™
SYSTEM
P
AN
-S
Header-18pt.
This is
TEEL
System Catalog
SA# 101N16J-NL
Prim e m oving products from PANDUIT are part numbers printed in bold typeface .
They are stocked items for r apid response and available from our local distributors.
Table of Contents –
SA101N16J-NL
™
™
Page
P
AN
-S
TEEL
Stainless Steel Ties – Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
P
AN
-S
TEEL
Stainless Steel Ties – MLT Series and
W
AVE
-T
Y
Series . . . . . . . . . . . . . . . . . . . . . . . . . . .4
P
AN
-S
TEEL
Custom Length Banding System – MBS & MBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Coated Stainless Steel Ties – MLTC Series and Cushion Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Double Wrapped Stainless Steel Ties – MLTDH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation Tools for Type MLT, Type MLTC and Type MLTDH Stainless Steel Cable Ties . . . . . . . 8-9
Stainless Steel, Brass, and Aluminum Marker Plates and Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Custom Marking Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Metal Marking Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Metal Accessories & Design Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Stainless Steel Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Telcommunications Stackable Cable Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Stainless Steel Tie Technical Data – MLT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
P
AN
-S
TEEL
Stainless Steel Strapping System and Custom Length Strapping System . . . . . . . . 22-23
Nylon Coated Stainless Steel Strapping System and Strapping Installation Tool . . . . . . . . . . . . . .24
P
AN
-S
TEEL
Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
METAL TIES
P
A N
-S
T EEL
(MLT Series):
Metal Locking Ties, Ball Lock Version in .18" (4.4mm) and .31" (7.9mm) widths
CUSTOM LENGTH BANDING SYSTEM:
Ball Lock Version in Reels of 250 ft. (76m) and 1000 ft. (305m); .18" (4.4mm)
and .31" (7.9mm) widths
METAL STRAPS
STAINLESS STEEL STRAPS (MS Series)
: Fold-Over Buckle Design in .375" (9.5mm), .500" (12.7mm) and .625"
(15.9mm) widths
CUSTOM LENGTH STRAPPING SYSTEM:
Fold-Over Buckle Design Provided in Reels of 200 ft. (61m); .375"
(9.5mm), .500" (12.7mm) and .625" (15.9mm) widths
Stainless Steel Systems And Explanations
Approvals
Military Specification
MIL-S-23190E
LISTED
E56854
ABS Pro gram s
Cert. 99CH18282-X
Un ited States
Coast Guard
Bureau Veritas
D et Norske Veritas
Lloyd’s Register of Shipping
Germanischer Lloyd
RINA
For Technical Assistance, call: 866-405-6659 (outside the U.S., see
page 28
for International Directory)
1
P
AN
-S
TEEL
™
Stainless Steel Ties –
Overview
PANDUIT P
AN
-S
TEEL
Stainless Steel Locking Tie
Design Features (MLT Series)
The
P
AN
-S
TEEL
system provides a strong, durable method of bundling, identifying and fastening, which
can be used in virtually all indoor, outdoor and underground (including direct burial) applications, including
applications where severe environmental conditions exist. The ties are designed for use in critical
applications where vibration, radiation, weathering, corrosion and temperature extremes are a factor
(refer to
page 21
for chemical resistance char t).
HIGH STRENGTH
•
100 lb. (445N) and 250 lb. (1112N) minimum loop tensile strengths per Military Standard MIL-S-23190
(refer to
page 20
for details); 120 lb. (534N) for the coated cable ties per Military Standard MIL-S-23190
and 600 lb. (2668N) for the double wrapped ties per Military Standard MIL-S-23190
SAFE TO HANDLE
•
Rounded sides and smooth surfaces—safe to handle (see below)
FAST INSTALLATION
•
Low profile, self-locking tie is easy to
thread for fast installation
•
No special tools required for installation
MATERIAL
Height o f locking head
Stand ard Cross
Section T ies
H = .16" (4.1mm )
Heavy Cross
Section Co ated Ties
H = .235" (6.0mm )
Non-magnetic stainless steel
•
304—most common for typical outdoor applications
•
316—for superior corrosion resistance in salt water and spray applications
TEMPERATURE CAPABILITY
Type 304 – -112°F (-80°C) to 1000°F (538°C)
Type 316 – -112°F (-80°C) to 1000°F (538°C)
Type 321 – -112°F (-80°C) to 1700°F (925°C)
(Refer to
page 20
for details.)
Heavy Cross
Section T ies
H = .21" (5.3mm )
Heavy Cross
Section Do uble
Wrap ped Ties
H = .21" (5.7mm )
Contact the facto ry for registrar and
product sco pe informatio n
Advantages of the Rounded Sides of
P
AN
-S
TEEL
Stainless Steel Ties
Cross sectional view of other
manufacturer’s tie body. (Photo
micrograph shown is magnified 150X.)
Cross sectional view of
PANDUIT
tie
body. (Photo micrograph shown is
magnified 150X.)
Side view of
PANDUIT
tie.
The
P
A N
-S
TEEL
Stainless Steel cable tie is designed for superior comfor t and safety when handling due to its
fully rounded sides and smooth surfaces. Smooth surfaces and rounded sides assure cable protection and
operator safety.
PANDUIT
not only removes the burr, but actually passes the material through a secondary
process which removes the top and bottom corners of the material.
2
This
Overview
P
AN
-S
TEEL
™
Stainless Steel Ties –
is Header-18pt.
PANDUIT P
A N
-S
TEEL
Stainless Steel Locking Tie (MLT Series)
The unique self-locking design simplifies installation and
eliminates any protruding ends when used with
PANDUIT
installation tooling (refer to
pages 8, 9
and
10)
on resilient bundles.
Other bundles can be made resilient by the use of PCS cushion
sleeving (refer to
page 6).
Two widths are available: .18" (4.4mm)
and .31" (7.9mm) both .010" (0.254mm) thick and provide 100 lb.
(445N) or 250 lb. (1112N) minimum loop tensile strength per
MIL-S-23190. Available in stock lengths for outside bundle
diameters up to 14" (356mm). Large lengths can be custom made
or use the custom length banding system to provide unlimited
lengths (see
page 5
for details).
Exclusive Locking Method
Typical Cable Bundle
Locking Head Cross Section
Unique stainless steel ball locking design allows smooth entry of the tie body for ease of threading. The ball
is permanently entrapped in the head portion of the tie. When the tail of the tie is passed through the locking
head, the tail is forced upward by the ramp (see drawing) which creates constant contact between the tie
and the locking ball. This contact assures locking in any position (upside down, sideways, etc.). When
locked on a bundle, the ball, working in conjunction with the angled ramp of the head, provides a positive
mechanical wedge locking action. The forces created by this wedging action are so great that mechanical
deformation of the tie body occurs at the point of contact between the ball and tie, locking the tie.
Self-Locking Head for Fast Installation
1. Place tie around bundle, put tip
2. Use one of the
PANDUIT
P
AN
-S
TEEL
installation tools
through head and pull up tight
by hand.
to tension and cut off excess
tail quickly.
For additional tool information
refer to
pages 8
,
9
and
10
for details.
The stainless steel metal locking tie series
can be fastened by hand as shown in
Photo 1.
No tools are required. Just place
around bundle, pull the tip of the tail through
the locking head and pull up tight by hand.
The self-locking head secures the tie in place.
Photo 2
shows the metal locking tie series
being installed with the
PANDUIT
GS4MT tool
which automatically tensions and cuts off
excess tie. The system provides adjustable
tension control and automatic cut-off for quick,
consistent and secure installation with the
lowest installed cost.
Part Number System Example – MLT Series
(Stock Size Tie)
MLT
Part Description
Metal
Locking
Tie
6
Bundle
Diameter
Reference
(inches)
S
Cross-
Section
S = Standard
H = Heavy
—
CP
Package Qty.
Q
= 25
L* = 50
LP** = 50
CP = 100
*Stan dard C ross-Sectio n
** Heavy Cro ss-Section
Material
(blank) = 304
316
= 316
3
P
AN
-S
TEEL
™
Stainless Steel Ties –
MLT Series
P
AN
-S
TEEL
Stainless Steel Ties
Part
Number
Material Min. L oop
&
Tensile
Cross Streng th
Section Lb s. (N *)
Max.
Bund le
Dia.
in. (mm)
Len gth **
in. (mm)
T hickness
&
Wid th
in. (mm )
Reco mmend ed
PANDU IT
Installation
Tool ***
Part Num ber
Pkg. Ctn .
Qty. Qty.
Type AISI 304
MLT1S-CP
MLT2S-CP
MLT2S-L
MLT2.7S-CP
MLT4S-CP
MLT4S-L
MLT6S-CP
MLT8S-CP
MLT10S-CP
MLT12S-Q
MLT14S-Q
MLT15S-Q
MLT2H-LP
MLT2.7H-LP
MLT4H-LP
MLT6H-LP
MLT8H-LP
MLT10H-LP
MLT12H-Q
MLT14H-Q
1.00(25)
5.0(127)
2.00(50)
7.9(201)
2.00(50)
7.9(201)
2.70(69) 10.2(259)
4.00(102) 14.3(362)
4.00(102) 14.3(362) .010(0.25)
X
6.00(152) 20.5(521) .18(4.4)
8.00(203) 26.8(679)
10.00(254) 33.0(838)
12.00(305) 42.0(1067)
14.00(356) 47.0(1194)
15.00(380) 49.2(1250)
2.00(50)
7.9(201)
2.70(69) 10.2(259)
4.00(102) 14.3(362) .010(0.25)
6.00(152) 20.5(521)
X
8.00(203) 26.8(679) .31(7.9)
10.00(254) 33.0(838)
12.00(305) 42.0(1087)
14.00(356) 47.0(1194)
1.00(25)
2.00(50)
4.00(102)
6.00(152)
8.00(203)
10.00(254)
5.0(127)
7.9(201)
14.3(362) .010(0.25)
X
20.5(521) .18(4.4)
26.8(679)
33.0(838)
100
100
50
100
100
50
100
100
100
25
25
25
50
50
50
50
50
50
25
25
100
100
100
100
100
100
50
50
50
50
50
500
500
500
500
500
500
500
500
500
125
125
125
250
250
250
250
250
250
125
125
500
500
500
500
500
500
250
250
250
250
250
MLT-S Standard Cross-Section:
.18" (4.4mm) wide.
304
Std.
100
(445)
MLT-H Heavy Cross-Section:
.31" (7.9mm) wide.
PPTMT
GS4MT
ST2MT
or
HTMT
304
Hvy.
250
(1112)
The
P
AN
-S
TEEL
system provides a
strong durable method of bundling,
identifying and fastening. Can be
used in vir tually all indoor, outdoor
and underground (including direct
burial) applications, especially
where severe environmental
conditions exist.
Type AISI 316
MLT1S-CP316
MLT2S-CP316
MLT4S-CP316
MLT6S-CP316
MLT8S-CP316
MLT10S-CP316
316
Std.
100
(445)
MLT2H-LP316
2.00(50)
7.9(201)
Three types of materials available:
MLT4H-LP316
4.00(102) 14.3(362) .010(0.25)
316
250
AISI 304 non-magnetic stainless
MLT6H-LP316
6.00(152) 20.5(521)
X
Hvy.
(1112)
MLT8H-LP316
8.00(203) 26.8(679) .31(7.9)
steel—for most applications;
MLT10H-LP316
10.00(254) 33.0(838)
AISI 316 non-magnetic stainless
*Per Military Specification MIL-S-23190. For additional details, see
page 20
.
steel–for applications requiring
**Other lengths available, contact factory
.
***Refer to
pages 8
,
9
and
10
for information on installation tools.
superior corrosion resistance.
Order number of ties required in multiples of Pkg. Qty.
AISI 321 non-magnetic stainless
steel material for high temperature
applications. Contact factor y for details.
PPTMT
GS4MT
ST2MT
or
HTMT
L ISTED
™
Part
Number
Material Min. L oop
&
Tensile
Cross Streng th
Section Lb s. (N *)
Max.
Bund le
Dia.
in. (mm)
Length
in. (mm)
T hickness
&
Wid th
in. (mm )
Reco mmend ed
PANDU IT
Installation
Tool ***
Part Num ber
Pkg. Ctn .
Qty. Qty.
Superior Grip
Stainless
Steel Ties
W
AVE
-T
Y
SERIES
MLT2.7WH-LP
MLT4WH-LP
MLT6WH-LP
MLT8WH-LP
MLT10WH-LP
304
Hvy.
200
(890)
2.70(70)
4.00(102)
6.00(152)
8.00(203)
10.00(254)
10.2(259)
14.2(361)
.010(0.25)
20.5(521)
X
.31(7.9)
26.8(631)
33.0(838)
PPTMT
GS4MT
ST2MT
or
HTMT
50 250
50 250
50 250
50 250
50 250
*Per Military Specification MIL-S-23190. For additional details, see
page 20
.
***Refer to
pages 8
,
9
and
10
for information on installation tools.
Order number of ties required in multiples of Pkg. Qty.
APPLICATION TOOL
(PA
NDU IT
GS4MT
SHOWN)
The Patented WAVE FORM Spring in the
W
A VE
-T
Y
•
Tightly clamps on applications where other
stainless steel ties will not function
•
Retains tension on a solid bundle with minimal
applied force
•
Tension may be created with a manual tool or
PANDUIT
installation tooling
•
Available in Type 304 and 316 stainless steel
DU RING INSTA LLATION
WAVE SPRING IS BEING
STRETCHED B Y A PPLICATION TOOL
AFTER INSTA LLATION
WAVE SPR IN G
CONTRACTS, R ESULTIN G
IN SU PERIOR GRIP ON
RIGID SUR FACES.
4
Prime moving products app ear in
BOLD
.
This is
System
P
AN
-S
TEEL
™
Custom Length Banding
Header-18pt.
Custom Length Banding System MBS and MBH Banding
Part Nu mber
Cross
Section
Min. Lo op
Ten sile
Strength
Lbs. (N *)
Max.
Bu ndle
Dia.
in. (mm )
Leng th
ft. (m)
Th ickness
&
Width
in . (mm)
Recom -
mended
To ol **
Recom-
mend ed
Ban ding
Head
Pkg.
Qty.
Type AISI 304
MBS-TLR
MBS-MR
MBH-TLR
MBH-MR
Std.
Std.
Hvy.
Hvy.
100 (445)
100 (445)
250 (1112)
250 (1112)
Any
Any
Any
Any
.010 (0.25)
X
PPTMT
1000 (305) .18 (4.4)
GS4MT
ST2MT
.010 (0.25)
250 (76)
or
X
HTMT
1000 (305) .31 (7.9)
250 (76)
MTHS-C
MTHS-C
MTHH-C
MTHH-C
1
1
1
1
•
For applications that require
bundling various bundle diameters
•
Supplied in reels of 250 ft. (76m)
or 1000 ft. (305m)
•
Lets you bundle any size
bundle diameter
•
To use, pull out as much banding
as needed, cut off with
PANDUIT
GS4MT with CAMT accessory
(refer to
page 9)
or with shears
and install with MTHS or MTHH
banding heads (shown below)
Type AISI 316
MBS-TLR316
MBS-MR316
MBH-TLR316
MBH-MR316
Std.
Std.
Hvy.
Hvy.
100 (445)
100 (445)
250 (1112)
250 (1112)
Any
Any
Any
Any
MTHS-C316
.010 (0.25) PPTMT
X
1000 (305)
GS4MT MTHS-C316
.18 (4.4)
ST2MT
250 (76)
or
MTHH-C316
.010 (0.25)
HTMT
X
1000 (305) .31 (7.9)
MTHH-C316
250 (76)
1
1
1
1
*Per Military Specification MIL-S-23190. For additional details, see
page 20
.
**The GS4MT with CAMT accessory is recommended for cutting the banding. This system provides a straight cut-off
which assists in head assembly and eliminates the need for shears. Refer to
pages 8, 9
and
10
for information on
installation tools.
Pkg. -MR = 1000 ft. (305m) reel and -TLR = 250 ft. (76m) reel.
Order number of reels required.
To determine the proper amount of banding r equired, use the following formula.
To Determine Length of Banding Needed
Calculate
Diameter inches (mm) X 3.14
+ 3 inches (76 mm)
Example: 10 in. (250 mm) Diameter Bundle.
10 in. (250 mm) X 3.14 = 31.40 + 3 in. (785 mm +
76 mm) = 34.40 in. or 35 in. of banding (861 mm
of banding) required.
MTHS and MTHH Banding Heads
Part Numb er
D escriptio n
Pkg.
Qty.
Ctn .
Qty.
MTHS-C
MTHS-C316
MTHH-C
To use, take one end of the cut
banding and bend back ½" (13mm).
Take a self-locking head and slide it
the entire length of the band until it
reaches the bend. Bend tail flat
against bottom of banding head to
complete assembly.
MTHH-C316
Loose piece banding head for standard cross section banding,
304 stainless steel.
Loose piece banding head for standard cross section banding,
316 stainless steel.
Loose piece banding head for heavy cross section banding, 304
stainless steel.
Loose piece banding head for heavy cross section banding, 316
stainless steel.
100
100
100
100
1000
1000
1000
1000
Refer to
pages 8, 9
and
10
for information on installation tools.
Order number of banding heads required in multiples of Pkg. Qty.
Prim e moving products appe ar in
BOLD
.
5
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
