OM13073
LPCXpresso43S37 Development Board
Rev. 1.1 — February 6, 2015
Product Brief
The LPCXpresso family of boards provides a powerful and flexible development system for NXP's
Cortex-M MCUs. The LPCXpresso43S37 board has been developed by NXP to enable evaluation of and
prototyping with the LPC4300 family of MCUs, and features the LPC43S37 in its 100 PIN BGA package
option.
Feature summary
The LPCXpresso43S37 board includes the following features:
LPC43S37 dual-core (M4F and M0+) MCU running at up to 208MHz
A7001CM Secure Element
On-board high-speed USB based debug probe with CMSIS-DAP and LPCXpresso IDE Redlink
protocol options, can debug the on-board LPC43S37 or external target
Support for external debug probes
Tri-color LED
Target Reset, ISP and WAKE buttons
Expansion options based on Arduino UNO R3 and Pmod™, plus additional expansion port pins
On-board 1.8/3.3V or external power supply options
On-board Ethernet PHY (output available at expansion connectors)
High speed USB A/B connector for host or slave operation
8Mb Macronix quad SPI flash
UART, I
2
C and SPI port bridging from LPC43S37 target to USB via the on-board debug probe
FTDI UART connector
LPCXpresso IDE
LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSIS-
DAP debug interface, or with an external debug probe such as LPC-Link2. LPCXpresso43S37 is ready
for use with the LPCXpresso IDE. An external debug probe can be used by simply connecting it to the
board via the P1 connector and powering the board via the J3 USB connection.
© NXP B.V. 2015.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
OM13073
LPCXpresso43S37 Development Board
Rev. 1.1 — February 6, 2015
Partner development tools
Product Brief
The LPCXpresso43S37 board can be used with development tools from NXP partners including Atollic,
Keil, IAR, Rowley and SEGGER. The board is pre-programmed with CMSIS-DAP firmware, so can also
be used with these tool-chains by setting the on-board debug probe to boot from flash (removing the JP3
jumper). Please refer to our partners for details on using their tools with the board.
LPCOpen drivers and examples
LPCOpen software packages allow users to quickly and easily utilize NXP's extensive array of
microcontroller software libraries to create and develop multifunctional products. Drivers for the
LPCXpresso43S37 board can be downloaded for free at
http://www.lpcware.com/lpcopen
.
Board specifications
Recommended operating conditions: 0 to 70
o
C ambient
Weight: 1.1 ounces
Size: 123 x 59mm (4.8 x 2.3 inches) including connectors
The LPCXpresso43S37 board is RoHS compliant.
© NXP B.V. 2015.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
