Barometric Pressure Sensor
Evaluation Board: MEX-1031
Quick Start Guide
1
1
murata.com
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
19 June 2017
19 June 2017
Barometric Pressure Sensor
Evaluation Board: MEX-1031
•
This Evaluation Board will support you to study and check how our
barometric pressure sensor(ZPA2326-0311A) works and its
performance.
–
Specifications
•
Rated Voltage : 3.3V
•
Output signal
•
Dimension
: I2C
: 12.5×8mm
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
19 June 2017
2
Quick Start Guide : Barometric Pressure Sensor
Barometric Pressure sensor device is
capacitive type MEMS device combined
with ASIC with I2C interface. Since its
voltage level is 1.8V, there’s level converter
on this board, which enables user to
connect directly to 3.3V system.
Via I2C, we can obtain barometric pressure
and temperature info as well.
VCC(3.3V)
I2C(SCL)
3.3V
I2C(SDA)
DC/DC
3.3V1.8V
Level
Converter
Barometric
Pressure
Sensor
19 June 2017
1.8V
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
3
Software Operation
For operation modes and I2C commands, please refer to specsheet.
In our sample code, we operate it in one-shot mode and obtain air pressure and
temperature twice a second.
Main loop()
Configure into
ONESHOT mode
Read data from register
Calculation
& Display
Wait 500ms
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
19 June 2017
4
Pin Connection
Pin connection to each CPU board is also
instructed in sample code.
Evaluation Board
VCC
Arduino UNO
3.3V
SCL
SDA
GND
A5
A4
GND
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
19 June 2017
5