UHF RFID Inlays
AD-227m5
Dimensions
Operating Frequency
RF Protocol
Chip
EPC Memory
TID Memory
USER Memory
3.741 x 0.326 in [95.03 x 8.15 mm]
Global (860 – 960 MHz)
ISO-18000-6C, EPC Class 1, Gen 2
Imping Monza 5
128 bit
48-bit unique serialized TID number
32 bit
Common Applications
Item Level Retail & Apparel
Supply Chain, Inventory & Logistics
Returnable Transport Units (RTUs)
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
PART NUMBER
Format
Antenna dimensions
(CD x MD)
Die-cut dimensions
Inlay substrate material
Inlay-to-liner adhesive
Liner material
Face Sheet
Standard pitch
Standard web width
Total thickness over chip
Operating temperature
RoHS
Quality assurance
Un-wind direction
Core size with adaptor insert
Maximum roll outer diameter
(not to exceed)
Average # of units per roll
Rev
600367
600375 [Reverse Wind]
Dry Inlay
3.741 x 0.326 in [95.03 x 8.15 mm]
N/A
PET
N/A
N/A
N/A
0.625 in [15.88 mm]
3.875 in [98.43 mm]
10-13 mils [254-330.2 microns]
-40 to 185 F [-40 to 85 C]
EU Directive 2011/65/EU Compliant
100% read tested with-of-tolerance
inlay marked
Inlay-side Out
6 in [152 mm]
12 in [304 mm]
600366 [Wide Web]
Dry Inlay
3.741 x 0.326 in [95.03 x 8.15 mm]
N/A
PET
N/A
N/A
N/A
0.625 in [15.88 mm]
4.75 in [120.65 mm]
10-13 mils [254-330.2 microns]
-40 to 185 F [-40 to 85 C]
EU Directive 2011/65/EU Compliant
100% read tested with-of-tolerance
inlay marked
Inlay-side Out
6 in [152 mm]
12 in [304 mm]
600368
Wet Inlay
3.741 x 0.326 in [95.03 x 8.15 mm]
3.885 x 0.44 in [98.7 x 11.2 mm]
PET
S-490 (FASSON)
1.5M Clear PET
N/A
0.625 in [15.88 mm]
4.125 in [104.78 mm]
14-17 mils [356-431.8 microns]
-40 to 185 F [-40 to 85 C]
EU Directive 2011/65/EU Compliant
100% read tested with-of-tolerance
inlay marked
PS Inlay-side Out
3 in [ 76 mm]
12 in [304 mm]
20,000 good +/- 10%
02
20,000 good +/- 10%
02
20,000 good +/- 10%
02
Care and handling:
RFID inlays are sensitive to ESD. Observe standard industry practices relating to
electronics/RFID to keep environmental impact and static charge to a minimum.
Applications:
This product should be tested by the customer/ user thoroughly under end use conditions to ensure
the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any
particular purpose or use.
Warranty:
Please refer to Avery Dennison RFID standard terms and conditions.
Product Information:
Avery Dennison reserves the right to modify, change, supplement or discontinue product
offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison
makes no representation concerning the accuracy or correctness of the data.
Trademark statement:
Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the
most recent information on Avery Dennison products, visit
www.rfid.averydennison.com.
© 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
