P-L496G-CELL01
STM32 discovery pack for 2G/3G cellular to cloud
Data brief
Features
•
STM32L496AGI6 microcontroller featuring
1 Mbyte of Flash memory and 320 Kbytes of
RAM in a UFBGA169 package
•
USB OTG HS
•
On-board current measurement
•
SAI Audio CODEC
•
ST-MEMS digital microphones
•
8-Mbit PSRAM
•
2 user LEDs
•
1 user and 1 reset push-buttons
•
4-direction joystick with selection button
•
Board connectors:
– Camera 8 bit
– USB with Micro-AB
– Stereo headset jack including analog
microphone input
– microSD™ card
•
Board expansion connectors:
– Arduino™ Uno V3
– STMod+
•
Board expansion features:
– Quectel UG96 worldwide cellular modem
penta-band 2G/3G module, 7.2 Mbps
downlink, 5.76 Mbps uplink
– Modem reset red LED and modem
signaling green LED
– ST Incard™ eSIM based on ST33
– Switchable SIM interface, eSIM and
MicroSIM
– Pulse 2G/3G SMA antenna for frequency
ranges: 850 / 900 / 1800 / 1900 / 2100 MHz
•
Flexible power-supply options: ST-LINK, USB
V
BUS
, or external sources
Picture is not contractual.
•
On-board ST-LINK/V2-1 SWD,TAG
debugger/programmer with USB re-
enumeration capability: mass storage, virtual
COM port and debug port
•
Comprehensive free software libraries and
examples available with the STM32Cube
package
•
Support of a wide choice of Integrated
Development Environments (IDEs) including
IAR™, Keil
®
, GCC-based IDEs
Description
The P-L496G-CELL01 STM32 discovery pack for
2G/3G cellular to cloud (STM32-C2C/2G-3G) is a
turnkey development platform for cellular and
cloud technology based solutions.
The pack is composed of an STM32L496AGI6-
based low-power discovery mother board with
preloaded firmware, and an STMod+ cellular
expansion board with antenna.
May 2018
DB3400 Rev 3
1/4
www.st.com
For further information contact your local STMicroelectronics sales office.
General information
P-L496G-CELL01
General information
The firmware of the P-L496G-CELL01 discovery pack runs on the STM32L496AGI6
Arm
®
-based device.
System requirements
•
Windows
®
OS (7, 8 and 10), Linux
®
64-bit or macOS
®
•
USB Type-A to Micro-B cable
Development toolchains
•
Keil
®
MDK-ARM
(a)
•
IAR™ EWARM
(a)
•
GCC-based IDEs including free SW4STM32 from AC6
Demonstration software
The STM32 Flash preloaded demonstration software yields an electronic ST Voucher and a
URL through the USB ST-Link Virtual COM port, which, through a dedicated STM32-C2C
Concierge Portal, allows the Discovery Pack owner to enable corresponding services from
ST and various partners, including many precompiled demo Flash binaries. The latest
versions of the demonstration source code and associated documentation can be
downloaded from the
www.st.com
webpage.
Ordering information
To order the P-L496G-CELL01 discovery pack refer to
Table 1.
a. On Windows
®
only
2/4
DB3400 Rev 3
P-L496G-CELL01
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
4/4
DB3400 Rev 3
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
