1000 - 2500 Watts
VS Series
VS1-B2-H522-00
1100W total
Special Features
• Power factor correction
• IEC 555-2 harmonic distortion compliance
• CISPR 22, EN55022 Level B
conducted / radiated EMI
• EN61000 immunity standards
• European CE Mark
• Current share on all outputs
• Remote sense on all outputs
• Overload protection on all outputs
• Voltage adjustment on all outputs
• Margining on all outputs
• AC-OK-signal (logics “1” or “0”)
• Global DC OK (logics “1” or “0”)
• DC-OK signal and status indicator LED-on all outputs
• Global and individual module inhibits/enable
• 3 year warranty
• 2500 W with 3-phase input
VS3-D2-C2-20
1200W total
VS6-L2-00
1500W total
Environmental
Operating temperature: -10°C to 50°C
(derate each output linearly to 60% at 70°C)
40°C max. for reverse air (option #1)
Shock/Vibration: Mil-Hdbk 810E
Humidity: 95% non-condensing
VS8-L9-D9-20
2500W total (case limit)
Storage temperature: -55°C to +85°C
Temperature coefficient: 0.02% per °C
Cooling: Internal DC fan 24V
Safety
VS4/9
2000 - 2500 W
UL
CSA
VDE
CB
CE
UL60950-1
CSA C22.2 No. 60950-1-03
EN60950
Certificate and report
Mark
E133211
1
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
VS Series
Electrical Specs
Input
Fuse rating
Input voltage
600 V / 25 A (internal)1Ø
250 V / 20 A (internal)3Ø
85-264 VAC 1Ø
VS1, VS3 & VS4
(See operating curve)
Output
Adjustment range
Margining
Line/load reg
Ripple
±10% minimum
±4-6% nominal
0.2% or 5 mV max.
RMS: 0.1% or 10 mV
P-P: 1.0% or 50 mV
Bandwidth limited to 20 MHz
2% or 100 mV with 25% load step
(any output)
To within 1% in <300 µsec
2-5 V 122% to 134% of output voltage;
12-48 V 110% to 120%; recycle AC
Main: 105% to 120% of rated current
Auxiliaries:105% to 140%
Protected for continuous short circuit,
recovery automatic
100% of rated output current
Each module thermally protected.
Input module: auto recovery. Output
modules; recycle AC.
Up to 0.5 V - total drop
Current share to 2% of total rated
current
200 KHz
(900-1500 W module, 400 KHz)
-2% to -6% of nominal
>1 Megohm
180-264 VAC 3Ø
VS6, VS8 & VS9
Frequency
Inrush current
Efficiency
Power factor
Turn-on time
EMI-filter
Leakage current
Holdover storage
AC-OK warning time
Loss of phase
47 to 440 Hz
40 A peak max.
75% - 82%
0.99 typical
(0.9 on VS6, VS8 & VS9)
AC / 1 sec;
Inhibit / 100 ms max.
CISPR 22, EN55022 Level B
conducted/radiated
2 mA max. at 240 VAC
20 ms min. / 40 ms typical
independent of VAC
>5 ms (power fail)
On VS6, VS8 & VS9, unit will
continue to operate with loss
of phase
Remote sense
Single wire parallel
Switching frequency
DC OK
Output/Output isolation
Dynamic response
Recovery time
Overvoltage protection
Overload protection
Short circuit protection
Reverse voltage
protection
Thermal protection
Input Operating Curve
2200
2000
MAXIMUM OUTPUT POWER (W)
1800
1600
1400
1200
1000
800
600
400
200
0
80
100
120
140
160
180
200
220
240
INPUT AC VOLTAGE (VAC) @ 50/60Hz
Single Phase
www.astecpower.com
69-825-410 Rev C
12.01.04
260
2
Common Examples
and Specifications
Case size
1
= 5 inch, 2 slot,
3
= 8 inch, 4 slot,
4
= 11 inch, 6 slot,
6
= 5 inch, 2 slot,
8
= 8 inch, 4 slot,
9
= 11 inch, 6 slot,
1500 W max 1Ø
2000 W max 1Ø
2000 W max 1Ø
1500 W max 3Ø
2500 W max 3Ø
2500 W max 3Ø
(Same for Each Slot)
Option Codes
0
= no options
1
= rear air exhaust (40°C max.)
3
= set unit for global enable
5 = options 1 & 3
USE ONLY-FOR
MODIFIED STANDARD,
CONSULT-FACTORY
Indicates CE compliance
Output Module Code
A
= 300 W single 1 slot
B
= 600 W single 1 slot
C
= 900 W single 2 slots
D
= 1200 W single 2 slots
E
= 250 W dual 1 slot
F
= 250 W triple 1 slot
G
= 500 W dual 1 slot
H
= 500 W triple 1 slot
K
= 750 W single 1 slot
L
= 1500 W single 2 slot
Output Voltage Code
0
= 2V
1
= 3.3 V
2
= 5V
3
= 12 V
4
= 15 V
5
= 24 V
6
= 28 V
7
= 36 V
8
= special voltage
(consult factory)
9
= 48 V
Configuration Rules
1.
Omit digits that do not apply.
2. a.
Specify modules from lowest number
of outputs to highest.
b.
If number of outputs are equal, specify
from highest to lowest power increments.
c.
If power increments are equal, specify
from highest to lowest current.
3.
All model configurations created using
this selection guide represent standard
products with standard availability and
lead times.
4.
If slots are left empty, a blank panel will
be automatically installed.
Parallel Code
VS1 and VS6
available slots
J1
SLOT 2
SLOT 1
VS3 and VS8
available slots
N
SLOT 4
SLOT 3
SLOT 2
SLOT 1
VS4 and VS9
available slots
N
J1
SLOT 3
SLOT 2
SLOT 6
SLOT 5
SLOT 4
SLOT 1
Parallel Codes
0
= no parallel
1
=1&2
2
=2&3
3
=3&4
4
=1&2 &3
5
=2&3 &4
6
=1&2+3&4
7
=1&2&3&4
8
=3&4+5&6
J1
Example
(more on next page):
VS 1 - K 2 - G 3 3 - 0 0 - CE
No options
Slot 1
1:
5V @ 150A
Slot 2
2:
12V @ 21A
3:
12V @ 20A
No paralleling
5 inch case
(2 slots available)
Output Current
Output Voltage
Identification
Output
Voltage
Code
0
1
2
3
4
5
6
7
9
Output
Voltage
2V
3.3 V
5V
12 V
15 V
24 V
28 V
36 V
48 V
9
=1&2+3&4+5&6
Module Identification
A
(1 slot)
300 W
Single
60 A
60 A
60 A
25 A
20 A
12.5 A
10.7 A
8.3 A
6.3 A
B
(1 slot)
600 W
Single
120 A
120 A
120 A
50 A
40 A
25 A
21.4 A
16.6 A
12.5 A
C
(2 slots)
900 W
Single
180 A
180 A
180 A
75 A
60 A
37.5 A
32.1 A
24.9 A
18.75 A
D
(2 slots)
1200 W
Single
240 A
240 A
240 A
100 A
80 A
50 A
42.8 A
33.2 A
25 A
E, F
(1 slot)
250 W Multi
Main Output
25 A
25 A
25 A
10.5 A
8.3 A
5.3 A
4.5 A
N/A
N/A
G, H
(1 slot)
500 W Multi
Main Output
50 A
50 A
50 A
21 A
16.6 A
10.5 A
9A
N/A
N/A
K (1 slot)
750 W
Single
150 A
150 A
150 A
62.5 A
50 A
31.2 A
26.7 A
20.8 A
15.6 A
L (2 slots)
1500 W
Single
300 A
300 A
300 A
125 A
100 A
62.4 A
53.4 A
41.6 A
31.2 A
Note:
Increments of current not shown can be achieved by paralleling modules (add currents of each module selected).
Auxiliary Output Table: Output(s) 2 and/or 3 of Module
Voltage
Identification
Output
Voltage
Code
0
1
2
3
4
5
6
Output
Voltage
2V
3.3 V
5V
12 V
15 V
24 V
28 V
Module Identification
E
250 W Dual
Aux. Output
10 A
10 A
10 A
10 A
10 A
5A
5A
F
250 W Triple
Aux. Output
5A
5A
5A
5A
5A
2.5 A
2.5 A
G
500 W Dual
Aux. Output
20 A
20 A
20 A
20 A
20 A
10 A
10 A
H
500 W Triple
Aux. Output
10 A
10 A
10 A
10 A
10 A
5A
5A
3
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
EXAMPLES
Examples of Model Numbers - SINGLE OUTPUTS
Total
Power
600 W
750 W
900 W
1200 W
1200 W
1500 W
2000 W
2500 W
Volts /
Amps
5 V / 120 A
12 V / 62.5 A
5 V / 180 A
5 V / 240 A
2 V / 600 A
15 V / 100 A
5 V / 400 A
48 V / 52 A
Size
(H x W x L)
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 8 x 11
5 x 5 x 11
5 x 8 x 11
5 x 8 x 11
Model
Number
VS1-B2-00
VS1-K3-00
VS1-C2-00
VS1-D2-00
VS3-L0-L0-20
VS1-L4-00
VS3-D2-C2-20*
VS8-L9-D9-20 **
Other Voltages
Available
2V
3.3 V
5V
12 V
15 V
24 V
28 V
36 V
Special
48 V
VS Series
Voltage
ID Code
0
1
2
3
4
5
6
7
8 (consult factory)
9
* D2 module derated to 1100 W (2000 W max.)
**D9 module derated to 1000 W (2500 W max )
Examples of Model Numbers - MULTIPLE OUTPUTS
Total
Power
500 W
750 W
800 W
800 W
800 W
800 W
990 W
1000 W
1000 W
1100 W
1100 W
1100 W
1100 W
1100 W
1400 W
1400 W
1440 W
1600 W
1680 W
1700 W
1900 W
2000 W
2000 W
2500 W
Output
1
5 / 50
5 / 50
5 / 60
5 / 60
5 / 60
5 / 60
5 / 150
5 / 50
5 / 50
5 / 120
5 / 120
5 / 170
5 / 120
5 / 120
5 / 180
5 / 180
5 / 240
5 / 170
5 / 240
5 / 240
5 / 180
5 / 300
5 / 240
5 / 300
Output
2
12 / 10
12 / 10
12 / 21
12 / 21
15 / 16.6
15 / 16.6
2 / 120
12 / 10
12 / 10
12 / 21
12 / 21
12 / 10
15 / 16.6
15 / 16.6
12 / 21
12 / 21
2 / 120
12 / 20
2 / 240
12 / 21
12 / 21
12 / 21
12 / 21
3.3 / 120
Output
3
12 / 10
12 / 10
12 / 10
12 / 10
15 / 10
15 / 10
12 / 10
12 / 10
12 / 20
12 / 10
12 / 10
15 / 10
15 / 10
12 / 20
12 / 10
12 / 21
12 / 20
12 / 20
12 / 10
12 / 20
12 / 21
Output
4
15 / 8.3
5 / 10
24 / 5
5 / 10
24 / 5
15 / 16.6
15 / 16.6
5 / 10
5 / 10
24 / 5
5 / 10
5 / 20
5 / 50
5 / 10
5 / 60
12 / 10
15 / 10
15 / 10
15 / 10
24 / 5
24 / 5
Output
5
15 / 5
Output
6
5/5
Size
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 5 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
5 x 8 x 11
Model Number
VS1-H233-00
VS1-H233-F442-00
VS1-A2-H332-00
VS1-A2-H335-00
VS1-A2-H442-00
VS1-A2-H445-00
VS1-K2-B0-00
VS1-H233-H445-00
VS1-H233-H425-00
VS1-B2-G33-00
VS1-B2-H332-00
VS1-B2-H233-10
VS1-B2-H442-00
VS1-B2-H445-00
VS3-C2-G33-00
VS3-C2-H332-00
VS3-D2-B0-00
VS3-B2-G23-G32-10
VS3-D2-D0-00
VS3-D2-G33-00
VS3-C2-G33-H245-00
VS3-L2-H332-00
VS3-D2-G33-H245-00
VS8-L2-B1-H334-00
15 / 10
5 / 10
24 / 5
24 / 5
Pin Assignments
PFC
J1 CONTROL CONNECTOR
Pin No.
Function
J1-1
AC OK Logic 1
J1-2
AC OK Logic 0
J1-3
Global DC OK/Conv Run Logic 1
J1-4
Global DC OK/Conv Run Logic 0
J1-5
Global DC OK/Conv Run/AC OK
Return
J1-6
Global Inhibit Logic 0*/ENA Logic '0'
J1-7
Global Inhibit Logic 1*/ENA Logic '1'
J1-8
Global Inhibit Return*ENA RTN
J1-9
Global Isolated Inhibit
J1-10
Global Isolated Inhibit Return
* Changes to Enable with Option Code 3
Multiple Output
J1 CONTROL CONNECTOR
Pin No.
Function
J1-1
V1 +Remote Sense
J1-2
V1 Remote Margin / V. Program
J1-3
V1 Remote Margin Hi
J1-4
V1 -Remote Sense / Margin Lo
J1-5
V1 DC OK / Conv Run Logic 1
J1-6*
V1 Isolated Inhibit
J1-7
V1 DC OK / Conv Run / ISO Inh.
Return
J1-8
V1 Single Wire Parallel
J1-9
V2 Single Wire Parallel
J1-10
V3 Single Wire Parallel
* Inhibits off all the outputs within that module.
J2 CONTROL CONNECTOR
Pin No.
Function
J2-1
V2 +Remote Sense
J2-2
V2 Remote Margin / V. Program
J2-3
V2 Remote Margin Hi
J2-4
V2 -Remote Sense / Margin Lo
J2-5
V2 DC OK /Logic 1
J2-6
V3 +Remote Sense
J2-7
V3 Remote Margin / V. Program
J2-8
V3 Remote Margin Hi
J2-9
V3 -Remote Sense
J2-10
V3 DC Good /Logic 1
Single Output
J1 CONTROL CONNECTOR
Pin No.
Function
J1-1
+Remote Sense
J1-2
Remote Margin / V. Program
J1-3
Remote Margin Hi
J1-4
-Remote Sense / Margin Lo
J1-5
DC OK / Conv Run Logic 1
J1-6
Isolated Inhibit
J1-7
DC OK / Conv Run / ISO Inh.
Return
J1-8
Single Wire Parallel
J1-9
Spare Pin
J1-10
Spare Pin
Notes:
Electrical Characteristics
1.
2.
3.
DC OK minus 2 to 6% of nominal output voltage
(tracking).
Inhibit & Enable are both TTL compatible.
ISOLATED requires 2 mA source, typical.
DC OK/Converter Run denotes output voltage
is present and converters are running
(Or'ed signal configuration).
PFC LED: Red = Bulk DC bus voltage low;
Green = Bulk DC OK.
Output LED: Red = Indicated output not
operating within tolerance;
Green = Indicated output operating within
tolerance.
The 5 x 5 x 11 (VS1/6) case is power limited to
1500W max. See operating curve.
The 5 x 8 x 11 case and 5 x 11 x 11 case (VS3/4)
are power limited to 2000W max. The VS8/9
cases are power limited to 2500W max.
Specifications subject to change without
notice.
Warranty: 3 yrs
4.
5.
6.
7.
8.
9.
www.astecpower.com
69-825-410 Rev C
12.01.04
4
Drawings
VS1 & VS6 • 1000-1500 WATTS
5-inch Case Size (5” x 5” x 11”)
VS1
Input
Module
AC High
Neutral
Ground
5.00 ± 0.05
STD AIR FLOW
.94
MAX
23.89)
11.00 ± .05
(279.31 ± 1.27)
1.2
8-32 UNC-2B
Threaded Insert, 4 Places
Like Pattern Opposite Side
Max penetration: 0.150 (3.81 )
SLOT 2
SLOT 1
5.00
Max
(127.03)
Side
4.000 ± .020
(101.60 ± .50)
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .05
(88.65 ± 1.27)
.500 ± .050
(12.70 ± 1.27)
AC Main Input
6.750 ± .020
(171.45 ± .50)
.27 ± .05
(6.86 ± 1.27)
.750 ± .050
(19.05 ± 1.27)
Bottom
8-32 UNC-2B
Threaded Insert,
4 Places
Max penetration:
0.150 (3.81)
VS6
Input
Module
AC Phase A
AC Phase B
AC Phase C
5.00 ± 0.05
SLOT 2
SLOT 1
6.750 ± .020
(171.45 ± .50)
AC Ground
N
5.00
Max
(127.03)
Back
J1
2.04 ± .05
(51.82 ± 1.27)
3.49 ± .05
(88.65 ± 1.27)
.750 ± .050
(19.05 ± 1.27)
4.000 ± .020
(101.60 ± .50)
.500 ± .050
(12.70 ± 1.27)
NOTES (ALL MODELS)
1.
Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). For VS1, VS3 & VS4 additional GND CONN added for VS6, VS8 & VS9.
Max torque: 10 in-lbs (1.1 N-m).
2.
Control connectors: (J1 and J2) 10 position Molex 90130-3210 housing, gold plated contacts. Mates with Molex 90142-0010 housing with
90119-2110 crimp contacts (Molex C - Grid III Series). Connector kit includes mating connector and 10 pins, Astec part #70-841-004.
3.
Output terminals (A-300 W) (B-600 W) & (K-750 W) single modules: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
4.
Output terminals (E/F-250 W) & (G/H-500 W) dual/triple modules: Primary: two (2) 10-32 UNF HEX HD BOLTS. Max. torque: 25 in-lbs (2.78 N-m).
Secondary: barrier strip two (2) 6-32 UNC screws (0.375” centers) per output. Max torque: 10 in-lbs (1.1 N-m).
5.
Output terminals (C-900 W) (D-1200 W) & (L-1500 W) single modules: four 5/16-18 x 5/8" hex head cap screws. Max. torque: 120 in-lbs
(13.35 N-m). Captive lock washer provided.
6.
Chassis material: aluminum with chemical film coating.
7.
Adjustment access: voltage, power fail, and overcurrent from front panel.
8.
Bar code: code 39 extended.
9.
Mounting for 5-inch & 8-inch case: four(4) 8-32 clinch nuts on three (3) surfaces.
Mounting for 11-inch case:
four (4) 8-32 clinch nuts on two (2) side surfaces &
six (6) 8-32 clinch nuts on bottom surface.
Max. penetration 0.150 inch (3.81). Max. torque: 15 in-lbs (1.67 N-m).
10.
Additional support is recommended when unit is mounted in a suspended configuration.
Mounting clinch nuts are not designed to support the weight of the unit.
11.
Fans: 5-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA.
8-inch case, (1) 4.5" dia, 112 CFM (no load), 49 dBA; (2) 2.25” dia, 23 CFM (no load), 38 dBA.
11-inch case, (2) 4.5" dia, 112 CFM (no load), 49dBA
12.
All dimensions are in inches (mm).
13. Specifications subject to change without notice.
5
Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662
69-825-410 Rev C
12.01.04
综合技术交流
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
