Disconnect switches —
11
Contents
200 kA SCCR in
2/3 the
footprint
of traditional
fusible switches
Description
Compact Circuit Protector (CCP) disconnect switches
Class CC, UL supplemental and IEC 10x38mm (CCP)
Class CF CUBEFuse (CCP-CF)
Compact Circuit Protector Base (CCPB)
Low profile Class CC and G, UL supplemental and IEC
10x38mm (CCPLP)
UL 98 fused disconnect switches, 30 to 800 A
Introduction and agency information
Product line summary — UL
30 A Class CC and compact Class J
30 A standard Class J
60 A compact Class J
60 A standard Class J
100 A standard Class J
200 A and 400 A standard Class J
600 A standard Class J and 800 A Class L
UL 98 non-fused disconnect switches, 30 to 1200 A
Introduction, agency information and product line summary
— IEC
Product line summary — UL
30 A, 60 A and 100 A compact
100 A, 200 A and 400 A standard
600 A, 800 A, 1000 A and 1200 A standard
UL 508 non-fused disconnect switches, 16 to 80 A
Introduction and agency information
Product line summary
16 A, 25 A, 40 A, 63 A and 80 A standard
Enclosed UL 98 and UL 508 disconnect switches
Section
page
2-3
4-5
6
Disconnect
switches
7-8
9
10
11-12
13-14
15-16
17-18
19-20
21-23
24-25
26
27
28-29
30-31
32-33
34
35
36-38
39
40-41
42-43
44-45
Bussmann series Compact Circuit
Protector (CCP) with CUBEFuse™
helps increase assembly SCCR in
a compact, finger-safe design
Introduction and agency information
Fused UL 98 enclosed disconnects, 30 to 800 A
Non-fused UL 98 enclosed disconnects, 30 to 1200 A
Non-fused UL 508 enclosed disconnects, 16 to 80 A
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017
Eaton.com/bussmannseries
11-1
11
— Disconnect switches
CCP Compact Circuit Protector fused disconnect
switches for ferrule fuses
With a small footprint, the CCP
fused disconnect switch offers
many advantages over other fused
disconnects. Available in 1-, 2- and
3-pole versions, this smaller size
CCP is offered in UL Class CC, UL
supplemental and IEC 10x38mm
fuses versions.
2011/65/EU
Terminals
•
•
Single/dual conductor box lug
Fork terminal suitable for line, load or accessory connection
Storage and operating temperature -20°C to 75°C*
* For fuse performance under or above 25ºC, consult fuse performance derating
charts in the Eaton publication titled Selecting Protective Devices (SPD), reorder
#3002.
Lockout/tagout provisions
•
Ratings
•
4mm shank lock or Brady pin-out device, part number 90850
See catalog number table
Mounting 35mm DIN-Rail
Local open fuse indication minimum voltage**
•
Agency information
•
Class CC fuse versions
•
•
UL 98 Listed, Guide WHTY, File E302370
cULus to CSA Standard 22.2 No. 4-04, Guide WHTY7 File
,
302370
UL 508 Listed, Guide NRNT, File E320230
cULus Certified 22.2 No. 14-05
IEC 60947-3 AC23A — IEC 60947-3 DC23A
90 Vac for AC versions, 12 Vdc for DC versions
** Open fuse indication requires an open fuse to be in the CCP and the switch in
the ON position.
•
UL midget and 10X38mm IEC fuse versions
•
•
•
Features
•
•
IP20 Finger-safe construction with 10 AWG or larger wire
Switch interlock prohibits removing the fuse under load
•
•
RoHS compliant
CE
Accessories
•
•
Auxiliary contacts
PLC wired remote fuse indication
1-, 2- and 3-pole, Class CC, UL midget and 10x38mm IEC
Max. Hp* (Vac)
Fuse
Amps class
Poles Volts
SCCR
120 240 480
1
0.5 —
—
30
CC
2
600 Vac
200 kA —
2
—
3
0.75 3
5
UL
30
240 Vac† 10 kA†
Midget
1
—
—
—
IEC
120
32*
400 Vac† kA†
10x38
UL
30
240 Vac† 10 kA†
Midget
2
—
—
—
IEC
120
32*
400 Vac†
10x38
kA†
UL
30
240 Vac† 10 kA†
Midget
3
—
—
—
IEC
32*
400 Vac† 120
10x38
kA†
30
30
32*
CC
CC
IEC
10x38
1
80 Vdc†
10 kA†
—
—
—
1
80 Vdc†
20 kA†
—
—
—
600
—
—
7
.5
—
Conductors
AWG size†††
Type
Agency info.
UL 98 Listed, cULus
22.2, No. 4-04
Catalog no.
CCP-1-30CC
CCP-2-30CC
CCP-3-30CC
CCP-1-30M
—
Single/dual; 8-6 Sol/Str
Single; 4 Sol/Str
Fork terminal††
75°C Cu
or higher
UL 508 Listed, cULus
22.2, No. 14-05
IEC 60947-3, AC-23A
CCP-2-30M
—
—
—
UL 98 Listed, CSA
22.2, No. 4-04
UL 508 Listed, cULus
22.2, No. 14-05
IEC 60947-3, DC-23A
CCP-3-30M
CCP-1-DCC
CCP-1-DCM
* 32 A Class aM, 25 A Class gG.
† SCCR May be lower, refer to installed fuse data sheets.
†† Fork terminal with a 4.3mm gap for a #8-32 stud, 30 A max, insulated flange,
wire size 12-10 AWG.
††† 18-10 AWG; 20 lb-in 2.3N•m, 8-4 AWG; 35 lb-in 4.0N•m
Available Bussmann series fuses
Fuse class
CC
gG/gL
aM
Type/description
LP-CC time-delay,
current limiting
FNQ-R time-delay
KTK-R fast-acting
C10G
C10M
Fuse class Type/description
Midget
FNM time-delay
FNQ time-delay
KTK fast-acting
BAF fast-acting
KLM fast-acting
Data sheet no. 1157
11-2
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017
Eaton.com/bussmannseries
Disconnect switches —
11
CCP Compact Circuit Protector fused disconnect
switches for ferrule fuses
Dimensions — mm (in)
35
(1.4)
52.5
(2.1)
45
(1.8)
17.5
(0.7)
49.2
(1.9)
92.7
(3.7)
Switch handle
Padlock provision
Fuse holder knob
Circuit
marking
area
Open fuse
indication light
Fork
terminal
Box lug
terminal
79.8
(3.1)
Auxiliary contacts
PLC indicator (Includes leads
with spade terminals)
CCP-_-30_ accessories
Description
Auxiliary contacts NO+NC for
switch status
PLC fuse monitor for open fuse
indication
Max. per CCP
1 per CCP (1-, 2- or 3-pole)
1 per CCP (1-, 2- or 3-pole)
Signal output
5 A/240 Vac
24 Vdc/ 10m A
Min. circuit
voltage
—
100 Vac
Agency information
UL 98 Recognized, cURus 22.2
No. 4-04, IEC 60947-5-1 AC15
UL 98 Recognized, cURus 22.2
No. 4-04
Catalog no.
CCP- AUX*
CCP-PLC-IND*
* Refer to data sheet no. 1157 for details.
Data sheet no. 1157
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017
Eaton.com/bussmannseries
11-3
Disconnect
switches
11
— Disconnect switches
CCP Compact Circuit Protector CUBEFuse
disconnect switches
With a small footprint, the CCP
fused disconnect switch offers
many advantages over other fused
disconnects. Available in 1-, 2- and
3-pole versions, the CUBEFuse
CCP is offered in a larger size
for the UL Class CF CUBEFuse
available in time-delay and fast-
acting versions in ratings from 1 to
100 amps.
2011/65/EU
Lockout/tagout provisions
•
1/4" shank lock
Mounting
•
35mm DIN-Rail
Local open fuse indication minimum voltage†
•
90 V
† Open fuse indication requires an open fuse to be in the CCP and the switch in
the ON position.
Features
Agency information
•
•
UL 98 Listed, Guide WHTY, File
E302370
cULus to CSA Standard 22.2 No.
4-04, Guide WHTY7 File 302370
,
RoHS compliant
CE
Ampacity rejecting disconnects will not accept CUBEFuse amp
ratings greater than switch rating
IP20 Finger-safe construction with 10 AWG (6mm
2
) wire or larger
Built-in switch interlock capability prohibits removing the fuse
under load
•
•
•
•
•
Accessories
•
•
•
Terminals
•
Auxiliary contacts
PLC wired remote fuse indication
CUBEFuse pullers (P/Ns: CFP-30, CFP-60, CFP-100)
Single/dual conductor box lug or spade terminal suitable for line,
load or accessory connection
Fuses
•
•
Time-delay CUBEFuse, see data sheet no. 9000
Fast-acting CUBEFuse, see data sheet no. 2147
Storage and operating temperature
•
-20ºC to 75ºC***
*** For fuse performance under or above 25ºC, consult fuse performance derating
charts in the Bussmann Division publication Selecting Protective Devices (SPD)
document no. 3002.
Amps
30
Poles
1
2
3
1
2
3
1
Volts
600 Vac
125 Vdc
600 Vac
600 Vac
125 Vdc
††
600 Vac
600 Vac
125 Vdc
†††
600 Vac
SCCR
(kA)
200
100
200
200
100
200
200
100
200
Max.
120
1.5
—
—
3
—
—
5
—
—
Hp (Vac)*
240
480
—
—
3
—
5
—
7
.5
7
.5
—
10
20
15
—
—
20
—
—
50
600
—
—
10
—
—
10
—
—
50
Conductor
AWG size**
Single/dual; 18-6 Sol/Str
Single; 4 Sol/Str
Fork terminal
†
Single; 8-10 Sol/Str, 8-1 Str
Dual; 6 Str
Fork terminal
†
Type
Agency information
Catalog no.
CCP-1-30CF
CCP-2-30CF
CCP-3-30CF
CCP-1-60CF
CCP-2-60CF
CCP-3-60CF
CCP-1-100CF
CCP-2-100CF
CCP-3-100CF
60
75°C Cu
or higher
UL 98 Listed
cULus 22.2, No. 4-04
100
2
3
* With time-delay Low-Peak CUBEFuse.
** 30-60 A — 18-10 AWG 20 lb-in, 8-6 AWG 35 lb-in, 4 AWG 35 lb-in, 70-100 A —
18-10 AWG Single 25 lb-in, 8-1 AWG Single 35 lb-in, 6 AWG Dual 45 lb-in.
† Fork terminal with a 4.3mm gap for a #8-32 stud, 30 A max, insulated flange,
wire size 12-10 AWG.
†† Up to 40 A max, >40 A is 24 Vdc.
††† Up to 80 A max, >80 A is 24 Vdc.
Data sheet no: 1157
11-4
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017
Eaton.com/bussmannseries
Disconnect switches —
11
CCP Compact Circuit Protector CUBEFuse
disconnect switches
Dimensions — mm (in)
25.1
(1.0)
50.4
(2.0)
75.7
(3.0)
25.15
(1.0)
50.5
(2.0)
79.5
(3.0)
60A CUBEFuse
89.1 (3.5)
30A CUBEFuse
83.3 (3.3)
75.1
(3.0)
91.2
(3.6)
60.3 (2.4)
56.6
(2.2)
67.7
(2.7)
100.0
(3.9)
30 and 60 amp
113.9
(4.5)
7.6
(0.3)
100 amp
147.1
(5.8)
Circuit
marking
area
Switch handle
Fuse holder
Padlock
provision
Fork
terminal
Open fuse
indication light
Box lug
terminal
Auxiliary contacts
PLC indicator (Includes leads
with spade terminals)
CCP-_-_CF accessories
Max. per
CCP
NO+NC for switch status
NO+NC for switch status
for open fuse indication
for open fuse indication
1 per CCP
(1-, 2-, 3-pole)
24 Vdc/ 10mA
5 A/ 240 Vac
Min.
circuit
voltage Agency information
UL 98 Recognized, cURus 22.2
No. 4-04, IEC 60947-5-1 AC15
—
UL 98 Recognized, CSA C22.2 No. 4
100 Vac
UL 98 Recognized, CSA C22.2 No. 4
CCP-PLC-100*
Description
Auxiliary contacts
up to 60 A
Auxiliary contacts
70 to 100 A
PLC fuse monitor
up to 60 A
PLC fuse monitor
70 to 100 A
Signal output
Catalog no.
CCP- AUX*
CCP- AUX-100*
UL 98 Recognized, cURus 22.2 No. 4-04 CCP-PLC-IND*
* Refer to data sheet no. 1157 for details.
Data sheet no: 1157
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017
Eaton.com/bussmannseries
11-5
Disconnect
switches
49.2
(1.9)
9.1
(0.4)
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
