APPLICATION SPECIFICATION
2.0mm PITCH W/B CONN. DURACLIK
TM
ISL SERIES APPLICATION GUIDE
[PURPOSE AND SUMMARY]
이 지침서는 한국 몰렉스의 2.0mm PITCH W/B CONN. DURACLIK
TM
ISL (INDEPENDENT
SECONDARY LOCK) SERIES의 HEADER ASSY 제품 및 상대물 FEMALE CONNECTOR에 대한 취급
매뉴얼 목적으로 사용한다. (HEADER ASSY (R/A) : 502352 시리즈, HEADER ASSY (S/T) : 560020
시리즈, FEMALE CONNECTOR : 560123 시리즈, ISL RETAINER : 560125 시리즈, FEMALE
TERMINAL : 560124 시리즈 )
THE PURPOSE OF THIS MANUAL IS TO BE USED FOR USING 2.0mm PITCH W/B CONN.
DURACLIK
TM
ISL (INDEPENDENT SECONDARY LOCK) SERIES, HEADER ASSY PARTS AND COUNTER
PARTS OF FEMALE CONNECTOR (HEADER ASSY (R/A) : 502352 SERIES, HEADER ASSY (S/T) :
560020 SERIES, FEMALE CONNECTOR : 560123 SERIES, ISL RETAINER : 560125 SERIES, FEMALE
TERMINAL : 560124 SERIES )
Table of Contents
Section 1 : Product Introduction
Section 2 : Product Summary (Connector & Terminal Assembly)
Section 3 : Service Instruction (Rework Method)
Section 4 : Precaution During Continuity Inspection
Section 5 : Product Name and Part Number
REVISION:
ECR/ECN INFORMATION:
EC No:
KTR 2016-0063
DATE:
2016 / 03 / 21
CREATED / REVISED BY:
CHECKED BY:
TITLE:
SHEET No.
A
DURACLIK
TM
ISL APPLICATION GUIDE
1
of
10
JY Choi
DOCUMENT NUMBER:
APPROVED BY:
AS-560123-001
SJ Lee
BC Yoon
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
APPLICATION SPECIFICATION
1.0 PRODUCT INTRODUCTON
Characteristic and Standard
몰렉스 DuraClik™ 2.00mm (.079") pitch wire-to-board interconnect system은 진동 환½의 기기를 위한
PCB에 대한 고정과 안정적인 접속을 제공하며, 이는 wiper/blinker levers, front/back lights 및 기타
운송 수단의 내부 응용 기기에 이상적으로 적합하다.
자동차용 응용 기기의 Lighting module은 광원의 안정성과 무결성을 유지하기 위하여 더욱 높은 단자의
유지력을 요구하였다. 이에 대하여 Molex’s DuraClik
TM
2.0mm pitch connectors ISL Series는 ISL
(Independent Secondary Lock) Retainer 구조의 단자 고정 장치를 통하여 50N 이상의 단자 유지력을
확보 하였으며, 단자 원재료는 특수 동합금을 적용하여 ½쟁되는 제품 보다 뛰어난 성능으로 고객
규격에 적합한 125℃의 고온 환½에 적용이 가능하다.
새로운 Female Housing과 Retainer는 양산 제품인 DuraClik
TM
headers (502352 R/A, 560020 S/T)에
적용 가능하며, 공간 절½, 접속 안정성 및 체결 보호의 502351 DuraClik
TM
규격과 같은 Inner-lock
system을 제공한다.
본 제품은 DuraClik
TM
ISL Female Terminal (560124)를 적용하며 적용 Wire 사양은 AVSS 0.3Sq, FLRY-A
0.35Sq가 적용 가능하며, 기타 제품관련 상세한 사항은
http://www.molex.com
사이트에 방문하여 상세
사양을 확인할 수 있다.
DuraClik™ 2.00mm (.079") pitch wire-to-board interconnect system provide fixation on PCB and
stable connectivity for equipment of vibration environment. This is suitable for wiper/blinker levers,
front/back lights and other internal applied equipment of transportation etc.
Lighting module of transportation applied equipment is required to have high retention force of
terminal for maintaining light source and integrity. As to Molex’s DuraClik
TM
2.0mm pitch connectors
ISL Series, it has more than 50N retention force through ISL (Independent Secondary Lock) Retainer
structure. Raw Material is special copper alloy which could be applied in high temperature such as
125℃. New Female Housing and Retainer would be applied to DuraClik
TM
headers (502352 R/A,
560020 S/T) which already got down to Mass Production. It’s space efficiency and reliable
connectivity and Inner-lock system such as 502351 DuraClik
TM.
This product is applied to DuraClik
TM
ISL Female Terminal (560124) and applied wire specification is AVSS 0.3Sq, FLRY-A 0.35Sq. If you
want to know about more detail things, please visit
http://www.molex.com
REVISION:
ECR/ECN INFORMATION:
EC No:
KTR 2016-0063
DATE:
2016 / 03 / 21
TITLE:
SHEET No.
A
DURACLIK
CREATED / REVISED BY:
TM
ISL APPLICATION GUIDE
CHECKED BY:
2
of
10
JY Choi
DOCUMENT NUMBER:
APPROVED BY:
AS-560123-001
SJ Lee
BC Yoon
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
APPLICATION SPECIFICATION
2.0 PRODUCT SUMMARY
Female Connector &
TPA (ISL Retainer)
커넥터는 아래 그림과 같이 Female Housing과 ISL Retainer로 각각 최종 공급한다.
ISL Retainer는 고객사에 공급되어 모든 적용 단자들이 체결된 Female Housing에 체결해야 한다.
Female Housing and ISL Retainer would be applied as below. ISL Retainer would be supplied to
customer and they need to mate it with Female Housing applied all terminals.
TPA Connector Housing
체결방법
TPA의 HSG 체결방법은 아래 그림과 같다. 적용 단자가 모두 조½된 Female HSG에 TPA의 ½입
방향을 확인 후 하단 Locking부에서 “딸깍” 소리가 날 때까지 ½입한다.
Assembly method between TPA and HSG is as below. After you check out insertion direction of
TPA on Female HSG applied terminal, you insert it until you hear ‘clack’ on the bottom side of
locking area.
REVISION:
ECR/ECN INFORMATION:
EC No:
KTR 2016-0063
DATE:
2016 / 03 / 21
TITLE:
SHEET No.
A
DURACLIK
CREATED / REVISED BY:
TM
ISL APPLICATION GUIDE
CHECKED BY:
3
of
10
JY Choi
DOCUMENT NUMBER:
APPROVED BY:
AS-560123-001
SJ Lee
BC Yoon
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
APPLICATION SPECIFICATION
How to assemble Header Assembly & Female Connector
Header Assembly 제품에 Female Connector를 체결할 때, 제품의 Key-Coding 형상에 주의하며
Female Connector의 Locking부의 “딸깍” 소리가 날 때까지 ½입하여 체결을 한다.
작업자 작업 실수를 방지하고자 Fool-Proof 형상을 적용하여 입구부터 결합이 되지 않도록 하였으나,
작업 도중 고의의 과도한 힘으로 강제 ½입 시 제품이 파손 및 변형될 수 있으니 주의한다.
When mating Header Assembly with Female Connector, Need to be cautious about Key-coding
form and insert it until you hear ‘clack’ on the locking area of Female Connector. We applied Fool-
proof method from the entrance so as to prevent operator mistake. However, please aware that it
could be broken or deformed if operator insert it by force.
REVISION:
ECR/ECN INFORMATION:
EC No:
KTR 2016-0063
DATE:
2016 / 03 / 21
TITLE:
SHEET No.
A
DURACLIK
CREATED / REVISED BY:
TM
ISL APPLICATION GUIDE
CHECKED BY:
4
of
10
JY Choi
DOCUMENT NUMBER:
APPROVED BY:
AS-560123-001
SJ Lee
BC Yoon
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
APPLICATION SPECIFICATION
-. 커넥터 KEY-CODE 형상 : HEADER 및 FEMALE 하우징 별 KEY-CODE 형상 및 위치로 구분되어 해당
되는 상대 제품에 체결 됨. (아래그림 참조)
-. Connector Key-code form : Header and female housing are separated by Key-code form and
location. those are applied to mating parts. (please refer to below picture.)
REVISION:
ECR/ECN INFORMATION:
EC No:
KTR 2016-0063
DATE:
2016 / 03 / 21
TITLE:
SHEET No.
A
DURACLIK
CREATED / REVISED BY:
TM
ISL APPLICATION GUIDE
CHECKED BY:
5
of
10
JY Choi
DOCUMENT NUMBER:
APPROVED BY:
AS-560123-001
SJ Lee
BC Yoon
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
