P
r
o
d
u
c
t
B
u
l
l
e
t
i
184
9
n
ISODAMP™ C-6000 Series Materials
ISODAMP C-6000 series is a highly damped thermoplastic vulcanizate,
or TPV. It is available in 3 durometers in parts and assemblies
ISODAMP C-6000 Isolator parts and assemblies are used to enhance
performance and protect electronic and mechanical devices from
shock, vibration and noise.
ISODAMP C-6000 series parts are Halogen-free (per IEC 61249-2-21),
complies with REACH substances of very high concern free (as of
June 2015), meets JIG -101 and is RoHS 2 compliant
Typical Properties
Hardness,
ASTM D2240
(Type A, 15 sec, 1 kg, 23C (72F))
Compression Force Deflection kPa (psi)
ASTM D575 @ 0.51cm/min (0.2 in/min)
10%
20%
30%
Compression Set
ASTM D395, Method B
25% @ 22C (72F)
25% @ 70C (158F)
Abrasion
H22 wheels, 1000 cycles,
1000 grams load weight
ASTM D3390, weight loss per revolution (mg)
Tensile Strength kPa (psi)
ASTM D412
Tear C kN/m (ppi)
ASTM D624
Temperature Range C (F)
Peak Damping Performance
Temperature Range
@ 10 Hz
@ 100 Hz
@ 1000 Hz
Dynamic Properties via DMA , 20°C
Tan δ @ 10 Hz
Tan δ @ 100 Hz
Tan δ @ 1000 Hz
Flammability
UL 94 6mm Thickness
RoHS Compliant
C-6040
40
C-6050
50
C-6060
60
270 (39)
500 (73)
800 (120)
20%
50%
410 (59)
750 (110)
1200 (170)
20%
50%
580 (84)
1100 (150)
1600 (240)
25%
50%
0.6 mg
400
90
0.3 mg
550
110
0.5 mg
700
130
-19ºC to 14ºC
-15ºC to 26ºC
-10ºC to 38ºC
0.3
0.5
0.8
Meets V-0
Yes
-17ºC to 24ºC
-12ºC to 36ºC
-8ºC to 46ºC
0.3
0.5
0.8
Meets V-0
Yes
-12ºC to 29ºC
-8ºC to 38ºC
-3ºC to 48ºC
0.4
0.6
0.8
Meets V-0
Yes
The above technical information and data should be considered representative or typical only and should not be used for specification purposes.
Technical Information:
The technical information, recommendations and other statements contained in this document are based upon tests or experience that Aearo Technologies
believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use:
Many factors beyond Aearo Technologies’s control and uniquely within user’s knowledge and control can affect the use and performance of a Aearo Technologies product
in a particular application Given the variety of factors that can affect the use and performance of an Aearo Technologies product, user is solely responsible for evaluating the Aearo
Technologies product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy and Disclaimer:
Unless an additional warranty is specifically stated on the applicable Aearo Technologies product packaging or product literature, Aearo
Technologies warrants that each Aearo Technologies product meets the applicable Aearo Technologies product specification at the time Aearo Technologies ships the product. Aearo
Technologies MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. If the Aearo Technologies product does not conform to this warranty, then the sole and exclusive remedy is, at Aearo Technologies’s
option, replacement of the Aearo Technologies product or refund of the purchase price.
Limitation of Liability:
Except where prohibited by law, Aearo Technologies will not be liable for any loss or damage arising from the Aearo Technologies product, whether direct,
indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
