1N3016B-1 – 1N3045B-1
Qualified Levels:
JAN, JANTX, and
JANTXV
Available on
commercial
versions
1 Watt Glass Case Zener Diodes
Qualified per MIL-PRF-19500/115
DESCRIPTION
This well established Zener diode series for the 1N3016B-1 through 1N3045B-1 JEDEC
registration in the glass DO-41 package provides a glass hermetic seal for 6.8 to 110 volts. It
is also well suited for high-reliability applications where it is available in JAN, JANTX, and
JANTXV military qualifications. Lower voltages are also available in the 1N3821 through
1N3828 series (3.3 V to 7.5 V) in the same package (see separate data sheet).
Important:
For the latest information, visit our website
http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
•
•
JEDEC registered 1N3016 through 1N3045 numbers.
Zener voltage range: 6.8 volts to 110 volts.
Hermetically sealed DO-41 glass package.
Metallurgically bonded.
Double plug construction.
Voltage tolerances of 5%, 2%, and 1% available.
JAN, JANTX, and JANTXV qualifications also available per MIL-PRF-19500/115.
(See
part nomenclature
for all available options.)
RoHS compliant versions available (commercial grade only).
DO-41 Package
Also available in:
DO-213AB package
(surface mount)
1N3016BUR-1 –
1N3045BUR-1
APPLICATIONS / BENEFITS
•
•
•
•
•
Regulates voltage over a broad operating current and temperature range.
Wide selection from 6.8 to 110 volts.
Low reverse (leakage) currents.
Non-sensitive to ESD.
Inherently radiation hard as described in Microsemi “MicroNote
050”.
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
(1)
Thermal Resistance Junction-to-Lead
(2)
DC Power Dissipation
Forward Voltage @ 200 mA
Solder Temperature @ 10 s
Symbol
T
J
and T
STG
R
ӨJL
P
D
V
F
T
SP
Value
-55 to +175
80
1.0
1.2
260
Unit
ºC
ºC/W
W
V
o
C
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Notes:
1. At L = 0.375 inches (10 mm) from body.
2. At T
L
< +95
o
C 3/8” (10 mm) from body or 1.0 watts at T
L
< +65
o
C when mounted on FR4 PC board as
described for thermal resistance above (also see
Figure 1).
(Derate power to 0 at T
L
= +175 °C).
T4-LDS-0285, Rev. 1 (4/22/13)
©2013 Microsemi Corporation
Page 1 of 5
1N3016B-1 – 1N3045B-1
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Hermetically sealed voidless hard glass with tungsten slugs.
TERMINALS: Tin/lead or RoHS compliant matte/tin (commercial grade only) over copper.
MARKING: Body coated in blue with part number.
POLARITY: Cathode indicated by band.
TAPE & REEL option: Standard per EIA-296. Consult factory for quantities.
WEIGHT: 340 milligrams.
See
Package Dimensions
on last page.
PART NOMENCLATURE
JAN
Reliability Level
JAN = JAN level
JANTX = JANTX level
JANTXV = JANTXV level
Blank = Commercial
JEDEC type number
(See
Electrical Characteristics
table)
Zener Voltage Tolerance
B = 5%
C = 2%
D = 1%
1N3016
B
-1
e3
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Metallurgically Bonded DO-41
Symbol
I
R
I
Z
, I
ZT
, I
ZK
I
ZM
V
F
V
R
V
Z
Z
ZT
or Z
ZK
SYMBOLS & DEFINITIONS
Definition
Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
Regulator Current: The dc regulator current (I
Z
), at a specified test point (I
ZT
), near breakdown knee (I
ZK
).
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Reverse Voltage: The reverse voltage dc value, no alternating component.
Zener Voltage: The Zener voltage the device will exhibit at a specified current (I
Z
) in its breakdown region.
Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
specified rms current modulation (typically 10% of I
ZT
or I
ZK
) and superimposed on I
ZT
or I
ZK
respectively.
T4-LDS-0285, Rev. 1 (4/22/13)
©2013 Microsemi Corporation
Page 2 of 5
1N3016B-1 – 1N3045B-1
*ELECTRICAL CHARACTERISTICS
@ 25°C
NOMINAL
ZENER
VOLTAGE
V
Z
@ I
ZT
(Note 1)
Volts
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
ZENER
TEST
CURRENT
I
ZT
mA
37
34
31
28
25
23
21
19
17
15.5
14
12.5
11.5
10.5
9.5
8.5
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.7
3.3
3.0
2.8
2.5
2.3
MAXIMUM ZENER IMPEDANCE
(Note 3)
MAXIMUM
ZENER
CURRENT
I
ZM
(Note 3)
mA
140
125
115
105
95
85
80
74
63
60
52
47
43
40
34
31
28
26
23
21
19
18
17
15
14
12
11
10
9.0
8.3
MAXIMUM
REVERSE
LEAKAGE
CURRENT†
I
R
@ V
R
µA
Volts
150
5.2
100
5.7
50
6.2
25
6.9
25
7.6
10
8.4
10
9.1
10
9.9
10
11.4
10
12.2
10
13.7
10
15.2
10
16.7
10
18.2
10
20.6
10
22.8
10
25.1
10
27.4
10
29.7
10
32.7
10
35.8
10
38.8
10
42.6
10
47.1
10
51.7
10
56.0
10
62.2
10
69.2
10
76.0
10
83.6
MAXIMUM
TEMP. COEFF.
OF ZENER
VOLTAGE
α
VZ
%/
o
C
0.061
0.065
0.070
0.073
0.076
0.078
0.081
0.085
0.088
0.089
0.091
0.092
0.093
0.094
0.096
0.098
0.099
0.100
0.101
0.102
0.102
0.103
0.103
0.104
0.104
0.105
0.106
0.108
0.11
0.11
JEDEC
TYPE
NUMBER
1N3016B-1
1N3017B-1
1N3018B-1
1N3019B-1
1N3020B-1
1N3021B-1
1N3022B-1
1N3023B-1
1N3024B-1
1N3025B-1
1N3026B-1
1N3027B-1
1N3028B-1
1N3029B-1
1N3030B-1
1N3031B-1
1N3032B-1
1N3033B-1
1N3034B-1
1N3035B-1
1N3036B-1
1N3037B-1
1N3038B-1
1N3039B-1
1N3040B-1
1N3041B-1
1N3042B-1
1N3043B-1
1N3044B-1
1N3045B-1
Z
ZT
@ I
ZT
Ohms
3.5
4.0
4.5
6
7
8
9
10
14
16
20
22
23
25
35
40
45
50
60
70
80
95
110
125
150
175
200
250
350
450
Z
ZK
@ I
ZK
Ohms
mA
700
1.0
700
.5
700
.5
700
.5
700
.25
700
.25
700
.25
700
.25
700
.25
700
.25
750
.25
750
.25
750
.25
750
.25
750
.25
1000
.25
1000
.25
1000
.25
1000
.25
1500
.25
1500
.25
1500
.25
2000
.25
2000
.25
2000
.25
2000
.25
3000
.25
3000
.25
3000
.25
4000
.25
*JEDEC Registered Data.
NOTES:
1.
2.
†Not JEDEC Data.
Zener Voltage (
V
Z
) is measured with junction in thermal equilibrium with still air at a temperature of 25
o
C. The test currents (I
ZT
) at
nominal voltages provide a constant 0.25 watts.
The Zener impedance is derived when a 60 cycle ac current having an rms value equal to 10% of the dc Zener current (I
ZT
or
I
ZK
) is superimposed on I
ZT
or I
ZK
. Zener impedance is measured at 2 points to ensure a sharp knee on the breakdown curve
and to eliminate unstable units. See
MicroNote 202
for variation in dynamic impedance with different Zener currents.
These values of I
ZM
may often be exceeded in the case of individual diodes. The values shown are calculated for a unit at the high
voltage end of its tolerance range. Allowance has also been made for the rise in Zener voltage above V
ZT
that results from Zener
impedance and the increase in junction temperature as a unit approaches thermal equilibrium at a dissipation of 1 watt. The I
ZM
values shown for +/- 5% tolerance units may be used with little error for +/-10% tolerance units, but should be reduced by 7% to
include a +/- 20% tolerance unit near the high voltage end of its tolerance range.
3.
T4-LDS-0285, Rev. 1 (4/22/13)
©2013 Microsemi Corporation
Page 3 of 5
1N3016B-1 – 1N3045B-1
GRAPHS
DC Operation Maximum Rating (W)
T
L
(ºC) (Leads 3/8”)
FIGURE 1
Temperature-Power Derating Curve
T4-LDS-0285, Rev. 1 (4/22/13)
©2013 Microsemi Corporation
Page 4 of 5
1N3016B-1 – 1N3045B-1
PACKAGE DIMENSIONS
NOTES:
1. Dimensions are in inches. Millimeters are given for general
information only.
2. Package contour optional with BD and length BL. Heat slugs, if any,
shall be included within this cylinder length but shall not be subject to
minimum limit of BD.
3. Within this zone lead, diameter may vary to allow for lead finishes
and irregularities other than heat slugs.
4. In accordance with ASME Y14.5M, diameters are equivalent to
Φx
symbology.
Ltr
BD
BL
LD
LL
LU
DIMENSIONS
INCH
MILLIMETERS
Min
Max
Min
Max
0.080 0.107
2.03
2.72
0.160 0.205
4.06
5.21
0.028 0.034
0.71
0.86
1.000
-
25.40
-
-
0.050
-
1.27
Notes
2
2
3
T4-LDS-0285, Rev. 1 (4/22/13)
©2013 Microsemi Corporation
Page 5 of 5
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
