To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
74LCX257 Low Voltage Quad 2-Input Multiplexer with 5V Tolerant Inputs and Outputs
May 1995
Revised September 2000
74LCX257
Low Voltage Quad 2-Input Multiplexer
with 5V Tolerant Inputs and Outputs
General Description
The LCX257 is a quad 2-input multiplexer with 3-STATE
outputs. Four bits of data from two sources can be selected
using a Common Data Select input. The four outputs
present the selected data in true (non inverted) form. The
outputs may be switched to a high impedance state by
placing a logic HIGH on the common Output Enable (OE)
input, allowing the outputs to interface directly with bus-ori-
ented systems.
The 74LCX257 is fabricated with advanced CMOS technol-
ogy to achieve high speed operation while maintaining
CMOS low power dissipation.
Features
s
5V tolerant inputs and outputs
s
2.3V–3.6V V
CC
specifications provided
s
6.0 ns t
PD
max (V
CC
=
3.3V, I
n
→
Z
n
), 10
µ
A I
CC
max
s
Power down high impedance inputs and outputs
s
Supports live insertion/withdrawal (Note 1)
s
Implements patented noise/EMI reduction circuitry
s
Latch-up performance exceeds 500 mA
s
ESD performance:
Human body model
>
2000V
Machine model
>
200V
Note 1:
To ensure the high-impedance state during power up or down, OE
should be tied to V
CC
through a pull-up resistor: the minimum value or the
resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Order Number
74LCX257M
74LCX257SJ
74LCX257MTC
Package Number
M16A
M16D
MTC16
Package Description
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
The LCX257 is a quad 2-input multiplexer with 3-STATE
outputs. It selects four bits of data from two sources under
control of a Common Data Select input. When the Select
input is LOW, the I
0x
inputs are selected and when Select
is HIGH, the I
1x
inputs are selected. The data on the
selected inputs appears at the outputs in true (non
inverted) form. The device is the logic implementation of a
4-pole, 2-position switch where the position of the switch is
determined by the logic levels supplied to the Select input.
The logic equations for the outputs are shown below:
Z
a
=
OE • (1
1a
• S
+
I
0a
• S)
Z
b
=
OE • (1
1b
• S
+
I
0b
• S)
Z
c
=
OE • (1
1c
• S
+
I
0c
• S)
Z
d
=
OE • (1
1d
• S
+
I
0d
• S)
When the Output Enable (OE) is HIGH, the outputs are
forced to a high impedance state. If the outputs are tied
together, all but one device must be in the high impedance
state to avoid high currents that would exceed the maxi-
mum ratings. Designers should ensure the Output Enable
signals to 3-STATE devices whose outputs are tied
together are designed so there is no overlap.
Truth Table
Output
Enable
OE
H
L
L
L
L
H
=
HIGH Voltage Level
L
=
LOW Voltage Level
X
=
Immaterial
Z
=
High Impedance
Select
Input
S
X
H
H
L
L
I
0
X
X
X
L
H
Data
Inputs
I
1
X
L
H
X
X
Outputs
Z
Z
L
H
L
H
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
74LCX257
Absolute Maximum Ratings
(Note 1)
Symbol
V
CC
V
I
V
O
I
IK
I
OK
I
O
I
CC
I
GND
T
STG
Parameter
Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Source/Sink Current
DC Supply Current per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature
Value
Conditions
Units
V
V
Output in 3-STATE
Output in HIGH or LOW State (Note 2)
V
I
<
GND
V
O
<
GND
V
O
>
V
CC
V
mA
mA
mA
mA
mA
−
0.5 to
+
7.0
−
0.5 to
+
7.0
−
0.5 to
+
7.0
−
0.5 to V
CC
+
0.5
−
50
−
50
+
50
±
50
±
100
±
100
−
65 to
+
150
°
C
Recommended Operating Conditions
(Note 4)
Symbol
V
CC
V
I
V
O
I
OH
/I
OL
Supply Voltage
Input Voltage
Output Voltage
Output Current
HIGH or LOW State
3-STATE
V
CC
=
3.0V
−
3.6V
V
CC
=
2.7V
−
3.0V
V
CC
=
2.3V
−
2.7V
T
A
Free-Air Operating Temperature
Input Edge Rate, V
IN
=
0.8V–2.0V, V
CC
=
3.0V
Parameter
Operating
Data Retention
Min
2.0
1.5
0
0
0
Max
3.6
3.6
5.5
V
CC
5.5
Units
V
V
V
±
24
±
12
±
8
−
40
0
85
10
mA
°
C
ns/V
∆
t/
∆
V
Note 2:
The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated
at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom-
mended Operating Conditions” table will define the conditions for actual device operation.
Note 3:
I
O
Absolute Maximum rating must be observed.
Note 4:
Unused Inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol
V
IH
V
IL
V
OH
Parameter
HIGH Level Input Voltage
LOW Level Input Voltage
HIGH Level Output Voltage
I
OH
= −100 µA
I
OH
= −8
mA
I
OH
= −12
mA
I
OH
= −18
mA
I
OH
= −24
mA
V
OL
LOW Level Output Voltage
I
OL
=
100
µA
I
OL
=
8 mA
I
OL
=
12 mA
I
OL
=
16 mA
I
OL
=
24 mA
I
I
I
OZ
I
OFF
Input Leakage Current
3-STATE Output Leakage
Power-Off Leakage Current
0
≤
V
I
≤
5.5V
0
≤
V
O
≤
5.5V
V
I
=
V
IH
or V
IL
V
I
or V
O
=
5.5V
Conditions
V
CC
(V)
2.3
−
2.7
2.7
−
3.6
2.3
−
2.7
2.7
−
3.6
2.3
−
3.6
2.3
2.7
3.0
3.0
2.3
−
3.6
2.3
2.7
3.0
3.0
2.3
−
3.6
2.3
−
3.6
0
V
CC
−
0.2
1.8
2.2
2.4
2.2
0.2
0.6
0.4
0.4
0.55
±5.0
±5.0
10
µA
µA
µA
V
V
T
A
= −40°C
to
+85°C
Min
1.7
2.0
0.7
0.8
Max
Units
V
V
3
www.fairchildsemi.com
74LCX257
DC Electrical Characteristics
Symbol
I
CC
∆I
CC
Parameter
Quiescent Supply Current
Increase in I
CC
per Input
(Continued)
V
CC
(V)
2.3
−
3.6
2.3
−
3.6
2.3
−
3.6
T
A
= −40°C
to
+85°C
Min
Max
10
±10
500
µA
µA
Conditions
V
I
=
V
CC
or GND
3.6V
≤
V
I
, V
O
≤
5.5V (Note 5)
V
IH
=
V
CC
−0.6V
Units
Note 5:
Outputs disabled or 3-STATE only.
AC Electrical Characteristics
T
A
= −40°C
to
+85°C,
R
L
=
500
Ω
Symbol
Parameter
V
CC
=
3.3V
±
0.3V
C
L
=
50 pF
Min
t
PHL
t
PLH
t
PHL
t
PLH
t
PZL
t
PZH
t
PLZ
t
PHZ
t
OSHL
t
OSLH
Propagation Delay
S→Z
n
Propagation Delay
I
n
→Z
n
Output Enable Time
OE
→Z
n
Output Disable Time
OE
→Z
n
Output to Output Skew (Note 6)
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Max
7.0
7.0
6.0
6.0
7.0
7.0
5.5
5.5
1.0
1.0
V
CC
=
2.7V
C
L
=
50 pF
Min
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Max
8.5
8.5
6.5
6.5
8.5
8.5
6.0
6.0
V
CC
=
2.5V
±
0.2V
C
L
=
30 pF
Min
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Max
9.1
9.1
7.2
7.2
9.1
9.1
6.6
6.6
ns
ns
ns
ns
ns
Units
Note 6:
Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH-to-LOW (t
ADI 近日宣布日立公司在其最新的消费类无线传输集线器 TP-WL700H 中使用 ADI 公司的 Advantiv ™高级电视解决方案 IC ，以提供高端的无线功能、灵活性和无缝高清 (HD) 连接。这款 TP-WL700H 集线器仅在日本市场供应，它是一款单机设备，专门用于为日立 Wooo UT 系列液晶电视提供无线高清娱乐内容。在日立公司最新的无线视...[详细]
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
