png)
/y4069200r000j0l_pdf/pg_0005.png)
