Avery Dennison® AD-740
Type A NFC RFID Inlay
Dimensions
Operating Frequency
RF Protocol
Chip
User Memory
UID/Serial Number
1.50 x 0.89 in [38 x 22.5 mm]
13.56 MHz
ISO-14443A
NXP Ultralight EV1
384 bits
7 byte
Common Applications
NFC Applications
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
PART NUMBER
Format
Antenna dimensions (CDxMD)
Die-cut dimensions
Inlay substrate material
Inlay-to-liner adhesive
Liner material
Face Sheet
Standard pitch
Standard web width
Total thickness over chip
Operating temperature
RoHS
Quality assurance
Un-wind direction
Core size with adaptor insert
Maximum roll outer diameter
(not to exceed)
Average # of units per roll
Rev
RF700071
Dry Inlay
1.50 x 0.89 in [38 x 22.5 mm]
N/A
PET
N/A
N/A
N/A
1.15 in (29.17 mm)
2.36 in (60 mm)
Nominal 200 um
-40º to 158 ºF (-40º to 70 ºC)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
Inlay-side Out
3 in (76.2 mm)
12.6 in (320 mm)
15,000 verified
00
RF700072
Pressure Sensitive Inlay
1.50 x 0.89 in [38 x 22.5 mm]
1.65 x 1.04 in [42 x 26.5 mm]
PET
General purpose permanent
hot melt
65 g Paper Liner
N/A
1.15 in (29.17 mm)
2.36 in (60 mm)
Nominal 290 um
-4º to 122 ºF (-20º to 50 ºC)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
Inlay-side Out
3 in (76.2mm)
7.48 in (190 mm)
4,000 verified
00
RF750028
Label
1.50 x 0.89 in [38 x 22.5 mm]
1.65 x 1.04 in [42 x 26.5 mm]
PET
General purpose permanent
hot melt
65 g Paper Liner
80 g Paper
1.15 in (29.17 mm)
2.36 in (60 mm)
Nominal 360 um
-4º to 122 ºF (-20º to 50 ºC)
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
Inlay-side Out
3 in (76.2 mm)
7.48 in (190 mm)
2,000 verified
00
Avery Dennison is pleased to introduce
AD-740,
an
NFC RFID
inlay optimized for a growing
number of RFID tagging applications requiring close range (near field) communication.
Care and handling:
RFID inlays are sensitive to ESD. Observe standard industry practices relating to
electronics/RFID to keep environmental impact and static charge to a minimum.
Applications:
This product should be tested by the customer/ user thoroughly under end use conditions
to ensure the product meets the particular requirements. Avery Dennison does not represent that this
product is fit for any particular purpose or use.
Warranty:
Please refer to Avery Dennison RFID standard terms and conditions.
Product Information:
Avery Dennison reserves the right to modify, change, supplement or discontinue
product offerings at any time without notice. The information contained herein is believed to be reliable but
Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Trademark statement:
Avery Dennison, S490 and Fasson are trademarks of Avery Dennison
Corporation. For the most recent information on Avery Dennison products, visit
www.rfid.averydennison.com.
© 2018 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
Third party trademarks and/or trade names used herein are the property of their respective owner(s).
Some of the trademarks appear for identification purposes only.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
