50: AC Safety Volt Check 50
APPLICATIONS
Check for presense
or absence of AC
voltage in:
Non-Contact Detection of 50-1,000 VAC
Sound & Visual Alert!!
The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires,
• Wires
• Wall Receptacles
• Fuses
• Junction Boxes
• Switches
• Defective Grounds
• Any other Voltage
Carrying Electrical
System
wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not
necessary to disconnect the system in question because no contact is required for operation and current flow is
not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated
wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow
bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as
a troubleshooting instrument.
shown actual size
FEATURES
Prevent electrical shocks
Non-contact detection of 50 to 1,000 VAC
Troubleshoot electrical circuits
No switch required. Always ready for
use
Competing products require an
ON/OFF switch.
Sound & Visual Alert
Sound and bright red glow indicates
voltage. Buzzer will not react to static
electricity, only AC voltage.
APPLICATIONS
The
Value
Leader
™
Uses 2 AAA batteries
Common and inexpensive. Competing
producs require more expensive camera
batteries
Lifetime Warranty
AC Voltage in
switches
AC Voltage in
wall receptacles
AC Voltage in
junction boxes
...and many additional applications where voltage needs
to be detected
Additional Safety Volt Testers
TPI offers a
complete
line of…
CO, Combustibles &
Combustion (CEA)
Refrigerant Leak
Detectors
Digital Manometers
Temperature
Contact & IR
Instruments
IAQ: Air Flow &
Humidity
Handheld
Oscilloscopes
Digital Multimeters
& Clamp-on Meters
Accessories & Kits
AC Safety Volt Check
45
Non-Contact Detection of 50-1,000 VAC w/ Visual Alert
The TPI 45 is essential to anyone determining the presence or absence of electrical voltage
between 50-1,000 AC. The TPI 45 allows the user to detect a defective ground before an
individual is exposed to injury. Simply touch the plastic tip to a connection point or move it along
a wire. If AC voltage is present, the tip will glow red.
Defective grounds can cause either voltage or an electrical field to be present on a metal casing.
Both of these conditions can be detected by using the TPI 45.
Features:
• Detects 50-1,000 Volts AC
• Bright red glow indicates voltage
• Senses voltage without metallic contact
• UL listed
• “AAA” alkaline batteries included
What markets should have the TPI 45?
• Electrician
• Manufacturing
• Electronics
• Safety
• Emergency
• Vending Companies
• Home Owners
• Sign
• Maintenance
• HVAC
Test Products
International, Inc.
Headquarters:
9615 SW Allen Blvd.
Beaverton, OR 97005
USA
503-520-9197
Fax: 503-520-1225
e-mail:
info@tpi-thevalueleader.com
Low AC Locator
40
Test Products
International, Ltd.
342 Bronte St. South
Unit #9
Milton, Ontario L9T
5B7
Canada
905-693-8558
Fax: 905-693-0888
e-mail:
info@tpicanada.com
Non-Contact Detection of 24-90 VAC w/ Visual Alert
The TPI 40 is essential to anyone determining the presence or absence of electrical voltage
between 24-90 VAC. Use the TPI 40 for checking lawn irrigation equipment, thermostat controls,
vending machine changers, and other low voltage equipment.
• Sensor glows red in the presence of AC voltage
• Detects 24-90 Volts AC
• Sensed voltage without metallic contact
• UL listed
• “AAA” alkaline batteries included
What markets should have the TPI 40?
• HVAC
• Irrigation
• Plumbing
• Vending
Test Products
International UK Ltd.
Longley House,
East Park
Crawley, West Sussex
RH10 6AP England
Tel:
+44 (0)1293 561212
Fax:
+44 (0)1293813465
contactus@tpieurope.com
To learn about the entire
line of TPI products visit:
www.tpi-thevalueleader.com
L AC50-1005
Copyright © 2005 Test Products International, Inc.