Datasheet> 器件分类 > 开发板/开发套件/开发工具> MAX17544EVKITB#

文档预览

MAX17544EVKITB#: 产品描述EVAL KIT FOR MAX17544; 产品类别开发板/开发套件/开发工具; 文件大小4MB，共55页; 制造商Maxim(美信半导体); 官网地址https://www.maximintegrated.com/en.html; 标准

下载文档详细参数全文预览

MAX17544EVKITB#概述

EVAL KIT FOR MAX17544

MAX17544EVKITB#规格参数

参数名称	属性值
主要用途	DC/DC，步降
输出和类型	1，非隔离
电压 - 输出	5V
电流 - 输出	3.5A
电压 - 输入	7.5 V ~ 42 V
稳压器拓扑	降压
频率 - 开关	500kHz
板类型	完全填充
所含物品	板
使用的 IC/零件	MAX17544

文档预览

下载PDF文档

全文
预览

EE-SIM Design and Simulation Environment

User Guide

UG5861; Rev 2; 8/17

Abstract

This User Guide contains detailed instructions for using the EE-Sim Design and Simulation Environment.

This free online tool suite enables design, simulation, analysis, and purchasing ability for a variety of

analog and power solutions. The EE-Sim System Power tool provides customized DC-DC and sequencer

recommendations for multi-rail or multi-load systems including processor, SoC,

µC,

and FPGA designs.

EE-Sim tools automatically create a circuit schematic based on your requirements, saving precious

design time and resources. Set up and complete simulations in just minutes. Take advantage of

additional features such as sharing designs with colleagues, ordering BOMs from distributors, printing

complete reports, and downloading a free version of EE-Sim SE, which includes node-locked versions of

the Simplis and SIMetrix simulation engines.

Table of Contents

.....................................................................................

1.1 Introduction ...............................................................................................................................................................................4

1.2 Basic User Prerequisites ..................................................................................................................................................4

1.3 Conventions Used in This Manual...............................................................................................................................4

1.4 Register as a New User .................................................................................................................................................... 5

1.5 Open the EE-Sim Tool Suite ........................................................................................................................................... 5

1.5.1

1.5.2

1.5.3

1.5.4

1.5.5

1.5.6

Start a New EE-Sim Design .............................................................................................................................................................................................. 5

Start EE-Sim as the Recipient of a Shared Design ..................................................................................................................................................6

Open an Existing Design....................................................................................................................................................................................................6

Save Changes to Your Own Design ............................................................................................................................................................................. 7

Save Changes to a Shared Design................................................................................................................................................................................. 7

Close the EE-Sim Tools ......................................................................................................................................................................................................8

1.6 Web Browsers Support Easy Automatic Logins ....................................................................................................8

........................................................

2.1 My Designs...........................................................................................................................................................................9

2.1.1

2.1.2

2.1.3

2.1.4

Create a New Contact ......................................................................................................................................................................................................10

Manage Your Contacts ....................................................................................................................................................................................................10

Share a Single Design ......................................................................................................................................................................................................... 11

Share Multiple Designs ..................................................................................................................................................................................................... 11

2.2 Use Reference Designs from Maxim ........................................................................................................................ 12

................................................................

3.1

3.2

3.3

3.4

3.5

3.6

Open an Existing Design ............................................................................................................................................... 13

Create a New Design ...................................................................................................................................................... 13

Specify Input, Output, and Other Design Requirements .................................................................................. 14

Create a Schematic and Save Your Design ............................................................................................................ 15

Next Steps ........................................................................................................................................................................... 15

Edit a Schematic ............................................................................................................................................................... 16

3.6.1

3.6.2

3.6.3

3.6.4

3.6.5

3.7.1

3.7.2

3.7.3

Edit Component Properties ............................................................................................................................................................................................ 16

Select a New Vendor Part ............................................................................................................................................................................................... 17

Annotate a Schematic Using the Toolbar ............................................................................................................................................................... 19

Schematic Toolbar Reference Chart .......................................................................................................................................................................... 21

Version History ................................................................................................................................................................................................................... 25

Run a Simulation and Generate Waveforms ........................................................................................................................................................ 26

View Simulation Waveforms ....................................................................................................................................................................................... 28

Customize the Waveform Viewer Output ............................................................................................................................................................ 28

3.7 Simulation and Analysis ............................................................................................................................................... 26

3.8 Compare Design Iterations ......................................................................................................................................... 34

3.9 Generate a Design Report and BOM (DC-DC) ................................................................................................... 36

3.9.1

3.9.2

Publish a Design Report and BOM ............................................................................................................................................................................ 36

Download the BOM, Report, and Schematic ........................................................................................................................................................ 37

......................................................................

4.1 Create a New System Power Processor Design.................................................................................................. 38

4.1.1

4.1.2

Create a New FPGA Processor Design and Schematic ................................................................................................................................... 38

Create a New Processor/SoC/Custom Load Design and Schematic ...................................................................................................... 39

4.2 Next Steps ......................................................................................................................................................................... 40

Maxim Integrated

Page 2 of 55

4.3 Modifying System Power Schematics ................................................................................................................... 40

4.3.1 Add and Connect Product Components ............................................................................................................................................................... 40

4.3.2 Select a Component .......................................................................................................................................................................................................... 41

4.4 Sequencing ........................................................................................................................................................................ 43

4.4.1 Add a Sequencer ................................................................................................................................................................................................................ 43

4.4.2 Edit the Group/Rail Assignments and View the Timing Diagrams ........................................................................................................... 43

4.5 Generate a Summary Page and BOM (System Power) ...................................................................................44

4.5.1 Explore the System Power Tool Summary Page .................................................................................................................................................44

4.5.2 Generate and Print a Summary Page........................................................................................................................................................................ 45

4.5.3 Generate and Save a BOM ............................................................................................................................................................................................ 45

.......................................................................................

..............................................................................

.....................................

7.1

7.2

7.3

7.4

Download EE-Sim SE .....................................................................................................................................................48

Install EE-Sim SE ..............................................................................................................................................................48

Start Using the EE-Sim SE Application for Windows ......................................................................................... 51

Download a Schematic ................................................................................................................................................. 53

..........................................................................................

..................................................................................

Maxim Integrated

Page 3 of 55

1.1

Getting Started

Introduction

The Maxim EE-Sim

tool suite enables registered members of the Maxim Integrated online community to design, simulate,

analyze, and purchase a variety of analog and power solutions.

Automatically create a circuit schematic based on your requirements in the EE-Sim environment, saving precious design time

and resources. Set up and complete simulations in just minutes, and take advantage of the following additional EE-Sim tool

features:

▪

Share designs with colleagues.

▪

Order a bill of materials (BOM) from your preferred distributor.

▪

Electronically download, send, or print a complete design report with customized schematics and

simulation graphs.

▪

Download a free version of the EE-Sim Simulation Engines (EE-Sim SE) for more detailed and flexible

simulation capabilities.

While using EE-Sim tools, don't forget to explore the other features and benefits of online membership with Maxim Integrated.

1.2

Basic User Prerequisites

This manual assumes you are familiar with basic use of the Windows® or Mac OS®X operating systems, user

interfaces, and supported web browsers. For example, click, double-click, hold your mouse down, drag, release a

mouse, and identify different mouse pointers or cursor icons and know what they mean. For example, wait for a

spinning pointer or click a hyperlink with the familiar first finger of the Link Select mouse pointer. While no claim

of ADA or Section 508 compliance is made, because this tool runs in a web browser, additional screen readers and

input devices are considered compatible.

1.3

Conventions Used in This Manual

▪

Items in a list where one or more choices or lists of substeps that can be perform in

any order

appear with bullets. For example:

▪

Option 1

▪

Option 2

▪

Option 3

▪

Items in a procedure where each step should be performed in a recommended and often required

sequence appear in numbered and lettered lists. Verify that you complete a step before

attempting the next step. For example:

▪

Key areas of screen images appear with callout numbers in circles and are explained in greater

detail with matching numbers in a table below the infographic. These infographics often imply

a recommended sequence, but they do not represent a series of required steps in a procedure.

The screenshots are sometimes modified to demonstrate how the software behaves.

Maxim Integrated

Page 4 of 55

推荐资源

MATLAB在FPGA开发中的应用: ...; 白丁 FPGA/CPLD

zzuCOSII在VS2010上移植: 本帖最后由 darktemple 于 2017-7-18 11:20 编辑初学ucosII的朋友可以不用vc6.0那种古老的编译环境了！ ...; darktemple 实时操作系统RTOS

STM32F103CBADC自效准有bug吗？: 用32F103CB AD测量6路电池电压，范围1－28V电压只通过电阻分压直接输入AD管脚，采用6路循环DMA自动采集方式，通过数字滤波基本可以到2mV内的跳动，现在碰到一个奇怪的现象：进行多次上电， ......; 三生石 stm32/stm8

lm3s 811 被弄得锁死了: 本帖最后由 paulhyde 于 2014-9-15 03:33 编辑今天背啊，同学借板子玩，就把JATG锁死了，挨。教训啊，我应该说清楚的。又要等着换芯片啊。挑战啊。换个开发板，大家有什么推荐的吗？谢谢大家 ......; 493025560 电子竞赛

NJR_Wearable_Shanghai_201608: 280565 ...; lemonade815 汽车电子

集成电路的检测方法: 编者按：虽说集成电路代换有方，但拆卸毕竟较麻烦。因此，在拆之前应确切判断集成电路是否确实已损坏及损坏的程度，避免盲目拆卸。本文介绍了仅用万用表作为检测工具的不在路和在路检测集成电路 ......; fighting 测试/测量

通过串口利用printf函数输出数据

　　一。printf函数格式　　printf函数具有强大的输出功能　　%表示格式化字符串输出　　目前printf支持以下格式的输出，例如：　　printf( %c ,a);输出单个字符。　　printf( %d ,a);输出十进制整数。　　printf( %f ,a);输出十进制浮点数. 　　printf( %o ,a);输出八进制数。　　printf( %s ,a);输出字符串。...[详细]
倒装焊与球栅阵列封装：电子行业的关键技术

倒装焊(Flip-Chip)和球栅阵列封装（Ball Grid Array，简称BGA）是电子行业中广泛使用的两种封装技术。这两种封装技术各有优势和局限性，而且在某些情况下，它们可以互相补充，以满足更复杂的设计需求。首先，我们来了解倒装焊。倒装焊是一种封装技术，其中半导体芯片被“倒装”并直接焊接到电路板或基板上。这种方法使得芯片的主动元件面对着基板，可以直接与其接触，从而提高了热性能和电性...[详细]
解析Android移动设备的传感器技术

在移动技术中，传感器是被测量信号输入的首要技术，也是传感器系统中的元件组成部分，它包括载体和电路连接的敏感元件和转换元件，但是传感器系统却是组合某种信息处理能力元件的传感器。Android平台应用的传感器技术有姿态传感器技术、光电传感器技术、磁场传感器技术和加速度传感器技术等诸多耀眼的传感器技术，传感器系统功能非常强大，很多人还不知道是传感器为用户提供了巨大的便利。传感器是一种检测装置，是实...[详细]
宝马将全景天窗改造成电视几乎覆盖整个车顶

据外媒报道，宝马（BMW）刚刚获得了一项屏幕专利，该屏幕可以覆盖整个车顶。宝马希望将车辆顶棚（headliner）至少大部分变成显示屏。宝马指出全景玻璃天窗存在重量过大、安全性不足、以及导致座舱过热等问题，因此将这块巨型屏幕作为普通玻璃的潜在升级选项。（图片来源：宝马公司）该曲面显示屏幕将覆盖车辆顶棚90%以上的面积。当乘客仰视时，其视野主体将由屏幕占据。该屏幕并非用于娱乐内容播放或...[详细]
『新品发布』共模半导体重磅发布高效率小尺寸降压电源模块GM6506系列产品

共模半导体正式发布其最新一代电源管理芯片—GM6506系列，这是一个完全集成的高频同步整流降压电源模块，内部集成了电感和多个关键器件，简化了电路设计。这款芯片凭借其卓越的性能、低功耗设计以及广泛的应用场景，为各种高要求的电源应用提供了理想的解决方案。无论是光通信、服务器、电信，还是工业及自动化测试领域，GM6506都能满足高效、稳定电源需求。一产品介绍 GM6506 是一个非...[详细]
嵌入式大佬给你分析stm32串口

　　stm32作为现在嵌入式物联网单片机行业中经常要用多的技术，相信大家都有所接触，今天这篇就给大家详细的分析下有关于stm32的出口，还不是很清楚的朋友要注意看看了哦，在最后还会为大家分享有些关于stm32的视频资料便于学习参考。　　什么是串口　　UART : Universal Asynchronous Receiver/Transmitter 通用异步收发器　　USART : Uni...[详细]
stm32相关笔记——ADC部分

我们在学习一门技术的时候，应该对它的理论部分有所了解，然后才能在实践中进一步加深理解，进而掌握。对于stm32来说，我认为学习的时候应该先仔细阅读相关的参考手册，然后再动手实践，这样才能理解得更加透彻，掌握得更加牢固！今天记录一下我学习stm32的ADC部分的了解。 1.介绍小结：stm32的ADC有18个通道（16个外部通道+2个内部通道），有单次、连续、扫描和间断四种模式，ADC...[详细]
STM32定时器应用——PWM

STM32的定时器有三种，高级定时器（TIM1和TIM8），通用定时器（TIM2、TIM3、TIM4、TIM5）和基本定时器（TIM6和TIM7）。这三者的区别是：基本定时器：基本定时器功能比较简单，主要是计时，也可以为DAC提供时钟，直接触发驱动DAC 通用定时器：通用定时器除了基本的定时功能外，还可以测量输入信号的脉冲长度，也就是输入捕获功能，也可以产生输出波形，即输出比...[详细]
电动汽车有辐射，长期驾驶会致癌？

随着我国电动汽车的高速发展，人们也开始关注到电动汽车的辐射问题，我们都知道手机是有辐射的，那么比手机电池大几十倍的电动车是否辐射更大？会不会对人体造成伤害呢？今天我们就来聊聊有关辐射的那些事儿。现如今，只要我们还活着就无法避免辐射，像太阳光、电脑、手机、微波炉、wifi等都会产生一定量的辐射。只要温度在绝对零度以上，都会以电磁波或者是粒子的形式对外输送热量，这种方式就叫做辐射，但是根据其能...[详细]
工业电脑的机器视觉

带有GPU的工业电脑利用强大的并行处理来建立深度学习模型，以分析和响应光学输入。系统形成对视觉数据的理解，以启动预防性维护、设备重定向、系统重新校准、资源重新分配或人工干预。机器视觉为工业设施带来了一些进步。机器视觉，也被称为机器的眼睛，是指计算机使用一个或多个摄像机进行观察的能力。它捕捉图像，对其进行处理，并创建一个动作课程。尽管这些步骤听起来很耗时，但它是以光速完成的。唯一耗时的过程是...[详细]
了解这几点，飞创直线电机模组如何选型轻松搞定

直线电机模组因行程长、速度快、精度高、运行平稳、寿命长等优势，成为各领域的“甜点”，不同型号的直线电机模组可以达到不同的效果，直线电机模组选型正确与否，不仅影响产品的使用，还影响着直线模组后续功能的发挥，给设备和项目推进带来各种问题，因此我们在选购直线电机模组时，需要了解以下几点。飞创直线电机模组的选型可以根据负载、有效行程、重复定位精度、运行速度和加速度、应用环境、安装方式这几个重要参数...[详细]
STM32F103-串口IAP

一、IAP是什么 IAP即为In Application Programming,解释为在应用中编程，用户自己的程序在运行过程中对User Flash的部分区域进行烧写。即是一种对单片机flash擦写的一种编程方案。通常情况下，一片stm32单片机的flash只有一个用户程序，而IAP编程则是将单片机的flash分成至少两大区域，一部分叫做bootloader区，一部分叫做app用户代码区，还...[详细]
stm32启动过程

startup_stm32f10x_cl.s 互联型的STM32F105xx，STM32F107xx startup_stm32f10x_hd.s 大容量的STM32F101xx，STM32F102xx，STM32F103xx startup_stm32f10x_hd_vl.s 大容量的STM32F100xx startup_stm32f10x_ld.s 小容量的STM32F101xx，STM3...[详细]
STM32 Keil C++编写单片机程序

C++ 属于面向对象的编程语言，OOP的思想不必多说，特别对于复杂的软件工程来说，利用OOP绝对是事半功倍，相对于传统的C来说；当然用C来写单片机程序无可厚非，已经延续了一个传统，从大学时学的开始到工作岗位，好多人都是一直用C来做，但是既然Keil支持C++编译，可以用C++来编写你的代码，可以利用高级语言来结构化，清晰化你的程序，为嘛不用呢！哈哈，个人看法！下面进入正题： C+...[详细]
什么电机可以用可控硅调速？

可以使用可控硅调速的电机非常之多，各种行业基本都可用到。各种类比如：风机、风扇、水泵、交流电机、直流电机、力矩电机、单相、三相、高压、低压都可以用到。唯一不同的是，各种场合要求不一样，其控制也千差万别。上海沐天机电设备有限公司是一家专业生产可控硅直流调速，可控硅力矩电机控制器的公司，公司产品全面，种类繁多，单可控硅调速器的产品就有以下几类： 1.单相直流电机调速：ZKS-0.3KW/D...[详细]

器件捷径: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多