ISP Ribbon Cable - family overview
6-way 0.1" pitch ISP ribbon cable
(200mm)
Digi-key -
483-1029-ND
Equinox -
CAB-ISP6W200
20-way 0.1" pitch ISP ribbon cable for
ARM microcontrollers (200mm)
Digi-key -
483-1032-ND
Equinox -
CAB-ARM-20W
10-way 0.1" pitch ISP ribbon cable
(200mm)
Digi-key
- 483-1030-ND
Equinox
- CAB-ISP10W200
10-way 0.05" pitch ISP ribbon cable
for ARM microcontrollers - (150mm)
Digi-key -
483-1033-ND
Equinox -
CAB-ARM-10W-150
16-way 0.1" pitch ISP ribbon cable
(200mm)
Digi-key -
483-1031-ND
Equinox -
CAB-16W/16W-ISP-RIBBON
Typical layout of an ISP cable
connector (10-way)
6-way In-System Programming (ISP) Cable
(0.1" IDC connectors)
Equinox order code:
CAB-ISP6W200
Digi-key order code:
483-1029-ND
The
CAB-ISP6W200
is a
6-way
In-System Programming (ISP) ribbon cable designed to
connect from any ISP programmer which features a 6-way IDC connector to a 6-way 0.1"
pitch IDC connector on a suitable Target System. The cable features 200mm of flat ribbon
cable with a 6-way IDC 0.1" pitch female connector on each end. The IDC connectors are
fitted with 'cable grips' and are bump polarised to prevent the connector being plugged in
the wrong way around.
The
CAB-ISP6W200
cable is suitable for use with any Equinox ISP programmer and also
with any other programmer or 'Starter Kit' which features the 6-way 0.1" pitch IDC
connector. eg. Atmel AVRISP, STK500, STK501 etc.
Specification:
•
•
•
•
•
Cable length (connector to connector): 200mm
Cable type: 6-way flat ribbon cable (red stripe denotes pin 1)
Each end of the cable is terminated with a 10-way 0.1" pitch IDC female connector
Connectors are fitted with 'cable grips' for added resilience.
Connectors are bump-polarised to stop the connector being plugged in the wrong
way around
Any Equinox ISP programmer with a 6-way IDC connector eg. EPSILON5, FS2000A,
FS2003, FS2009, FS2009USB, PPM3-MK2, PPM4-MK1, ISPnano etc.
Any ISP programmer, Starter Kit or Development Board which features a 6-way IDC
connector eg. Atmel STK500, STK501, STK502, STK505 etc
Any other programmer or Target PCB which features a 0.1" pitch 6-way IDC male
connector.
This cable is compatible with the following equipment:
•
•
•
10-way In-System Programming (ISP)
Cable (0.1" IDC connectors)
Equinox Code:
CAB-ISP10W200
Digikey Code:
483-1030-ND
The
CAB-ISP10W200
is a
10-way
In-System Programming (ISP) ribbon cable designed to
connect from any ISP programmer which features a 10-way IDC connector to a 10-way
0.1" pitch IDC connector on a suitable Target System. The cable features 200mm of flat
ribbon cable with a 10-way IDC 0.1" pitch female connector on each end. The IDC
connectors are fitted with 'cable grips' and are bump polarised to prevent the connector
being plugged in the wrong way around.
The
CAB-ISP10W200
cable is suitable for use with any Equinox ISP programmer and also
with any programmer or 'Starter Kit' which features the 10-way 0.1" pitch IDC connector.
eg. Atmel STK500, STK501 etc.
Specification:
•
•
•
•
•
Cable length (connector to connector): 200mm
Cable type: 10-way flat ribbon cable (red stripe denotes pin 1)
Each end of the cable is terminated with a 10-way 0.1" pitch IDC female connector
Connectors are fitted with 'cable grips' for added resilience.
Connectors are bump-polarised to stop the connector being plugged in the wrong
way around
Any Equinox ISP programmer with a 10-way 0.1" pitch IDC connector eg. Equinox
EPSILON5, EPSILON5-MK4, FS2000A, FS2003, FS2009, FS2009USB, PPM3-MK2,
PPM4-MK4
Any ISP Starter Kit or Development Board which features a 10-way IDC connector
eg. Atmel STK500, STK501, STK502, STK505 etc
Any other programmer or Target PCB which features a 0.1" pitch 10-way IDC male
connector.
This cable is compatible with the following equipment:
•
•
•
16-way In-System Programming (ISP)
Cable (0.1" IDC connectors)
Equinox Code:
CAB-16W/16W-ISP-RIBBON
Digikey Code:
483-1031-ND
The
CAB-16W/16W-ISP-RIBBON
cable is a
16-way
In-System Programming (ISP) ribbon
cable designed to connect from any ISP programmer which features a 16-way IDC
connector to a 16-way 0.1" pitch IDC connector on a suitable Target System. The cable
features 200mm of flat ribbon cable with a 16-way IDC 0.1" pitch female connector on each
end. The IDC connectors are fitted with 'cable grips' and are bump polarised to prevent the
connector being plugged in the wrong way around.
The
CAB-16W/16W-ISP-RIBBON
cable is suitable for use with all Equinox ISPnano
programmers and also with any other programmer or 'Starter Kit' which features the 16-way
0.1" pitch IDC connector.
Specification:
•
•
•
•
•
Cable length (connector to connector): 200mm
Cable type: 16-way flat ribbon cable (red stripe denotes pin 1)
Each end of the cable is terminated with a 10-way 0.1" pitch IDC female connector
Connectors are fitted with 'cable grips' for added resilience.
Connectors are bump-polarised to stop the connector being plugged in the wrong
way around
Equinox ISPnano programmer family - ISPnano Series 3, Series IV, ISPnano-MUX
Equinox CONMOD connector module
This cable is compatible with the following equipment:
•
•
•
•
Infineon OCDS (JTAG) target boards feature a 16-way 0.1" IDC connector
Any other programmer or 'Starter Kit' which features the 16-way 0.1" pitch IDC
connector.
20-way In-System Programming (ISP)
Cable for ARM microcontrollers (0.1" IDC)
Equinox Code:
CAB-ARM-20W
Digikey Code:
483-1032-ND
The
CAB-ARM-20W
cable is a
20-way
In-System Programming (ISP) ribbon cable
designed to connect from any ISP programmer which features a 20-way IDC connector to
a 20-way 0.1" pitch IDC connector on a suitable ARM microcontroller Target System. The
cable features 200mm of flat ribbon cable with a 20-way 0.1" pitch female IDC connector on
each end. The IDC connectors are fitted with 'cable grips' and are bump polarised to
prevent the connector being plugged in the wrong way around.
The
CAB-ARM-20W
cable is suitable for use with the Equinox ISPnano programmer family
which support the 20-way ARM connector interface. This cable is also compatible with any
other programmer or 'Starter Kit' which features the 20-way 0.1" pitch IDC connector.
Specification:
•
•
•
•
•
Cable length (connector to connector): 200mm
Cable type: 20-way flat ribbon cable (red stripe denotes pin 1)
Each end of the cable is terminated with a 20-way 0.1" pitch IDC female connector
Connectors are fitted with 'cable grips' for added resilience.
Connectors are bump-polarised to stop the connector being plugged in the wrong
way around
Equinox ISPnano programmer family - ISPnano Series 3, Series IV, ISPnano-MUX
Equinox CONMOD connector module
Any other ARM microcontroller programmer, ARM 'Starter Kit' or ARM 'evaluation
board' which features the standard ARM 20-way 0.1" pitch IDC connector.
This cable is compatible with the following equipment:
•
•
•
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
