MDDDT5540N: 产品描述SERVO DRIVER 50A 240V LOAD; 产品类别热门应用机电/工控/自动化; 文件大小7MB，共364页; 制造商Panasonic(松下); 官网地址http://www.panasonic.co.jp/semicon/e-index.html; 标准

下载文档详细参数全文预览

MDDDT5540N概述

SERVO DRIVER 50A 240V LOAD

MDDDT5540N规格参数

参数名称	属性值
类型	模块
电机类型	伺服
控制 / 驱动类型	伺服 AC
电机数	1
电压 - 负载	240 V
电流 - 输出	50A
瓦数 - 负载	1.5kW
电压 - 电源	200 ~ 240VAC
接口	RS-232，RS-485
安装类型	底座安装
工作温度	0°C ~ 55°C
配套使用产品/相关产品	Minas A4 系列
重量	3.9 磅（1.8kg）

文档预览

下载PDF文档

全文
预览

Instruction Manual

AC Servo Motor and Driver

MINAS A4 Series

•Thank you for buying and using Panasonic AC Servo Motor and Driver, MINAS A4 Series.

•Read through this Instruction Manual for proper use, especially read "Precautions for

Safety" ( P.8 to 11) without fail for safety purpose.

•Keep this Manual at an easily accessible place so as to be referred anytime as necessary.

・This

product is for industrial equipment. Don't use this product at general household.

Content

[Before Using the Products]

page

Safety Precautions .................................................................... 8

Maintenance and Inspection ................................................... 12

Introduction.............................................................................. 14

Outline .......................................................................................................................................................... 14

On Opening the Package ............................................................................................................................. 14

Check of the Driver Model ............................................................................................................................ 14

Check of the Motor Model ............................................................................................................................ 15

Check of the Combination of the Driver and the Motor ................................................................................ 16

Parts Description ..................................................................... 18

Driver ............................................................................................................................................................ 18

Motor ............................................................................................................................................................. 20

Console ......................................................................................................................................................... 21

Installation................................................................................ 22

Driver ............................................................................................................................................................ 22

Motor ............................................................................................................................................................. 24

Console ......................................................................................................................................................... 26

[Preparation]

page

System Configuration and Wiring .......................................... 28

Overall Wiring (Connecting Example of C-frame, 3-phase) ......................................................................... 28

Overall Wiring (Connecting Example of E-frame) ........................................................................................ 30

Driver and List of Peripheral Equipments ..................................................................................................... 32

Wiring of the Main Circuit (A to D-frame) ..................................................................................................... 34

Wiring of the Main Circuit (E and F-frame)................................................................................................... 35

Wiring to the Connector, CN X6 (Connection to Encoder) ........................................................................... 38

Wiring to the Connector, CN X3 and 4 (Connection to PC, Host Controller or Console) ............................ 40

Wiring to the Connector, CN X5 (Connection to Host Controller) ................................................................ 41

Timing Chart ............................................................................ 42

Built-in Holding Brake ............................................................. 46

Dynamic Brake......................................................................... 48

Caution on Homing.................................................................. 50

Setup of Parameter and Mode ................................................ 51

Outline of Parameter .................................................................................................................................... 51

How to Set .................................................................................................................................................... 51

How to Connect ............................................................................................................................................ 51

Composition and List of Parameters ............................................................................................................ 52

Setup of Torque Limit .................................................................................................................................... 57

How to Use the Front Panel and Console .............................. 58

Setup with the Front Panel ........................................................................................................................... 58

Setup with the Console ................................................................................................................................ 58

Initial Status of the Front Panel Display (7 Segment LED) .......................................................................... 59

Initial Status of the Console Display (7 Segment LED)................................................................................ 59

Structure of Each Mode ................................................................................................................................ 60

Monitor Mode ................................................................................................................................................ 63

Parameter Setup Mode ................................................................................................................................ 69

Before Using

the Products

EEPROM Writing Mode ................................................................................................................................ 70

Auto-Gain Tuning Mode ............................................................................................................................... 71

Auxiliary Function Mode ............................................................................................................................... 73

Copying Function (Console Only) ................................................................................................................ 79

[Connection and Setup of Position Control Mode]

page

Preparation

Connection and Setup of

Position Control Mode

Connection and Setup of

Velocity Control Mode

Connection and Setup of

Torque Control Mode

Full-Closed

Control Mode

Control Block Diagram of Position Control Mode ................. 82

Wiring to the Connector, CN X5 .............................................. 83

Wiring Example to the Connector, CN X5 .................................................................................................... 83

Interface Circuit ............................................................................................................................................ 84

Input Signal and Pin No. of the Connector, CN X5 ...................................................................................... 86

Output Signal and Pin No. of the Connector, CN X5 ................................................................................... 92

Connecting Example to Host Controller ....................................................................................................... 96

Trial Run (JOG Run) at Position Control Mode.................... 104

Inspection Before Trial Run ........................................................................................................................ 104

Trial Run by Connecting the Connector, CN X5 ......................................................................................... 104

Real-Time Auto-Gain Tuning ................................................. 106

Outline ........................................................................................................................................................ 106

Applicable Range ....................................................................................................................................... 106

How to Operate .......................................................................................................................................... 106

Adaptive Filter ............................................................................................................................................. 107

Parameters Which are Automatically Set ................................................................................................... 107

Parameter Setup .................................................................... 108

Parameters for Functional Selection .......................................................................................................... 108

Parameters for Adjustment of Time Constant of Gains and Filters ............................................................ 111

Parameters for Auto-Gain Tuning ............................................................................................................... 112

Parameters for Adjustment (2nd Gain Switching Function) ....................................................................... 115

Parameters for Position Control ................................................................................................................. 116

Parameters for Velocity/Torque Control ..................................................................................................... 120

Parameters for Sequence .......................................................................................................................... 120

[Connection and Setup of Velocity Control Mode]

page

Control Block Diagram of Velocity Control Mode ............... 126

Wiring to the Connector, CN X5 ............................................ 127

Wiring Example to the Connector, CN X5 .................................................................................................. 127

Interface Circuit .......................................................................................................................................... 128

Input Signal and Pin No. of the Connector, CN X5 .................................................................................... 130

Output Signal and Pin No. of the Connector, CN X5 ................................................................................. 135

Adjustment

When in Trouble

Supplement

Trial Run (JOG Run) at Velocity Control Mode .................... 138

Inspection Before Trial Run ........................................................................................................................ 138

Trial Run by Connecting the Connector, CN X5 ......................................................................................... 139

Real-Time Auto-Gain Tuning ................................................. 140

Outline ........................................................................................................................................................ 140

Applicable Range ....................................................................................................................................... 140

How to Operate .......................................................................................................................................... 140

Adaptive Filter ............................................................................................................................................. 141

Parameters Which are Automatically Set up .............................................................................................. 141

Parameter Setup .................................................................... 142

Parameters for Functional Selection .......................................................................................................... 142

Parameters for Adjustment of Time Constant of Gains and Filters ............................................................ 146

Parameters for Auto-Gain Tuning ............................................................................................................... 147

Parameters for Adjustment (2nd Gain Switching Function) ....................................................................... 149

Parameters for Position Control ................................................................................................................. 151

Parameters for Velocity/Torque Control ..................................................................................................... 152

Parameters for Sequence .......................................................................................................................... 155

[Connection and Setup of Torque Control Mode]

page

Control Block Diagram of Torque Control Mode ................. 160

Wiring to the Connector, CN X5 ............................................ 161

Wiring Example to the Connector, CN X5 .................................................................................................. 161

Interface Circuit .......................................................................................................................................... 162

Input Signal and Pin No. of the Connector, CN X5 .................................................................................... 164

Output Signal and Pin No. of the Connector, CN X5 ................................................................................. 168

Trial Run (JOG Run) at Torque Control Mode ...................... 171

Inspection Before Trial Run ........................................................................................................................ 171

Trial Run by Connecting the Connector, CN X5 ......................................................................................... 171

Real-Time Auto-Gain Tuning ................................................. 172

Outline ........................................................................................................................................................ 172

Applicable Range ....................................................................................................................................... 172

How to Operate .......................................................................................................................................... 172

Parameters Which are Automatically Set up .............................................................................................. 173

Parameter Setup .................................................................... 174

Parameters for Functional Selection .......................................................................................................... 174

Parameters for Adjustment of Time Constant of Gains and Filters ............................................................ 177

Parameters for Auto-Gain Tuning ............................................................................................................... 178

Parameters for Adjustment (2nd Gain Switching Function) ....................................................................... 179

Parameters for Position Control ................................................................................................................. 181

Parameters for Velocity/Torque Control ..................................................................................................... 183

Parameters for Sequence .......................................................................................................................... 185

[Full-Closed Control Mode]

page

Outline of Full-Closed Control .............................................. 190

What is Full-Closed Control ? ..................................................................................................................... 190

Control Block Diagram of Full-Closed Control Mode.......... 191

Wiring to the Connector, CN X5 ............................................ 192

Wiring Example to the Connector, CN X5 .................................................................................................. 192

Interface Circuit .......................................................................................................................................... 193

Input Signal and Pin No. of the Connector, CN X5 ................................................................................... 195

Output Signal and Pin No. of the Connector, CN X5 ................................................................................. 201

Connection to the Connector, CN X7 .................................. 204

Connector, CN X7 ....................................................................................................................................... 204

Wiring to the External Scale, Connector, CN X7 ........................................................................................ 205

Real-Time Auto-Gain Tuning ................................................. 206

Outline ........................................................................................................................................................ 206

Applicable Range ....................................................................................................................................... 206

Before Using

the Products

How to Operate .......................................................................................................................................... 206

Adaptive Filter ............................................................................................................................................. 207

Parameters Which are Automatically Set up .............................................................................................. 207

Parameter Setup .................................................................... 208

Parameters for Functional Selection .......................................................................................................... 208

Parameters for Adjustment of Time Constant of Gains and Filters ............................................................ 211

Parameters for Auto-Gain Tuning ............................................................................................................... 212

Parameters for Adjustment (2nd Gain Switching Function) ....................................................................... 214

Parameters for Position Control ................................................................................................................. 216

Parameters for Velocity/Torque Control ..................................................................................................... 220

Parameters for Sequence .......................................................................................................................... 220

Parameters for Full-Closed ........................................................................................................................ 224

Preparation

Connection and Setup of

Position Control Mode

[Adjustment]

page

Gain Adjustment .................................................................... 226

Real-Time Auto-Gain Tuning ................................................. 228

Fit-Gain Function ........................................................................................................................................ 231

Connection and Setup of

Velocity Control Mode

Connection and Setup of

Torque Control Mode

Full-Closed

Control Mode

Adaptive Filter ........................................................................ 234

Normal Auto-Gain Tuning...................................................... 236

Release of Automatic Gain Adjusting Function .................. 239

Manual Auto-Gain Tuning (Basic) ......................................... 240

Adjustment in Position Control Mode ......................................................................................................... 241

Adjustment in Velocity Control Mode ......................................................................................................... 241

Adjustment in Torque Control Mode ........................................................................................................... 242

Adjustment in Full-Closed Control Mode .................................................................................................... 242

Gain Switching Function ............................................................................................................................. 243

Suppression of Machine Resonance ......................................................................................................... 246

Automatic Gain Setup Function .................................................................................................................. 248

Manual Auto-Gain Tuning (Application) ............................... 249

Instantaneous Speed Observer .................................................................................................................. 249

Damping Control ......................................................................................................................................... 250

[When in Trouble]

Adjustment

When in Trouble

Supplement

page

When in Trouble ..................................................................... 252

What to Check ? ......................................................................................................................................... 252

Protective Function (What is Error Code ?) ............................................................................................... 252

Protective Function (Details of Error Code) ............................................................................................... 253

Troubleshooting .................................................................... 260

Motor Does Not Run ................................................................................................................................... 260

Unstable Rotation (Not Smooth)/Motor Runs Slowly Even with Speed Zero at Velocity Control Mode .... 261

Positioning Accuracy Is Poor ...................................................................................................................... 262

Origin Point Slips ........................................................................................................................................ 263

Abnormal Noise or Vibration ...................................................................................................................... 263

Overshoot/Undershoot, Overheating of the Motor (Motor Burn-Out) ......................................................... 264

Motor Speed Does Not Reach to the Setup/Motor Revolution (Travel) Is Too Large or Small ................. 264

Parameter Returns to Previous Setup ....................................................................................................... 264

Display of "Communication port or driver cannot be detected" Appears on the Screen While using the

PANATERM

. ............................................................................................................................................. 264

推荐资源

Nucleo心得之了解开发板及开发环境的建立: 本帖最后由 kandy11 于 2014-9-30 23:58 编辑 1、了解开发板。文件下载地址：https://download.eeworld.com.cn/detail/nmg/545598，以下的内容均摘自此文档。JP5主要用于选择供电的方式。电 ......; kandy11 stm32/stm8

ISTP检索的电力与能源工程(PEEC2010)中文会议征文 YZJ: ============================================================= Power and Energy Engineering Conference (PEEC 2010) 电力与能源工程学术会议征文（ISTP(CPCI-S)检索） CALL FOR PAPERS www ......; luozexu 工业自动化与控制

焊贴片用什么烙铁头比较好？: 焊贴片用什么烙铁头比较好？...; yuexian85 PCB设计

看到坛子里有人提及快速充电，看到个文章就先转来了: MIT advance said to recharge batteries in seconds PORTLAND, Ore. — Lithium-ion batteries could be recharged in seconds using a surface treatment invented by researchers at the ......; soso 电源技术

求自动点餐系统的硬件资料: 我是在校的学生,想了解一下求自动点餐系统的硬件知识,请问有谁能提供一些么?如果能给份电路原理图就更好了,谢谢^_^...; YANGYIHU 嵌入式系统

液晶电视选购是大学问: 本帖最后由 jameswangsynnex 于 2015-3-3 20:02 编辑家电卖场，最吸引人的地方莫过于摆满了平面电视的展示墙，各家厂商展示炫丽画面的机种，往往是让挑选电视的使用者手足无措，尤其在这个液 ......; 子乐消费电子

谣言四起、智驾热战，谁在风口浪尖？

智驾圈各有各的节奏。有人忙着推送新版本、低头搞研发，也有人忙着搞宣发，也有人埋头量产。怪就怪在，稍微低调点，就有可能成为谣言的起源。 8 月 19 号，元戎启行官方释放了一段视频，smart 机器人科技有限公司 CEO 陈大宇和元戎启行 CTO 曹通易两人试乘 smart 精灵 5，全程城区辅助驾驶挑战深圳出行高峰。视频中两人有说有笑，主动提到了前段时间网传双方解约的说法。结论就是，根本是...[详细]
深入剖析波峰焊：高效率与高质量的完美结合

波峰焊，是一种重要的电子组件焊接技术，用于生产各种电子设备，从家用电器，到计算机，到航空电子设备。该过程因其高效率和高质量的焊接结果而受到业界的广泛认可。本文将探讨波峰焊是什么，以及其工艺优点有哪些。波峰焊，又被称为波动焊接或浸泡焊接，主要用于通过孔（Through Hole）和表面安装（Surface Mount）电子组件的焊接。其过程包括将具有电子组件的印刷电路板（PCB）引导通过一个...[详细]
导轨回流焊与普通回流焊：为生产效率和质量选择最佳焊接方式

回流焊作为现代电子制造中常见的一种焊接方法，其主要目的是将焊盘、元件引脚和焊膏熔化，形成焊接点。随着技术的发展，焊接设备也在不断升级改良，其中就包括了导轨回流焊和普通回流焊。这两种方法各有优点，也存在各自的局限，所以说哪种更好并不是一个简单的问题，需要从多个角度进行评估。首先，我们来了解一下导轨回流焊。导轨回流焊机是在普通回流焊机的基础上，增加了导轨系统，使得焊接过程更为自动化，通常可以提...[详细]
目前电动汽车还存在哪些方面的安全隐患

随着购买新能源车型的消费者越来越多，电动车的安全性也成为了大家的焦点。尤其是在一系列电动车自燃事件之后，安全性这个话题也被推到了风口浪尖。那么电动车在电池方面存在着哪些隐患呢？一、冷却系统，新能源车型尤其是纯电动车型，是依靠电能作为补给。但电能并没有流入的冷却系统，所以在高温的条件下，电动车极容易发生自燃的事故。即便是现在很多新能源车型采用了水冷，但安全隐患依然存在。二、挤压碰撞，电...[详细]
电动汽车的养护问题该怎么解决

由于政策以及节能等原因，新能源汽车越来越受广大消费者的青睐。车子到手了，接下来少不了保养环节，但由于新能源车的动力结构与传统能源车不同，在保养方面也有所区别。今天就来和大家分享一下，关于电动车的电池养护知识。电动汽车主要针对“电池”和“电机”的维护。电动车在使用过程中，要留意汽车用电的情况，当指针从“H”降到“L”附近时，就意味着我们要为汽车充电了。一般情况下，电动车每天都需要充电，便于电...[详细]
纯电动汽车智能供电系统对我们生活的影响

纯电动汽车作为新能源汽车中的主推车型，近年来得到了国家的大力支持与鼓励，发展也是日新月异，对于纯电动汽车在我们之前的认知，它是一个需要进行充电才能够提供动力输出的一个庞大的耗电体，而在近期发布的车型不知道大家有没有发现，不管是北汽EX5、还是最新发布的几何A都增加了对外放电功能，纯电动汽车摇身一变成为了可充放电的智能移动终端，今天小编就带大家一起纯电动汽车的对外放电功能，看看它究竟会为我们带来哪...[详细]
苹果首款折叠 iPhone 曝料：配自研 C2 基带芯片

8 月 25 日消息，彭博社的马克・古尔曼昨日（8 月 24 日）发布博文，曝料称苹果将于 2026 年推出其首款折叠手机（下文简称 iPhone Fold），一方面会明显减少屏幕折痕，另一方面将搭载其自研的 C2 基带芯片，并采用无 SIM 卡设计、Touch ID 解锁，测试机有黑、白两色。苹果为尽量减少折痕的视觉影响，决定将屏幕触控感应层由 on-cell 技术改为 in-cell 技术...[详细]
英飞凌低噪声放大器在无线数据接收中的应用

　　2014年6月，工信部向联通和电信颁发4G FD-LTE牌照，加上在此之前发放给移动、联通、电信的4G TD-LTE牌照，这意味着国内三大运营商全面进入4G商用化时代，同时各大手机制造商纷纷推出多模、多频的LTE手机和终端，目前国内LTE用户规模已经达到5,000万。　　相对于3G而言，4G LTE能够提供更大的信道容量，手机用户可以享用更高的数据下载速率，在FD-LTE 20MHz...[详细]
解析数字电视机顶盒的关键技术

　　数字电视机顶盒由高频头、QAM解调器、TS流解复用器、MPEG一2解码器、PAUNTSC视频编码器、嵌人式CPU系统和外围接口、CA模块和上行数据调制器组成。工作原理如附图。　　数字电视机顶盒的工作过程大致如下：高频头接收来自有线网的高频信号，通过QAM解调器完成信道解码，从载波中分离出包含音、视频和其他数据信息的传送流门蜀。传送流中一般包含多个音、视频流及一些数据信息。解复用器则用...[详细]
一种新型的电气火灾监控报警系统应用探讨

引言　　据《中国火灾统计年鉴》显示，近十年的火灾事故中，电气火灾所占比例在30%以上，且呈逐年上升的趋势，已成为火灾的主要致灾因素，引起巨大的人财物损失。电气火灾产生的主要原因有短路、过载、接触电阻过大、静电等，其中接地性电弧短路是最危险也多发的电气火灾成因，主要是由于故障点接触不良，未被熔融而迸发出电或者电火花。而且发生电弧性短路的故障点阻抗较大，它的短路电流并不大(略大于300mA的电流...[详细]
利用麦克风数组抑制背景噪声

　　概述　　随着手持语音通信设备越来越流行，它们应用在嘈吵环境的机会也越来越高，例如机场、交通繁忙的路段、人多嘈杂的酒吧等。在这种嘈吵的环境下，通话的双方实在难以听清对方所说的话。　　此外，不少通信系统都是采用计算机运行的语音识别、指令及/或响应系统，这些系统均易受到背景噪声的影响，假如噪声过大，便会导致系统出现很大的偏差。因此，有必要改善语音信号对背景声音噪声的比率。　　本文将解释利用麦...[详细]
是德科技研究发现：人工智能发展速度已超越基础设施准备程度

随着AI在各个行业中加速发展，对数据中心基础设施的需求也在迅速增长是德科技与Heavy Reading合作发布了《超越瓶颈：2025年AI集群网络报告》，探讨运营商如何演进以适应人工智能（AI）工作负载的规模和速度。报告显示近九成（89%）电信和云服务提供商计划扩大或维持AI基础设施投资，其中前三大增长因素分别为云集成（51%）、更高速的GPU（49%）和高速网络升级（45%）。 ...[详细]
安全第一！矿用防爆R型隔离变压器教你保护自己！

通常情况下煤矿井下含有瓦斯和煤尘。当瓦斯和煤尘达到一定浓度时，就会发生瓦斯和煤尘爆炸事故。而电气设备在正常运行或故障时就会产生电弧，电弧也是煤矿燃烧煤气和煤尘的主要火源之一。因此，煤矿的电气设备通常都采用矿用防爆R型隔离变压器。矿用防爆电气的设计制造必须符合国家防爆设备标准。防爆设备的总标志是EX。防爆电气设备的类型、类别、级别和组别以及防爆设备的总标志一起，形成防爆标志。除了防爆电源变压器的明...[详细]
博世发布面向L2+级的新一代SoC（SX600 / SX601）

博世发布新SoC系列以支撑L2+级别的高级驾驶辅助功能，该芯片集成了高分辨率与远距离探测能力，并内置对神经网络推理的支持与车规接口，便于车厂在主流车型上实现自动紧急制动、自适应巡航等功能的升级。图片来源：博世该芯片定位在主流家用轿车和SUV的ADAS平台，可与摄像头、毫米波雷达等传感器融合使用，帮助车企在更广泛的产品线上部署成熟的辅助驾驶功能并提升道路安全准入率。 ...[详细]
英特尔携手亚马逊云科技，打造云服务新引擎

英特尔 ® 至强 ® 6性能核处理器现已支持亚马逊云科技（AWS）上全新推出的亚马逊EC2 R8i和R8i-flex实例。与基于英特尔处理器的其他云实例相比，这两款新实例能为用户提供更卓越的性能和更快的内存带宽。基于英特尔至强6处理器的亚马逊第八代EC2实例正式发布，在云端为客户提供卓越的性能与更高的内存带宽这两款新实例不仅是英特尔与AWS多年深度合作的丰硕成果，也充分展现了双方正...[详细]

器件捷径: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多