Not for New Designs
IFLP-4040DZ-01
www.vishay.com
Vishay Dale
Low Profile, High Current Inductors - DC Resistance Tolerance 3 %
FEATURES
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/μH, in this package size
• Handles high transient current spikes without
saturation
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
Patents Pending
• Notebook/desktop/server applications
• High current POL converters
• Low profile, high current power supplies
• Battery powered devices
• DC/DC converters in distributed power systems
STANDARD ELECTRICAL SPECIFICATIONS
HEAT
L
0
DCR
SATURATION
RATING
INDUCTANCE
±3%
CURRENT
CURRENT
± 20 % AT 100 kHz,
AT 25 °C
DC TYP.
DC TYP.
0.25 V, 0 A
(m)
(A)
(4)
(A)
(3)
(μH)
0.34
36
0.42
30
0.88
32
0.50
25
0.62
20
Notes
(1)
All test data is referenced to 25 °C ambient
(2)
Operating temperature range -55 °C to +125 °C
(3)
DC current (A) that will cause an approximate
T
of 40 °C
(4)
DC current (A) that will cause L to drop approximately 20 %
0
(5)
The part temperature (ambient + temp. rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
DIMENSIONS
in inches [millimeters]
0.400 + 0.012/- 0.006
[10.16 + 0.305/- 0.152]
0.15 ± 0.007
[3.81 ± 0.178]
0.400 + 0.012/- 0.006
[10.16 + 0.305/- 0.152]
VALUE
[DATE CODE] X
0.430 ± 0.020
[10.92 ± 0.508]
0.09 [2.286]
RECOMMENDED PAD LAYOUT
0.472
[12.0]
0.118
[3.0]
0.276
[7.0]
0.118
[3.0]
0.118
[3.0]
0.118
[3.0]
0.276
[7.0]
(NC)
0.260 ± 0.016
[6.60 ± 0.406]
No Connection
(NC)
0.080 ± 0.010
[2.03 ± 0.254]
0.260 ± 0.016
[6.60 ± 0.406]
0.09 [2.286]
0.080 ± 0.010
[2.03 ± 0.254]
The No Connection (NC) terminal must not be connected to the ground
or to any electrical traces as this will cause a short in the circuit.
DESCRIPTION
IFLP-4040DZ-01
MODEL
0.42 μH
INDUCTANCE VALUE
± 20 %
INDUCTANCE TOLERANCE
ER
PACKAGE CODE
e3
JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
F
L
P
4
0
4
SIZE
0
D
Z
E
R
R
4
2
M
TOL.
0
1
PRODUCT FAMILY
PACKAGE
CODE
INDUCTANCE
VALUE
SERIES
Revision: 07-Feb-17
Document Number: 34200
1
For technical questions, contact:
magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
