https://www.phoenixcontact.com/us/products/2904090
Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
2-channel repeater power supply for operating 2-wire measuring transducers, input: 4…20 mA (powered), output:
4…20 mA (active), bidirectional transmission of digital HART communication signals, with push-in connection
The figure shows the version MACX
MCR-SL-RPSS-2I-2I
Key Commercial Data
Packing unit
Custom tariff number
Country of origin
1 STK
85437090
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
Height
Depth
12.5 mm
99 mm
114.5 mm
Ambient conditions
Ambient temperature (operation)
Ambient temperature (storage/transport)
Maximum altitude
Permissible humidity (operation)
Noise immunity
-20 °C ... 60 °C (Any mounting position)
-40 °C ... 80 °C
≤ 2000 m
10 % ... 95 % (non-condensing)
EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
09/06/2016 Page 1 / 6
https://www.phoenixcontact.com/us/products/2904090
Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090
Technical data
Ambient conditions
Degree of protection
IP20
Input data
Current input signal
Transmitter supply voltage
4 mA ... 20 mA
> 16 V (at 20 mA)
Output data
Signal output
Current output signal
Transmission Behavior
Load/output load current output
Output behavior in the event of an error
Current output
4 mA ... 20 mA (active)
1:1 to input signal
≤ 450 Ω (20 mA)
≤ 375 Ω (24 mA)
< 3.6 mA (In the event of cable break at the input (as per NE 43))
> 22.5 mA (In the event of cable short circuit at the input (as per NE 43))
Power supply
Nominal supply voltage
Supply voltage range
Max. current consumption
Power consumption
24 V DC
19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
< 100 mA (24 V / 20 mA)
< 1.4 W (at 24 V DC / 20 mA)
Connection data
Conductor cross section solid min.
Conductor cross section solid max.
Conductor cross section flexible min.
Conductor cross section flexible max.
Conductor cross section AWG min.
Conductor cross section AWG max.
Stripping length
Connection method
0.2 mm²
1.5 mm²
0.2 mm²
1.5 mm²
24
16
8 mm
Push-in connection
General
Maximum transmission error
Transmission error, typical
Maximum temperature coefficient
Step response (10-90%)
Status display
Flammability rating according to UL 94
Degree of pollution
Overvoltage category
< 0.1 % (of final value)
< 0.05 % (of final value)
< 0.01 %/K
< 1.3 ms (for 4 mA ... 20 mA step)
Green LED (supply voltage)
V0
2
II
09/06/2016 Page 2 / 6
https://www.phoenixcontact.com/us/products/2904090
Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090
Technical data
General
Electromagnetic compatibility
Interference emission
Housing material
Color
Designation
Electrical isolation
Conformance with EMC directive
EN 61000-6-4
PA 66-FR
green
Input/output, power supply
300 V
rms
(Rated insulation voltage (overvoltage category II; degree of
pollution 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
Designation
Electrical isolation
Designation
Electrical isolation
Designation
Electrical isolation
Conformance
ATEX
UL, USA/Canada
Input/output
375 V (Peak value in accordance with EN 60079-11)
Input/power supply
375 V (Peak value in accordance with EN 60079-11)
Output 1/output 2/ power supply
1.5 kV (50 Hz, 1 min., test voltage)
CE-compliant, additionally EN 61326
II 3 G Ex nA IIC T4 Gc X
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Data communication (bypass)
HART function
Protocols supported
Yes
HART
Standards and Regulations
Electromagnetic compatibility
Noise emission
Flammability rating according to UL 94
Conformance
ATEX
UL, USA/Canada
Conformance with EMC directive
EN 61000-6-4
V0
CE-compliant, additionally EN 61326
II 3 G Ex nA IIC T4 Gc X
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Classifications
eCl@ss
eCl@ss 4.0
27210120
09/06/2016 Page 3 / 6
https://www.phoenixcontact.com/us/products/2904090
Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090
Classifications
eCl@ss
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27210120
27210120
27210120
27210120
27210120
27210120
27210120
ETIM
ETIM 3.0
ETIM 4.0
ETIM 5.0
EC001485
EC002498
EC002653
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
UNSPSC 12.01
UNSPSC 13.2
30211506
39121008
39121008
39121008
39121008
Approvals
Approvals
Approvals
UL Listed / cUL Listed / Functional Safety / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
09/06/2016 Page 4 / 6
https://www.phoenixcontact.com/us/products/2904090
Signal isolator - MACX MCR-SL-RPSS-2I-2I-SP - 2904090
Approvals
cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
Functional Safety BVS Pb 04/13
cULus Listed
Accessories
Accessories
DIN rail connector
DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Power module
Power and error message module - MACX MCR-PTB - 2865625
Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GN DIN
rail connector
Power and error message module - MACX MCR-PTB-SP - 2924184
Power and fault signaling module with push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GN
DIN rail connector
09/06/2016 Page 5 / 6
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
