To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
74LCX16373 Low Voltage 16-Bit Transparent Latch with 5V Tolerant Inputs and Outputs
February 1994
Revised May 2005
74LCX16373
Low Voltage 16-Bit Transparent Latch
with 5V Tolerant Inputs and Outputs
General Description
The LCX16373 contains sixteen non-inverting latches with
3-STATE outputs and is intended for bus oriented applica-
tions. The device is byte controlled. The flip-flops appear
transparent to the data when the Latch Enable (LE) is
HIGH. When LE is LOW, the data that meets the setup time
is latched. Data appears on the bus when the Output
Enable (OE) is LOW. When OE is HIGH, the outputs are in
a high impedance state.
The LCX16373 is designed for low voltage (2.5V or 3.3V)
V
CC
applications with capability of interfacing to a 5V signal
environment.
The LCX16373 is fabricated with an advanced CMOS tech-
nology to achieve high speed operation while maintaining
CMOS low power dissipation.
Features
s
5V tolerant inputs and outputs
s
2.3V–3.6V V
CC
specifications provided
s
5.4 ns t
PD
max (V
CC
3.3V), 20
P
A I
CC
max
s
Power down high impedance inputs and outputs
s
Supports live insertion/withdrawal (Note 1)
s
r
24 mA output drive (V
CC
3.0V)
s
Uses proprietary noise/EMI reduction circuitry
s
Latch-up performance exceeds 500 mA
s
ESD performance:
Human body model
!
2000V
Machine model
!
200V
s
Also packaged in plastic Fine-Pitch Ball Grid Array
(FBGA)
Note 1:
To ensure the high-impedance state during power up or down, OE
should be tied to V
CC
through a pull-up resistor: the minimum value or the
resistor is determined by the current-sourcing capability of the driver.
3-STATE standard outputs. The device is byte controlled
with each byte functioning identically, but independent of
the other. Control pins can be shorted together to obtain full
16-bit operation. The following description applies to each
byte. When the Latch Enable (LE
n
) input is HIGH, data on
the I
n
enters the latches. In this condition the latches are
transparent, i.e. a latch output will change state each time
its I input changes. When LE
n
is LOW, the latches store
information that was present on the I inputs a setup time
preceding the HIGH-to-LOW transition of LE
n
. The
3-STATE standard outputs are controlled by the Output
Enable (OE
n
) input. When OE
n
is LOW, the standard out-
puts are in the 2-state mode. When OE
n
is HIGH, the stan-
dard outputs are in the high impedance mode but this does
not interfere with entering new data into the latches.
Logic Diagrams
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
3
www.fairchildsemi.com
74LCX16373
Absolute Maximum Ratings
(Note 4)
Symbol
V
CC
V
I
V
O
I
IK
I
OK
I
O
I
CC
I
GND
T
STG
Parameter
Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Source/Sink Current
DC Supply Current per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature
Value
Conditions
Units
V
V
Output in 3-STATE
Output in HIGH or LOW State (Note 5)
V
I
GND
V
O
GND
V
O
!
V
CC
V
mA
mA
mA
mA
mA
0.5 to
7.0
0.5 to
7.0
0.5 to
7.0
0.5 to V
CC
0.5
50
50
50
r
50
r
100
r
100
65 to
150
q
C
Recommended Operating Conditions
(Note 6)
Symbol
V
CC
V
I
V
O
I
OH
/I
OL
Supply Voltage
Input Voltage
Output Voltage
Output Current
HIGH or LOW State
3-STATE
V
CC
V
CC
V
CC
T
A
Free-Air Operating Temperature
Input Edge Rate, V
IN
0.8V–2.0V, V
CC
3.0V
3.0V
3.6V
2.7V
3.0V
2.3V
2.7V
Parameter
Operating
Data Retention
Min
2.0
1.5
0
0
0
Max
3.6
3.6
5.5
V
CC
5.5
Units
V
V
V
r
24
r
12
r
8
40
0
85
10
mA
q
C
ns/V
'
t/
'
V
Note 4:
The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated
at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom-
mended Operating Conditions” table will define the conditions for actual device operation.
Note 5:
I
O
Absolute Maximum Rating must be observed.
Note 6:
Unused inputs must be held HIGH or LOW. They may not float.
这标志着在物流供应链打印中处于全球领先地位的美国普印力PRINTRONIX更加看好中国市场，进一步加大在中国的投资力度，依托国际性分销商和本土的行业巨头进一步深入中国市场。 来自政府相关部门的领导、自动识别行业专家、行业客户代表以及新闻媒体出席了新闻发布会，普印力全球高级销售总裁James B. McWilson以及大中华区总经理Roger Zhao出席会议，与闪联总裁孙育宁博士现场...[详细]
传感器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
