RNX
www.vishay.com
Vishay Dale
Metal Oxide Resistors, Special Purpose, High Voltage
FEATURES
• Low TCR: ± 200 ppm/°C standard;
± 100 ppm/°C; ± 50 ppm/°C available
• Tolerance: ± 1 % standard to 1 G; ± 5 %
above 1 G; ± 0.5 % available in ± 50 ppm/°C
only. Special tolerance and/or temperature
coefficient matching available.
• High voltage (up to 8 kV)
• For oil bath or open air operation
• Matched sets available
• Special testing available upon request
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
Note
*
Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
GLOBAL
MODEL
HISTORICAL
MODEL
P
25 °C
W
0.5
(1)
P
70 °C
W
0.36
(1)
P
125 °C
W
0.25
(1)
MAXIMUM
WORKING
VOLTAGE
(2)
V
750
RESISTANCE
RANGE
(3)
1M to 22M
1K to 100M
100 to 100K
1M to 50M
1K to 100M
1K to 1G
100 to 100K
1M to 100M
1K to 250M
1K to 2G
100 to 100K
1M to 100M
1K to 500M
1K to 2G
100 to 100K
1M to 100M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
1K to 500M
1K to 2G
100 to 1M
TOLERANCE
±%
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
0.5, 1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
TEMPERATURE
COEFFICIENT
± ppm/°C
50
100, 200
Non-inductive
(4)
50
100
200
Non-inductive
(4)
50
100
200
Non-inductive
(4)
50
100
200
Non-inductive
(4)
50
100
200
Non-inductive
(4)
100
200
Non-inductive
(4)
100
200
Non-inductive
(4)
100
200
Non-inductive
(4)
RNX025
RNX-1/4
RNX038
RNX-3/8
1.0
0.72
0.5
1.5K
RNX050
RNX-1/2
1.2
0.86
0.6
2K
RNX075
RNX-3/4
2.0
1.44
1.0
3K
RNX100
RNX-1
2.5
1.8
1.25
4K
RNX125
RNX-1-1/4
3.0
2.16
1.5
5K
RNX150
RNX-1-1/2
4.0
2.88
2.0
6K
RNX200
RNX-2
5.0
3.6
2.5
8K
Notes
•
All resistance values are calibrated at 100 V
DC
. Calibration at other voltages available.
• Part marking: Print marked - DALE, model, value, tolerance, TCR, date code (model and date omitted on RNX-1/4)
• Special modifications:
- Special preconditioning (power aging, temperature cycling etc.) to customer specifications
- Non-helixed resistors can be supplied for critical high frequency applications (non-inductive)
(1)
Increase wattage by 25 % for 0.032" (0.813 mm) diameter leads
(2)
Continuous working voltage shall be
P
x
R
or maximum working voltage, whichever is less.
(3)
For resistance values above and below those listed please contact us
(4)
Non-inductive ± 200 ppm/°C TCR only
Revision: 19-Sep-12
Document Number: 31032
1
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RNX
www.vishay.com
Vishay Dale
RNX025
RNX038
RNX050
RNX075
RNX100
RNX125
RNX150
RNX200
TECHNICAL SPECIFICATIONS
PARAMETER
Insulation Resistance
Category Temperature Range
UNIT
°C
10
11
Epoxy coated = - 55/+ 150; silicone coated = - 55/+ 225
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNX05010K0KKLB (preferred part numbering format)
R
N
X
0
5
0
1
0
K
0
K
K
L
B
CONSTRUCTION
Blank = Standard
N
= Non-inductive
P
= 0.032" Ø leads
GLOBAL
RESISTANCE
MODEL
VALUE
(See Standard
R
=
Ω
K
= kΩ
Electrical
M
= MΩ
Specifications
G
= GΩ
table)
910R
= 910
Ω
10M0
= 10 MΩ
1G00
= 1.0 GΩ
TOLERANCE
TEMP.
CODE
COEFFICIENT
D
= ± 0.5 %
H
= 50 ppm
K
= 100 ppm
F
=±1%
N
= 200 ppm
G
=±2%
J
=±5%
K
= ± 10 %
PACKAGING
(1)
EL
= Lead (Pb)-free, lacer
EE
= Lead (Pb)-free, T/R
(1/4, 3/8, 1/2, 3/4, 1 only)
LB
= Tin/lead, lacer
RC
= Tin/lead, T/R
(1/4, 3/8, 1/2, 3/4, 1 only)
SPECIAL
Blank = Standard
(Dash number)
(Up to 3 digits)
From
1 to 999
as applicable
Historical Part Number example: RNX-1/210K0KK (will continue to be accepted)
RNX-1/2
HISTORICAL
MODEL
CONSTRUCTION
10K0
RESISTANCE
VALUE
K
TOLERANCE
CODE
K
TEMP.
COEFFICIENT
L05
PACKAGING
Notes
(1)
Some packaging codes are model specific
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
DIMENSIONS
in inches (millimeters)
GLOBAL MODEL
1.50 ± 0.125
(38.10 ± 3.18)
0.025 ± 0.002
(1)
(0.64 ± 0.05)
L
0.290 ± 0.020 (7.37 ± 0.51)
0.420 ± 0.020 (10.67 ± 0.51)
0.540 ± 0.020 (13.72 ± 0.51)
0.790 ± 0.020 (20.07 ± 0.51)
1.040 ± 0.020 (26.42 ± 0.51)
1.290 ± 0.020 (32.77 ± 0.51)
1.540 ± 0.020 (39.12 ± 0.51)
2.040 ± 0.020 (51.82 ± 0.51)
L
1 MAX.
0.358 (9.09)
0.470 (11.94)
0.595 (15.11)
0.845 (21.46)
1.100 (27.94)
1.350 (34.29)
1.600 (40.64)
2.100 (53.34)
L
L
1 max.
0.140 + 0.015 - 0.010
(3.56 + 0.38 - 0.25)
RNX025
RNX038
RNX050
RNX075
RNX100
RNX125
RNX150
RNX200
(1)
Note
Available with 0.032" (0.813 mm) leads ± 0.002" (0.051 mm)
% RATED POWER
120
100
80
60
40
20
0
0
50
100
150
200
250
EPOXY
COATING
SILICONE
COATING
MATERIAL SPECIFICATIONS
Element
Core
Coating
Termination
High temperature fired cermet film
High purity 96 % alumina
Flame-retardant epoxy on RNX025 and
RNX038, flameproof silicone on RNX050
to RNX200
Standard lead material is solder-coated
copper. Solderable and weldable.
MECHANICAL SPECIFICATIONS
Terminal Strength
Solderability
5 pound pull test
Continuous satisfactory coverage when tested
in accordance with MIL-STD-202, method 208
DERATING
AMBIENT TEMPERATURE IN °C
Revision: 19-Sep-12
Document Number: 31032
2
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RNX
www.vishay.com
0
AVERAGE V.C., ppm/V
Vishay Dale
- 10
- 20
10
6
10
7
10
8
- 1/4
- 3/8
10
9
- 3/4, - 1
- 1 1/4, - 1 1/2
10
10
- 1/2
VOLTAGE COEFFICIENT
-2
RESISTANCE (Ω)
Revision: 19-Sep-12
Document Number: 31032
3
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
