R3 Dissipative Rubber Worksurface Mat
Meets ANSI/ESD S20.20 worksurface required limit (and recommendation
of ANSI/ESD S4.1) tested per ANSI/ESD S4.1 and ESD TR53. Resistance
to solvents, hot solder and soldering irons makes the R3 Dissipative Rubber
Worksurface Mat a versatile static-safe worksurface. Electrical performance
is accomplished by using a two-layer rubber combination of a static
dissipative colored top with a conductive black bottom. Compatible with
Continuous Workstation Monitors. Available in rolls and mat kits.
Made in the
United States of America
Properties
Thickness*
Color*
Typical Value
0.063ʺ (1.6 mm) ±0.005"
Test Method
Green/Black
Light Blue/Black
Gray/Black
Dark Blue/Black
1 x 10
6
to < 1 x 10
9
ohms
1 x 10
6
to < 1 x 10
9
ohms
65 ± 5 Shore “A”
Width +/- 0.250"
Length +/- 1"
Width +/- 0.250"
Length +/- 2"
ANSI/ESD S4.1, ESD TR53
ANSI/ESD S4.1, ESD TR53
Resistances
Surface to Ground (Rtg)
Surface to Surface (Rtt)
Hardness
Tolerance
Mat Kit
Rolls
ASTM-D2240
*Color, texture and thickness may vary between lots and mills.
Matting materials have a tendency to shrink slightly when first unrolled. In applications where
length is critical, allow the material to condition for at least 4 hours before cutting to size.
Always using care, trim with a sharp knife or razor blade.
Table Mat Kit Item Numbers
Size
Light Blue
Gray
Mat Kits are laser engraved for
branding and auditing purposes.
24" x 48"
(0.6 m x 1.2 m)
Light Blue
770074
Gray
Green
770090 770085
Table Mat Kit Includes:
1 Table Mat, size as specified
1
LPCGC151M
15' (4.6 m) Ground Cord
2
3049
Snap Kit
Dark Blue
770091
770092
770093
Includes roll of
matting material.
Roll Item Numbers
Size
Dark Blue
Grounding:
This material must be properly grounded for optimum electrical
performance. See
Grounding Cords.
Cleaning:
For optimum electrical performance, surface must be cleaned
regularly using a recommended ESD mat cleaner. Do not use cleaners with
silicone. Silicone buildup will create an insulative film on the surface.
Specifications and procedures subject to change without notice.
Light Blue
770070
770071
770072
770073
Gray
770086
770087
770088
770089
Green
770081
770082
770083
770084
2' x 50'
(0.6 m x 15.2 m)
2.5' x 50'
(0.8 m x 15.2 m)
3'
x 50'
(0.9 m x 15.2 m)
4' x 50'
(1.2 m x 15.2 m)
R3 DISSIPATIVE RUBBER WORKSURFACE MAT
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE:
StaticControl.com
PHONE (919) 718-0000
DRAWING
NUMBER
R3 Series
DATE
January
2018
©
2018 DESCO INDUSTRIES INC.
Employee Owned
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
