DATASHEET
HI-546, HI-547, HI-548, HI-549
Single 16 and 8, Differential 8-Channel and 4-Channel CMOS Analog MUXs with
Active Overvoltage Protection
The HI-546, HI-547, HI-548 and HI-549 are analog
multiplexers with active overvoltage protection and
guaranteed r
ON
matching. Analog input levels may greatly
exceed either power supply without damaging the device or
disturbing the signal path of other channels. Active
protection circuitry assures that signal fidelity is maintained
even under fault conditions that would destroy other
multiplexers.
Analog inputs can withstand constant 70V
P-P
levels with
15V
supplies. Digital inputs will also sustain continuous
faults up to 4V greater than either supply. In addition, signal
sources are protected from short circuiting should
multiplexer supply loss occur. Each input presents 1k of
resistance under this condition. These features make the
HI-546, HI-547, HI-548 and HI-549 ideal for use in systems
where the analog inputs originate from external equipment
or separately powered circuitry. All devices are fabricated
with 44V Dielectrically Isolated CMOS technology. The
HI-546 is a single 16-Channel, the HI-547 is an 8-Channel
differential, the HI-548 is a single 8-Channel and the HI-549
is a 4-Channel differential device. If input overvoltage
protection is not needed the HI-506/507/508/509
multiplexers are recommended. For further information see
Application Notes AN520 and AN521.
For MIL-STD-883 compliant parts, request the HI-546/883,
HI-547/883, HI-548/883 and HI-549/883 datasheets.
FN3150
Rev 7.00
Jun 15, 2016
Features
• Analog Overvoltage Protection. . . . . . . . . . . . . . . . . . 70V
P-P
• No Channel Interaction During Overvoltage
• Guaranteed r
ON
Matching
• Maximum Power Supply . . . . . . . . . . . . . . . . . . . . . . 44V
• Break-Before-Make Switching
• Analog Signal Range . . . . . . . . . . . . . . . . . . . . . . . .
15V
• Access Time (Typical) . . . . . . . . . . . . . . . . . . . . . . . 500ns
• Standby Power (Typical) . . . . . . . . . . . . . . . . . . . . 7.5mW
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Data Acquisition
• Industrial Controls
• Telemetry
FN3150 Rev 7.00
Jun 15, 2016
Page 1 of 25
HI-546, HI-547, HI-548, HI-549
Ordering Information
PART NUMBER
HI1-0546-2
HI3-0546-5Z (Note)
(No longer available, recommended
replacement: HI9P0546-9Z, HI4P0546-5Z)
HI4P0546-5Z (Note)
HI9P0546-9Z** (Note)
HI3-0547-5Z (Note)
HI4P0547-5Z (Note)
(No longer available, recommended
replacement: HI3-0547-5Z)
HI9P0547-9Z** (Note)
HI1-0548-2
HI3-0548-5Z (Note)
HI9P0548-5Z** (Note)
HI9P0548-9Z (Note)
HI1-0549-2
HI3-0549-5
(No longer available or supported)
HI3-0549-5Z (Note)
HI4P0549-5Z (Note)
(No longer available or supported)
HI9P0549-9Z (Note)
PART MARKING
HI1-546-2
HI3-546-5Z
HI4P546-5Z
HI9P546-9Z
HI3-0547-5Z
HI4P547-5Z
HI9P547-9Z
HI1-548-2
HI3-548-5Z
HI9P548-5Z
HI9P548-9Z
HI1-549-2
HI3-549-5
HI3-549-5Z
HI4P549-5Z
HI9P549-9Z
TEMP.
RANGE (
o
C)
-55 to 125
0 to 75
0 to 75
-40 to 85
0 to 75
0 to 75
-40 to 85
-55 to 125
0 to 75
0 to 75
-40 to 85
-55 to 125
0 to 75
0 to 75
0 to 75
-40 to 85
PACKAGE
28 Ld CERDIP
28 Ld PDIP* (Pb-free)
28 Ld PLCC (Pb-free)
28 Ld SOIC (Pb-free)
28 Ld PDIP* (Pb-free)
28 Ld PLCC (Pb-free)
28 Ld SOIC (Pb-free)
16 Ld CERDIP
PKG. DWG. #
F28.6
E28.6
N28.45
M28.3
E28.6
N28.45
M28.3
F16.3
16 LEAD PDIP (Pb-Free) E16.3
16 Ld SOIC (Pb-free)
16 Ld SOIC (Pb-free)
16 Ld CERDIP
16 Ld PDIP
16 Ld PDIP
(Pb-Free
20 Ld PLCC (Pb-free)
16 Ld SOIC (Pb-free)
M16.15
M16.15
F16.3
E16.3
E16.3
N20.35
M16.15
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
**Add “96” suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Pinouts
HI-546 (CERDIP, PDIP, SOIC)
TOP VIEW
+V
SUPPLY
1
NC 2
NC 3
IN 16 4
IN 15 5
IN 14 6
IN 13 7
IN 12 8
IN 11 9
IN 10 10
IN 9 11
GND 12
V
REF
13
ADDRESS A
3
14
28 OUT
27 -V
SUPPLY
26 IN 8
25 IN 7
24 IN 6
23 IN 5
22 IN 4
21 IN 3
20 IN 2
19 IN 1
18 ENABLE
17 ADDRESS A
0
16 ADDRESS A
1
15 ADDRESS A
2
HI-547 (CERDIP, PDIP, SOIC)
TOP VIEW
+V
SUPPLY
1
OUT B 2
NC 3
IN 8B 4
IN 7B 5
IN 6B 6
IN 5B 7
IN 4B 8
IN 3B 9
IN 2B 10
IN 1B 11
GND 12
V
REF
13
NC 14
28 OUT A
27 -V
SUPPLY
26 IN 8A
25 IN 7A
24 IN 6A
23 IN 5A
22 IN 4A
21 IN 3A
20 IN 2A
19 IN 1A
18 ENABLE
17 ADDRESS A
0
16 ADDRESS A
1
15 ADDRESS A
2
FN3150 Rev 7.00
Jun 15, 2016
Page 2 of 25
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
