User Manual
ROM-DB5900 A2
Development Board for SMARC
v1.0 & V1.1 modules
Copyright
The documentation and the software included with this product are copyrighted 2016
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
ARM is trademarks of ARM Corporation.
Freescale is trademarks of Freescale Corporation.
Microsoft Windows are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1.
Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2.
Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3.
If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4.
Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5.
Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Part No. 2006B59001
Printed in Taiwan
ROM-DB5900 A2 User Manual
ii
Edition 1
May 2016
Declaration of Conformity
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warnings, Cautions and Notes
Warning!
Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution!
Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer's
instructions.
Note!
Notes provide optional additional information.
iii
ROM-DB5900 A2 User Manual
Packing List
Before installation, please ensure the following items have been shipped.
9696M59010E
9696ED2000E
1700021882-01
1700021883-01
1700021941-01
1700004711
1700019076
1700019077
1701100300
1700022840-01
1700022373-01
1700019474
2026M59000
SMARC v1.0 & V1.1 Carrier board ROM-DB5900 A2
debug adapter board
LVDS backlight cable
LVDS cable
SATA power
SATA signal
USB OTG to Type A female
USB OTG to Type A male
1
1
1
1
1
1
1
1
F Cable IDE#3 10P-2.54/D-SUB 9P(M) 30cm for UART and
2
CAN
SPDIF to RCA cable for audio in and out
Debug port cable for ROM-5420
A Cable D-SUB 9P(F)/D-SUB 9P(F) RS232/RS485 100c
China RoHS ROM-DB5900 A2 Electronic Pollution 1st
1
1
1
1
Optional Accessories
Part No.
96PSA-A36W12R1
170203183C
170203180A
1700008921
EWM-W142F01E
EWM-C106FT01E
1750007156-01
1750007050-01
1750000318
1750005865
9680015491
Description
Adapter 100-240V 36W 12V 3A
Power cord 3P EU 183cm
Power cord 3P UK 183cm
Power Cord 3P PSE 183cm
802.11 b/g/n, AR9287, 2T2R, Full size Mini PCIe
Cellular, HSUPA/WCDMA/GPRS,Full Mini PCIe
Cellular/GPS SMA Short JACK(9.5MM) L=100mm (3G Cable)
WiFi RP-SMA short SMA Jack(9.5mm) to U.FL_100mm (WiFi
Cable)
EMI Antenna 2DBI 2.4GHz SMA (WiFi Antenna)
Antenna L=10.9cm 500hm AN8921F-5701SM (3G Antenna)
PCIe to miniPCIe adapter card
SMARC CPU Boards
Part No.
ROM-5420CD-MDA1E
Description
Freescale i.mx6 Dual core 1GHz with 1GB memory (0~60° C)
ROM-5420WD-MDA1E Freescale i.mx6 Dual core 1GHz with 1GB memory (-40~85° C)
ROM-5420WQ-MEB1E Freescale i.mx6 Quad core 800MHz with 2GB memory (-40~85° C)
For more information please refer to "Advantech Baseboard Check List" and "Evalu-
ation Board Reference Schematic".
You can download "Advantech Baseboard Check List" and "Evaluation Board Refer-
ence Schematic" from http://com.advantech.com/
ROM-DB5900 A2 User Manual
iv
Safety Instructions
Read these safety instructions carefully.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4.
For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5.
Keep this equipment away from humidity.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7.
The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12.
Never pour any liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14.
If one of the following situations arises, get the equipment checked by service
personnel:
The
power cord or plug is damaged.
Liquid
has penetrated into the equipment.
The
equipment has been exposed to moisture.
The
equipment does not work well, or you cannot get it to work according to
the user's manual.
The
equipment has been dropped and damaged.
The
equipment has obvious signs of breakage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
1.
2.
3.
v
ROM-DB5900 A2 User Manual
电机控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
