Series 222G
6.0x3.8mm Compact Tactile Switch
Surface mount gull-wing and J bend terminal configurations
Compatible with IR reflow and manual soldering
Variety of operating force & actuator height options
Ordering Information
Series
222G
Terminal
Type
M
Actuating
Direction
V
Actuator
Height “L”
A
Actuator
Force
A
B
Packaging
R
Travel
S
Code
M
J
Spec.
Surface mount gull wing
Surface mount J bend
Code
A
B
Spec.
160 gf, black
260 gf, white
Code
Blank
S
Spec.
0.25mm
0.15mm
Code
V
Spec.
Vertical
Code
R
Spec.
Tape & reel packaging
Code
A
Spec.
2.5mm
Notes: Contact CTS for other common features not listed.
2018-7-30 Rev. A
Page 1 of 5
© 2018 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 222G
Tactile Switch
Electrical Specifications
Parameter
Contact Resistance
Insulation Resistance
Dielectric Strength
Nonswitching Rating
Between insulated
terminals
1 minute between
adjacent switches
100
250
50
or
12
Conditions & Remarks
Min
Max
50
Unit
milliohms
Megohms
VAC
mA
or
VDC
Mechanical and Environmental
Soldering
RoHS
Operating Force
Actuation Life
Actuator Strength
Travel
Packaging
Operating Temperature
Range
Storage Temperature
Range
Maximum reflow temperature, 260°C for 5 seconds
Maximum manual temperature, 350°C for 3 seconds
Lead-Free. Fully compliant to RoHS Directive 2011/65/EU
160 or 260 gf
160 gf: 100,000 cycles
260 gf: 100,000 cycles
3 Kgf maximum
0.15/0.25mm
Standard tape and reel packaging
-40°C to +85°C
-40°C to +85°C
2018-7-30 Rev. A
Page 2 of 5
© 2018 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 222G
Tactile Switch
Mechanical Specifications
Figure 1 – 222GM…, Surface Mount Gull Wing, Short Travel
Figure 2 – 222GM…, Surface Mount Gull Wing, Long Travel
2018-7-30 Rev. A
Page 3 of 5
© 2018 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 222G
Tactile Switch
Figure 3 – 222GJ…, Surface Mount J Bend Terminal, Short Travel
Figure 4 – 222GJ…S, Surface Mount J Bend Terminal, Long Travel
2018-7-30 Rev. A
Page 4 of 5
© 2018 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 222G
Tactile Switch
Packing: Tape and Reel
Surface Mount Gull Wing/J Bend Terminal
The packing specifications :
Structure and materials：
③ COVER TAPE
② CARRIER TAPE
① REEL
NO. PARTS NAME
1.
2.
3.
4.
5.
6.
7.
POLYESTER
POLYSTYRENE
POLYSTYRENE
MATERIALS
Packing quantity：3,000 pcs/reel
More than 10 empty pockets should remain at each end of the carrier tape for each reel.
Shortage less than 10 pcs a reel is acceptable but more than 3 consecutive empty pockets are not
allowed.
Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within
165°~180°.
The product in the pocket of carrier tape should be placed in a specified correct position.
Tape and reel per EIA-481.
Dimensions：
2018-7-30 Rev. A
Page 5 of 5
© 2018 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
