Spansion
®
Analog and Microcontroller
Products
The following document contains information on Spansion analog and microcontroller products. Although the
document is marked with the name “Fujitsu”, the company that originally developed the specification, Spansion
will continue to offer these products to new and existing customers.
Continuity of Specifications
There is no change to this document as a result of offering the device as a Spansion product. Any changes that
have been made are the result of normal document improvements and are noted in the document revision
summary, where supported. Future routine revisions will occur when appropriate, and changes will be noted in a
revision summary.
Continuity of Ordering Part Numbers
Spansion continues to support existing part numbers beginning with “MB”. To order these products, please use
only the Ordering Part Numbers listed in this document.
For More Information
Please contact your local sales office for additional information about Spansion memory, analog, and
microcontroller products and solutions.
FUJITSU SEMICONDUCTOR
DATA SHEET
DS706-00025-2v0-E
32-bit ARM
TM
Cortex
TM
-M3 based Microcontroller
MB9B510R Series
MB9BF512N/R, MB9BF514N/R,
MB9BF515N/R, MB9BF516N/R
DESCRIPTION
The MB9B510R Series are a highly integrated 32-bit microcontrollers dedicated for embedded controllers
with high-performance and competitive cost.
These series are based on the ARM Cortex-M3 Processor with on-chip Flash memory and SRAM, and has
peripheral functions such as Motor Control Timers, ADCs and Communication Interfaces (USB, CAN,
UART, CSIO, I
2
C, LIN).
The products which are described in this data sheet are placed into TYPE4 product categories in "FM3
Family PERIPHERAL MANUAL".
Note: ARM and Cortex are the trademarks of ARM Limited in the EU and other countries.
Copyright©2011-2012 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2012.6
MB9B510R Series
FEATURES
32-bit ARM Cortex-M3 Core
・
Processor version: r2p1
・
Up to 144MHz Frequency Operation
・
Memory Protection Unit (MPU): improves the reliability of an embedded system
・
Integrated Nested Vectored Interrupt Controller (NVIC): 1 NMI (non-maskable interrupt) and 48
peripheral interrupts and 16 priority levels
・
24-bit System timer (Sys Tick): System timer for OS task management
On-chip Memories
[Flash memory]
These series are based on two independent on-chip Flash memories.
・
MainFlash
・
Up to 512Kbyte
・
Built-in Flash Accelerator System with 16Kbyte trace buffer memory
・
The read access to Flash memory can be achieved without wait cycle up to operation frequency of
72MHz. Even at the operation frequency more than 72MHz, an equivalent access to Flash memory
can be obtained by Flash Accelerator System.
・
Security function for code protection
・
WorkFlash
・
32Kbyte
・
Read cycle
・
4wait-cycle: the operation frequency more than 72MHz
・
2wait-cycle: the operation frequency more than 40MHz, and to 72MHz
・
0wait-cycle: the operation frequency to 40MHz
・
Security function is shared with code protection
[SRAM]
This Series contain a total of up to 64Kbyte on-chip SRAM memories. This is composed of two
independent SRAM (SRAM0, SRAM1). SRAM0 is connected to I-code bus or D-code bus of Cortex-M3
core. SRAM1 is connected to System bus.
・
SRAM0: Up to 32 Kbyte.
・
SRAM1: Up to 32 Kbyte.
External Bus Interface
・
Supports SRAM, NOR and NAND Flash device
・
Up to 8 chip selects
・
8/16-bit Data width
・
Up to 25-bit Address bit
・
Supports Address/Data multiplex
・
Supports external RDY input
2
DS706-00025-2v0-E
MB9B510R Series
USB Interface
USB interface is composed of Function and Host.
[USB function]
・
USB2.0 Full-Speed supported
・
Max 6 EndPoint supported
・
EndPoint 0 is control transfer
・
EndPoint 1, 2 can be selected Bulk-transfer, Interrupt-transfer or Isochronous-transfer
・
EndPoint 3 to 5 can be selected Bulk-transfer or Interrupt-transfer
・
EndPoint 1 to 5 is comprised Double Buffer
[USB host]
・
USB2.0 Full/Low-speed supported
・
Bulk-transfer, interrupt-transfer and Isochronous-transfer support
・
USB Device connected/dis-connected automatically detect
・
IN/OUT token handshake packet automatically
・
Max 256-byte packet-length supported
・
Wake-up function supported
CAN Interface (Max 2channels)
・
Compatible with CAN Specification 2.0A/B
・
Maximum transfer rate: 1 Mbps
・
Built-in 32 message buffer
Multi-function Serial Interface (Max 8channels)
・
4 channels with 16-byte FIFO (ch.4 to ch.7), 4 channels without FIFO (ch.0 to ch.3)
・
Operation mode is selectable from the followings for each channel.
・
UART
・
CSIO
・
LIN
・
I
2
C
[UART]
・
Full-duplex double buffer
・
Selection with or without parity supported
・
Built-in dedicated baud rate generator
・
External clock available as a serial clock
・
Hardware Flow control : Automatically control the transmission by CTS/RTS (only ch.4)
・
Various error detect functions available (parity errors, framing errors, and overrun errors)
[CSIO]
・
Full-duplex double buffer
・
Built-in dedicated baud rate generator
・
Overrun error detect function available
[LIN]
・
LIN protocol Rev.2.1 supported
・
Full-duplex double buffer
・
Master/Slave mode supported
・
LIN break field generate (can be changed 13 to 16-bit length)
・
LIN break delimiter generate (can be changed 1 to 4-bit length)
・
Various error detect functions available (parity errors, framing errors, and overrun errors)
[I
2
C]
Standard mode (Max 100kbps) / High-speed mode (Max 400kbps) supported
DS706-00025-2v0-E
3
MB9B510R Series
DMA Controller (8channels)
DMA Controller has an independent bus for CPU, so CPU and DMA Controller can process simultaneously.
・
8 independently configured and operated channels
・
Transfer can be started by software or request from the built-in peripherals
・
Transfer address area: 32-bit (4Gbyte)
・
Transfer mode: Block transfer/Burst transfer/Demand transfer
・
Transfer data type: byte/half-word/word
・
Transfer block count: 1 to 16
・
Number of transfers: 1 to 65536
A/D Converter (Max 16channels)
[12-bit A/D Converter]
・
Successive Approximation Register type
・
Built-in 3unit
・
Conversion time: 1.0μs@5V
・
Priority conversion available (priority at 2levels)
・
Scanning conversion mode
・
Built-in FIFO for conversion data storage (for SCAN conversion: 16steps, for Priority conversion:
4steps)
Base Timer (Max 8channels)
Operation mode is selectable from the followings for each channel.
・
16-bit PWM timer
・
16-bit PPG timer
・
16/32-bit reload timer
・
16/32-bit PWC timer
General Purpose I/O Port
This series can use its pins as general purpose I/O ports when they are not used for external bus or
peripherals. Moreover, the port relocate function is built in. It can set which I/O port the peripheral function
can be allocated.
・
Capable of pull-up control per pin
・
Capable of reading pin level directly
・
Built-in the port relocate function
・
Up 103 fast general purpose I/O Ports@120pin Package
・
Some pin is 5V tolerant I/O.
See "PIN DESCRIPTION" to confirm the corresponding pins.
4
DS706-00025-2v0-E
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
