MMCX Right Angle Plug for RG-178, RG-316, RG-316 DS and
RG-179 Size Flexible Cable
1. Identify connector parts. (3 piece parts)
2. Strip cable jacket to dimensions shown. Do not nick braid or center
conductor during strip operations. Tin center conductor. Slide crimp
sleeve onto cable jacket.
3. Flair braid and assemble crimp stem of body subassembly under
braid onto cable making certain that the cable center conductor enters
contact slot as shown. Arrange braid uniformly around crimp stem.
Slide crimp sleeve over braid and crimp securely using recommended
crimp hex.
4. Solder center conductor to contact through rear access prot. Use a
minimum amount of solder for a full fillet joint.
5. Press end cap into body access port using .
156 (3.96) diameter flat punch or Johnson assembly tool
141-000-910.
Cable Group
RG-178, 196
RG-316/U, 188, 187, 179
RG-316 DS, 188 DS
Part No.
135-3402-111
135-3403-101
135-3404-101
Crimp Hex
.105 (2.67)
.128 (3.25)
.151 (3.83)
“A”
.310
.295
.295
“B”
.100
.105
.105
“C”
.035
.075
.075
221
Cinch Connectivity Solutions Waseca
299 Johnson Avenue SW, Suite 100
Waseca, MN 56093 USA
© 2017 Cinch Connectors, Inc.
+1 507.833.8822
inquiry@cinch.com
cinch.com
ccsjai 02.17