INSTRUCTION MANUAL
Español.............31
Français ...........61
Deutsch ............91
560XL • 567XL • 568XL
Fiber Optic Power Meter
570XL • 573XL • 577XL • 578XL
650/850/1300 nm LED Source
1310/1550 nm Laser Source
Read
and
understand
all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
52040482 REV 8
© 2014 Greenlee Textron Inc.
3/14
580XL
Table of Contents
Description ............................................................................................... 3
Safety ....................................................................................................... 3
Purpose of This Manual............................................................................. 3
Important Safety Information................................................................. 4–6
Introduction .......................................................................................... 7–8
Model Designations ............................................................................ 7
Unpacking and Inspection................................................................... 8
Specifications ..................................................................................... 9–12
XL Series LED Sources ................................................................. 9–10
580XL Laser Source ......................................................................... 11
XL Series Optical Power Meters ........................................................ 12
General Information .......................................................................... 13–16
Battery Installation or Replacement ............................................ 13–14
Auto-Shutoff Feature ........................................................................ 15
Snap-On Connector (SOC) Interface .................................................. 16
Operation.......................................................................................... 17–20
570XL, 573XL, 577XL, and 578XL LED Sources ................................ 17
580XL Series Laser Sources ............................................................. 18
XL Series Power Meters.............................................................. 19–20
Setting the Source Modulation Frequency ......................................... 20
Applications ...................................................................................... 21–29
One Test Jumper Method: Connector Loss ................................. 21–23
Two Test Jumper Method: Link Loss .......................................... 24–26
Dual-Wavelength SM Loss Measurements .................................. 27–29
Warranty ................................................................................................. 30
KEEP THIS MANUAL
2
560XL • 567XL • 568XL • 570XL • 573XL • 577XL • 578XL • 580XL
Description
The Greenlee Communications XL fiberTOOLS™ instruments are handheld
fiber optic tools designed to measure optical power levels and link loss on
multi-mode and single-mode fiber optic cabling networks.
• The 560XL power meter measures optical power at 850 nm, 1300 nm,
1310 nm, and 1550 nm and can store reference power levels. The
snap-on connector (SOC) interface is available for all common connectors.
• The 567XL power meter measures optical power at 635 nm, 780 nm, and
850 nm and can store reference power levels. The snap-on connector
(SOC) interface is available for all common connectors.
• The 568XL power meter measures optical power at 980 nm, 1310 nm,
and 1550 nm and can store reference power levels. The snap-on
connector (SOC) interface is available for all common connectors.
• The 570XL LED source provides a light source to measure insertion loss
on multi-mode fiber optic cabling. It is configured for FC, SC, and ST
connectors.
• The 573XL LED source provides a light source to measure insertion loss
on plastic optical fiber. The snap-on connector (SOC) interface is available
for all common connectors.
• The 577XL and 578XL LED sources provide a light source to measure
insertion loss on multi-mode optical fiber. The universal connector
interface (UCI) is available for all common connectors. M90 or AS100
standards are met.
• The 580XL laser source provides a light source to measure insertion loss
on single-mode fiber optic cabling. It is configured for FC, SC, and ST
connectors.
Safety
Safety is essential in the use and maintenance of Greenlee tools and
equipment. This instruction manual and any markings on the tool provide
information for avoiding hazards and unsafe practices related to the use of
this tool. Observe all of the safety information provided.
Purpose of This Manual
This instruction manual is intended to familiarize all personnel with the safe
operation and maintenance procedures for the Greenlee Communications
560XL, 567XL, 568XL, 570XL, 573XL, 577XL, and 580XL fiberTOOLS
instruments.
Keep this manual available to all personnel. Replacement manuals are
available upon request at no charge at www.greenlee.com.
3
Important Safety Information
SAFETY ALERT SYMBOL
This symbol is used to call your attention to hazards or unsafe
practices which could result in an injury or property damage. The
signal word, defined below, indicates the severity of the hazard. The
message after the signal word provides information for preventing or
avoiding the hazard.
Immediate hazards which, if not avoided, WILL result in severe injury
or death.
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury
or property damage.
Read
and
understand
this material before operating
or servicing this equipment. Failure to understand
how to safely operate this tool could result in an
accident causing serious injury or death.
Electric shock hazard:
Contact with live circuits could result in severe injury
or death.
4
560XL • 567XL • 568XL • 570XL • 573XL • 577XL • 578XL • 580XL
Important Safety Information
The 580XL instrument is a laser device conforming to the requirements of
CDRH, CFR 1040, Subchapter J. While there is no potential for eye damage
due to unaided direct exposure, users should always avoid looking directly
into the output port. The use of optical viewing instruments, such as micro-
scopes, magnifiers, etc., should always be avoided. The use of such devices
around active fibers can focus an intense beam of light energy onto the
retina of the eye, which can result in permanent damage.
Laser hazard:
• When performing measurements on fiber optic systems, avoid eye
exposure to any open-ended fibers, optical connectors, optical inter-
faces, or other sources because they may be connected to active laser
transmitters.
• Do not look into the optical port when a source is turned on.
• Avoid looking at the free end of a test fiber, i.e., the end not connected
to the instrument. If possible, direct the free end toward a non-reflec-
tive surface.
Failure to observe these precautions may result in injury.
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
