LED50WPR2T5 Series
Programmable LED Driver
Rev 07-19-2017
Electrical Specifications
Input Voltage Range:
Frequency:
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Line Regulation:
Load Regulation:
THD:
Ripple Current:
Start-up Time:
120-277 Vac Nom. (108-305 V Min/Max)
50/60 Hz Nom. (47-63 Hz Min/Max)
≥ 0.90 @ ≥ 60% load, 120Vac-277Vac
< 20.0 Amps max @ 277 Vac
0.59 Amps @ 120 Vac, 60Hz
0.25 Amps @ 277 Vac, 60Hz
50W
± 3%
± 4%
≤ 20% @ ≥ 60% full load
4% (max)
1 sec. typical
E332160
TYPE
TL
Protections
Over-voltage
Short Circuit
Yes
Auto Recovery
Environmental Specifications
Maximum Case Temp.
Type TL Rating:
Minimum Starting Temp:
Storage Temperature:
Humidity:
Cooling:
Vibration Frequency:
Sound Rating:
Lifetime:
MTBF:
EMC:
80°C
xx°C/ xx°C
-20ºC
-25ºC to +80 ºC
Up to 90% RH
Convection
5 to 55 Hz/2g, 30 minutes
Class A
50,000 Hours, 50ºC @ Tc point
(see Lifetime graph for lifetimes at different
temperatures)
352,000 hours @ Full Load per MIL-217F
Notice 2
FCC 47CFR Part 15 Class A compliant
• Simple programming with USB cable
• Linear dimming curve
• Adjustable Output Current: 500-1400mA
• UL Dry & Damp Location Rated, Class 2,
Type TL
• Dim to 10% with 0-10V dimming
• Metal housing
Constant Current - Product Specifications
Model Number
LED50WPR2T5-050-C1400-D
Output Current
(mA)
500-1400
Output Voltage
(Vdc)
20-50
Max Output
Power
(W)
50
Type TL
Rating
89/75ºC
Class 2:
Typical
Efficiency
83%
US/Canada
Programming cable is a 1m USB cable with 3-pin
connector and programming button. Resistance
and current is marked on the label. Other output
currents and cables available upon request.
Programming Key
TRP Catalog #
PR2-C0500-C3
PR2-C0530-C3
PR2-C0700-C3
PR2-C0830-C3
PR2-C1000-C3
PR2-C1050-C3
PR2-C1190-C3
PR2-C1250-C3
PR2-C1400-C3
Nominal Output
Current (Amps)*
0.500
0.530
0.700
0.830
1.000
1.050
1.190
1.250
1.400
Actual Output Current
(Amps)
0.507
0.522
0.691
0.827
1.000
1.043
1.175
1.248
1.404
Safety Certification
UL/CUL
CE
Standard
UL8750, UL60950 for UL Class 2 & CAN/CSA C22.2 No. 250.13,
UL Type TL xx/xx°C
EN61347-1, EN61347-2-13
• 2-stage power supply design for better performance over
wide range of outputs
• Simple programming with USB dongle
• Built-in step-dimming control
• Linear dimming curve
• NTC option allows for themal protection of LED engine
• Flicker free output for comfort and critical applications
• Adjustable Output Current: 100-1500mA
• UL Dry & Damp Location Rated, Class 2, Type TL
• Dim to zero with DC 0-10V dimming
• Metal housing
EMC Standard
FCC, 47CFR Part 15
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61000-4-5
EN 61547
Notes
Class B
Limits and methods of measurement of radio disturbance characteristics of
electrical lighting and similar equipment.
Part 3-2: Limits for harmonic current emissions Class C, ≥80%
Rated Power
Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker.
Part 4-5: Surge Immunity test, 2 kV L-N, 4 kV L-FG & N-FG
ESD (Electronstatic Discharges); Class B
Energy Star transient protection: Ballast or driver shall comply with ANSI/IEEE
C62.41.1-2002 and ANSI/IEEE C62.41.2-2002, Category A operation. The line
transient shall consist of seven strikes of a 100 kHz ring wave, 2.5 kV level, for
both common mode and differential mode.
Energy Star
© 2017 Thomas Research Products. Specifications subject to change without notice.
Pg 1 of 3
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED50WPR2T5 Series
Programmable LED Driver
Dimensions
11.81 [300]
11.19 [284.2]
0.68 [17.3]
IN [mm]
0.55 [14]
0.20 [5.2]
5.75 [146.0]
9.76 [248]
Ø 0.17 [4.2]
0.748 [19.0]
Tc Point = 89ºC Max
0.35 [9.0]
Insulation
Strip Length
0.46 [11.7]
Wire Gauge:
AWG 22-18
0.6-1.0 mm
2
1.18 [30]
Power Characteristics
Power Factor VS. Output Power
THD VS. Output Power
120V = 1.4A
277V = 1.4A
277V = 0.5A
1.10
1.00
0.90
30%
25%
20%
100%
95%
Efficiency / Load
120V = 1.4A
277V = 1.4A
120V = 0.5A
277V = 0.5A
Efficiency
120V = 0.5A
90%
85%
80%
75%
THD
PF
0.80
0.70
0.60
0.50
40%
60%
80%
120V = 1.4A
277V = 1.4A
120V = 0.5A
277V = 0.5A
15%
10%
5%
Load
100%
0%
40%
60%
Load
80%
100%
70%
40%
60%
80%
100%
Load
Power Operating Window
Lifetime / Case Temperature
60
55
50
45
OPERATING WINDOW
Vout (Vdc) vs. Output Current (mA)
PF>0.9, THD<20% for 277Vin
(120Vin for All Area)
140
120
Lifetime
(kHrs)
100
80
60
40
20
0
50
55
60
65
70
75
80
85
90
95
Vout (Vdc)
40
35
30
25
20
15
10
50W
Working
Area
10W
100
200
300
400
500
600
700
800
900
1000
Rated
Area
Case Hotspot Temperature
(°C)
1100
1200
1300
1400
1500
Iout (mA)
Note:
The area under the life-temperature curve represents where the driver has highly reliable operation within specification. Driver performance may drift out of published specifications
as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental
factors affect driver lifetime but are not represented in this calculation.
© 2017 Thomas Research Products. Specifications subject to change without notice.
Pg 2 of 3
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
0.83 [21]
INPUT
Green (GND)
Black (L)
White (N)
Case must be grounded in end-use application
PUSH IN CONNECTORS
OUPUT
Red (LED+)
Blue (LED-)
Purple (DIM+)
Gray (DIM+)
3 PIN RSET
Gray (RSET)
Gray (COM)
0.17 [4.2]
1.18 [30]
0.69 [17.5]
LED50WPR2T5 Series
Programmable LED Driver
Wiring
+
-
LED ENGINE
LED Driver
GROUND
LINE
NEUTRAL
(Green)GROUND
(Black) LINE
(White) NEUTRAL
(Red) LED +
(Blue) LED -
(Purple) DIM +
(Gray) DIM -
PURPLE +
GRAY -
0-10V
DIMMER
or CONTROL
Trigger, Rset,GND
USB
RSET CABLE
Programming Guide
Note that the driver does NOT need to be connected to AC power to be programmed. The cable assembly should have
the output current and resistance on the label. Note that each setup cable corresponds to a specific output current value.
1) Plug the 3-pin cable connector into the 3-pin connector on the driver.
2) Plug the USB connector of the cable into an active USB port. The USB port only has to provide +5V to the driver.
3) Push and hold the button on the USB cable for approximately 0.5 to 1 second to program the driver current.
To keep the programmed value, go to step 5. If the driver needs to be reset to the default current value, go to step 4.
4) Push and hold the button on the USB cable for >6 seconds to reset teh driver current to the default value of 1.4A.
5) Remove the setup cable when done programming. The driver is ready for use.
0-10VDC Dimming
Parameters
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Minimum
0 mA
-2.0 V
Typical
—-
—-
Maximum
1.5 mA
+15 V
Typical Dimming Circuit: 2-Wire Resistance
DIM+
Purple Wire
Leviton IP710
Wall Dimmer
(Example)
Typical Dimming Circuit: 2-Wire 0-10V Analog
DIM+
Purple Wire
V
COM
Gray Wire
0-10V Sink
Driver
COM
Gray Wire
Driver
0-10V Dimming Notes:
Output Current (mA)
1. Part comes with two dimming input connectors
+Purple/-Gray on the output side.
2. Part is compatible with most 0-10V Wall Slide
dimmers and 0-10V dimming.
3. Output current will be 10% when Vdim ≤0.60V.
4. Output will be 100% with Purple/Gray open
and 10% with Purple/Gray Shorted.
Labeling Programmable Drivers:
It is highly recommended that the drivers be labeled with
information traceable to the programmed current.
This
information is critical to answering any field questions
from the contractor or end user.
1800
1600
1400
1200
1000
800
600
400
200
0
Operating Current Behavior by AD Voltage
0V
1V
2V
3V
4V
AD Voltage
(V)
5V
6V
7V
8V
9V
10V
© 2017 Thomas Research Products. Specifications subject to change without notice.
Pg 3 of 3
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
