Rev. A (12/17) Page 1 of 3
Eco-Oven™ SMT Oven Cleaner
Product# 1573
(replaces 1691)
Product Description
Cleans reflow ovens, wave soldering systems, and associated heat
exchanger systems by removing all types of flux residues (e.g. water-
based, RMA, no-clean, lead-free). Used for periodic preventative
maintenance to keep equipment running at top levels. It is fast
acting and more effective than IPA for baked-on flux residues.
One gallon container (1573-G) recommended for wave solder finger
cleaning. Just pour into the designated reservoir of your wave
soldering machine. Trigger pump on quart (1573-QT) eliminates the
need for propellants, which can have a global warming impact.
One quart (with a trigger sprayer) and one gallon containers are ideal
for surface and tool cleaning. Packaging is selected to be easily
recyclable. Labels made of recycled paper, and cartons made of 40%
recycled material.
™
Eco-Oven Cleaner is fully compliant with CARB (California Air
Resource Board) requirements.
Typical Product Data and Physical Properties
EXPOSURE LIMIT:
PHYSICAL STATE:
ODOR:
APPEARANCE:
pH:
PERCENT VOLATILE:
VAPOR PRESSURE:
BOILING POINT :
FLASHPOINT AND METHOD
(TAG Closed Cup):
SOLUBILITY IN WATER:
DENSITY:
VOC (by wt.):
Shelf life:
Manufacturer’s
recommendation 1000 ppm.
Liquid
Faint ethereal odor
Clear, mobile liquid
10-11
90% at 104°C
< 0.02 mmHg@20°C (VOC
Composite Vapor Pressure)
~212°F (100°C)
None
Fully miscible
1.00 at 25°C
2.2%, 21.8 g/l
5 years unopened
2 years open
Also compliant with European REACH (Registration, Evaluation,
Authorization & Restriction of Chemicals) and WEEE (Waste Electrical
and Electronic Equipment Directive) initiatives. It does not contain
RoHS (Restriction of Hazardous Substances) restricted substances,
SVHC (Substances of Very High Concern) list substances, nor halides.
Features / Benefits
•
•
•
•
•
•
•
Quickly Clean Flux Residue From Oven & Wave Fingers
Safe On Warm Ovens
NonFlammable
Biodegradable
Low VOC
Non-Ozone Depleting
Halide-Free – Prevents Ionic Contamination
Applications
•
For removal of baked-on flux residues from SMT oven and wave
solder equipment.
•
Recommended for usage in all brands of wave solder equipment.
•
Used for periodic preventive maintenance of SMT ovens and wave
solder equipment.
Avoid use on areas with aluminum, copper, brass, carbon steel, and
galvanized steel.
Application Suggestions
Oven cleaning
Reapply as necessary
Pallet cleaning
Let soak
Finger cleaning
Cycle wave with flux off to initially clean
thick residues
Defluxing
Need to rinse.
Read TDS for metal incompatibilities
•
800-858-4043 • www.techspray.com
Eco-Oven™ SMT Oven Cleaner
Product# 1573
(replaces 1691)
Directions
SMT Oven Cleaning
•
Allow oven to cool down slightly and apply on warm surface
(below 100°C).
•
Spray and saturate the soiled area. Let soak for 5 minutes.
•
Using a lint-free wipe (we recommend Techspray 2350-100 Wiper),
wipe lightly at first to allow cleaning agent to break down residues.
•
Continue to wipe in a circular motion until the flux residues are fully
removed.
•
Wipe completely with damp (w/water) cloth to remove remaining
residue.
•
Dispose of soiled wipe as appropriate depending on the type of residues
removed.
Wave Solder Finger Cleaning
•
Fill cleaner into finger cleaning reservoir.
•
Keep adequate liquid level.
Rev. A (12/17) Page 2 of 3
Compatibility
Metals
Test method: 24 hour submersion in sealed container.
Material
Brass foil
Copper foil
Nickel 200
Aluminum 6061
Aluminum 2024
Anodized aluminum
Stainless Steel 316
Stainless Steel 304
Mild carbon steel
Galvanized Steel
Compatibility
Not recommended
Incompatibility noted*
Excellent
Not recommended
Not recommended
Not recommended
Excellent
Excellent
Not recommended
Not recommended
Note: Eco-Oven™ is a water-based formula, so will encourage
oxidation with prolonged exposure to iron, steel, and other
susceptible metals.
Prolonged exposure can result in discoloration and/or metal loss.
Tests on copper coils of thermal transfer systems on reflow ovens
show minimal compatibility issues even after repeating 10-20 minute
soaking cycles weekly. Rinsing or blow drying with compressed air or
duster should be done to minimize exposure.
About TECHSPRAY RENEW™
TECHSPRAY RENEW
is a brand that represents
High Performance Eco-
Cleaning
TM
. Techspray
®
has applied our expertise in solvent cleaning to
formulate some of the most effective eco-friendly cleaners on the market.
Performance is our top priority, using the best “green” solutions as they
become available. We all are at the cusp of the ongoing movement toward
sustainable products, packaging, and processes. It is Techspray’s intention
to stay at the cutting-edge while keeping our products powerful and cost
effective.
TM
Environmental Policy
Techspray
®
is committed to developing products to ensure a safer
and cleaner environment. We will continue to meet and sustain the
regulations of all federal, state and local government agencies.
Performance
Tested according to modified MIL-PRF-29608 4.59 standards:
Fluxed coupons cured for 15 minutes at 212°F (100°C). Flux is applied to
cleaning coupons, cured, sprayed with cleaning fluid, allowed to sit 10-
seconds, then a poly-cellulose wipe (saturated with same cleaning fluid) is
dragged across one time using a dowel to maintain consistent pressure.
Percentage refers to the amount of soil (by weight) removed from stainless
steel test coupon.
R-100
Techspray Renew Eco-Oven
Cleaner 1573
99.8% IPA
Techspray Water-Based SMT
Oven Cleaner 1691
94%
96%
84%
No-Clean
59%
70%
26%
Water-
Soluble
96%
82%
73%
Resources
Techspray® products are supported by global sales, technical and
customer services resources.
For additional technical information on this product or other
Techspray® products in the United States, call the technical sales
department at 800-858-4043, email tsales@techspray.com or visit
our web site at: www.techspray.com.
Important Notice to Purchaser/User: The information in this
publication is based on tests that we believe are reliable. The results
may vary due to differences in tests type and conditions. We
recommend that each user evaluate the product to determine its
suitability for the intended application. Conditions of use are outside
our control and vary widely. Techspray’s only obligation and your
only solution is replacement of product that is shown to be defective
when you receive it. In no case will Techspray® be liable for any
special, incidental, or consequential damages based on breach of
warranty, negligence or any other theory.
800-858-4043 • www.techspray.com
Rev. A (12/17) Page 3 of 3
Eco-Oven™ SMT Oven Cleaner
Product# 1573
(replaces 1691)
Packaging and Availability
Eco-OVEN
TM
Cleaner available in the following sizes:
1573-QT
1 quart (0.95L) w/trigger sprayer
1573-G
1 gallon (3.8L)
Available as special order, call for pricing:
1573-5G
5 gallon (19L)
1573-54G
54 gallon (205L)
1573-275G
275 gallon (1,045L)
Note: TECHSPRAY RENEW
TM
Eco-Oven
TM
Cleaner is a direct
replacement for Techspray’s Water-Based SMT Oven Cleaner:
1573-QT
Cross from 1691-PT (pint)
1573-G
Cross from 1691-G (gallon)
North America
Techspray
8125 Cobb Center Drive
Kennesaw, GA 30152
800-858-4043
tsales@techspray.com
Europe
ITW Contamination Control BV
Saffierlaan 5, 2132 VZ Hoofddorp
The Netherlands
+31 88 1307 400
info@itw-cc.com
Countries outside the US
Call to locate a distributor in your
country
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
