To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN5069 PWM and LDO Controller Combo
September 2006
FAN5069
PWM and LDO Controller Combo
Features
■
■
■
Description
The FAN5069 combines a high-efficiency Pulse-Width-
Modulated (PWM) controller and an LDO (Low DropOut)
linear regulator controller. Synchronous rectification pro-
vides high efficiency over a wide range of load currents.
Efficiency is further enhanced by using the low-side
MOSFET’s R
DS(ON)
to sense current.
Both the linear and PWM regulator soft-start are con-
trolled by a single external capacitor, to limit in-rush cur-
rent from the supply when the regulators are first
enabled. Current limit for PWM is also programmable.
The PWM regulator employs a summing-current-mode
control with external compensation to achieve fast load
transient response and provide design optimization.
FAN5069 is offered in both industrial temperature grade
(-40°C to +85°C) as well as commercial temperature
grade (-10°C to +85°C).
■
■
■
■
■
■
■
■
■
General Purpose PWM Regulator and LDO Controller
Input Voltage Range: 3V to 24V
Output Voltage Range: 0.8V to 15V
– V
CC
– 5V
Shunt Regulator for 12V Operation
Support for Ceramic Cap on PWM Output
Programmable Current Limit for PWM Output
Programmable Switching Frequency (200KHz to
600KHz)
R
DS(ON)
Current Sensing
Internal Synchronous Boot Diode
Soft-Start for both PWM and LDO
Multi-Fault Protection with Optional Auto-restart
16-pin TSSOP Package
Applications
■
■
■
■
PC/Server Motherboard Peripherals
– V
CC_MCH
(1.5V), V
DDQ
(1.5V) and
V
TT_GTL
(1.25V)
Power Supply for
– FPGA, DSP, Embedded Controllers, Graphic Card
Processor, and Communication Processors
Industrial Power Supplies
High-Power DC-to-DC Converters
Ordering Information
Part Number
FAN5069MTCX
FAN5069EMTCX
Operating Temp. Range Pb-Free
-10°C to +85°C
-40°C to +85°C
Yes
Yes
Package
16-Lead TSSOP
16-Lead TSSOP
Packing Method
Tape and Reel
Tape and Reel
Qty./Reel
2500
2500
Note:
Contact Fairchild sales for availability of other package options.
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
