HMC601LP4
/
601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
Typical Applications
The HMC601LP4(E) is ideal for IF and RF
applications in:
• Cellular/PCS/3G
• WiMAX, WiBro & Fixed Wireless
• Power Monitoring & Control Circuitry
• Receiver Signal Strength Indication (RSSI)
• Automatic Gain & Power Control Circuits
Features
Wide Dynamic Range: up to 75 dB
Fast Pulse Response: 15/34ns (Rise/Fall Time)
Flexible Supply Voltage: +2.7V to +5.5V
Power-Down Mode
Excellent Stability over Temperature
Compact 4x4mm Leadless SMT Package
12
POWER DETECTORS - SMT
Functional Diagram
General Description
The HMC601LP4(E) Logarithmic Detector/Controller
converts RF signals at its input, to a proportional DC
voltage at its output. The HMC601LP4(E) employ
a successive compression topology which delivers
extremely high dynamic range and conversion
accuracy over a wide input frequency range. As
the input power is increased, successive amplifiers
move into saturation one by one creating an accurate
approximation of the logarithm function. The output of
a series of square law detectors is summed, converted
into voltage domain and buffered to drive the LOGOUT
output. For detection mode, the LOGOUT pin is
shorted to the VSET input, and will provide a nominal
logarithmic slope of 19mV/dB and an intercept of
-100dBm. The HMC601LP4(E) can also be used in the
controller mode where an external voltage is applied to
the VSET pin, to create an AGC or APC feedback loop.
The HMC601LP4(E) provides a 15/34ns (rise/fall time)
response time enabling RF burst detection to a pulse
rate beyond 20 MHz.
Electrical Specifi cations,
T
A
= +25C, PWD = 0V, Vcc1, Vcc2 = +3.3V
[1]
Parameter
Input Frequency
±3 dB Dynamic Range
±3 dB Dynamic Range Center
±1 dB Dynamic Range
Output Slope
Output Intercept
Temperature Sensitivity @ -10 dBm Input
[2]
Typ.
50
74
-31
68
19.5
-99
-4.2
Typ.
100
74
-31
68
19.4
-99
-3.8
Typ.
500
74
-31
69
19.2
-100
-3.5
Typ.
900
74
-31
69
19.1
-100
-2.4
Typ.
1900
70
-31.5
67
19.0
-98
-0.8
Typ.
2500
68
-31.5
65
19.4
-96
-0.8
Typ.
3500
54
-27
47
20.9
-85
-4.4
Typ.
4000
52
-23
46
19.6
-79
-3.5
Units
MHz
dB
dBm
dB
mV/dB
dBm
mdB/°C
[1] Detector mode measurements; LOGOUT (Pin 17) is shorted to VSET (Pin 16).
[2] Measured from T
A
= -40C to T
A
= +85C
Parameter
RF Input (INP)
Return Loss
LOGOUT Interface
Open Loop Impedance
(Simulated)
12
kΩ
F = 10 - 4000 MHz, Zo = 50Ω, See plot
10
dB
Conditions
Min.
Typ.
Max.
Units
12 - 10
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
MA 02062-9106
One Technology Way, P.O. Box 9106, Norwood,
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application
Order On-line at www.hittite.com
Support: Phone: 1-800-ANALOG-D
HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
Electrical Specifi cations,
(continued)
Parameter
Current Drive (Source)
Current Drive (Sink)
Output Voltage Range
Small Signal Response Time (10% to 90%)
Large Signal Response Time (±0.5 dB Settling)
Output Rise Time
Ripple
VSET Interface
Input Impedance
Input Voltage Range
Low Frequency Gain
Open Loop Corner Frequency
Power Down (PWD) Interface
Voltage Range for Normal Mode
Voltage Range for Shutdown Mode
Threshold Voltage
Power-up Response Time
Power-Down Response Time
Power Supply (Vcc1, Vcc2)
Operating Voltage Range
Supply Current in Normal Mode
Supply Current in Power Down Mode
Vcc = +3.3V, PWD = 0V
Vcc = +3.3V, PWD = Vcc
2.7
30
1
5.5
36
V
mA
mA
50% PWD to ±0.5 dB Settling of LOGOUT
50% PWD to 10% Icc
0
0.8 x Vcc
Vcc/2
19.9
2.2
0.2 x Vcc
Vcc
V
V
V
μs
μs
VSET to LOGOUT
30
0.6 to 1.9
75
4.4
kΩ
V
dB
kHz
Pin = -60 to -57 dBm
Pin = No Signal to 0 dBm
From 0% to 90%
Fin = 100 MHz
For 1% change in the output voltage
0
8
50
15
<4
Conditions
Min.
Typ.
0.55
4.8
Vcc -0.13
Max.
Units
mA
mA
V
ns
ns
ns
mVpp
12
POWER DETECTORS - SMT
ERROR (dB)
Test Conditions
Parameter
Vcc1, Vcc2
Input Zo
T
A
Fin
Condition
+3.3V
50Ω
+25C
900 MHz
INN Port connected to ground through a 1000pF capacitor
LOGOUT Voltage & Error
vs. Input Power, Fin = 10 MHz
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT Voltage & Error
vs. Input Power, Fin = 50 MHz
5
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
5
1.6
LOGOUT (V)
3
LOGOUT (V)
1.6
3
ERROR (dB)
1.2
1
1.2
1
0.8
-1
0.8
-1
0.4
ERR +25C
ERR +85C
ERR -40C
-3
0.4
ERR +25C
ERR +85C
ERR -40C
-3
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
INPUT POWER (dBm)
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
MA 02062-9106
One Technology Way, P.O. Box 9106, Norwood,
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application
Order On-line at www.hittite.com
Support: Phone: 1-800-ANALOG-D
12 - 11
HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 100 MHz
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT Voltage & Error
vs. Input Power, Fin = 500 MHz
5
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
5
1.6
LOGOUT (V)
3
LOGOUT (V)
1.6
3
ERROR (dB)
ERROR (dB)
1.2
1
1.2
1
0.8
-1
0.8
-1
0.4
12
POWER DETECTORS - SMT
ERR +25C
ERR +85C
ERR -40C
-3
0.4
ERR +25C
ERR +85C
ERR -40C
-3
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
INPUT POWER (dBm)
INPUT POWER (dBm)
LOGOUT Voltage & Error
vs. Input Power, Fin = 900 MHz
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT Voltage & Error
vs. Input Power, Fin = 1900 MHz
5
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
5
1.6
LOGOUT (V)
3
LOGOUT (V)
1.6
3
ERROR (dB)
ERROR (dB)
1.2
1
1.2
1
0.8
-1
0.8
-1
0.4
ERR +25C
ERR +85C
ERR -40C
-3
0.4
ERR +25C
ERR +85C
ERR -40C
-3
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
INPUT POWER (dBm)
INPUT POWER (dBm)
LOGOUT Voltage & Error
vs. Input Power, Fin = 2500 MHz
2
IDEAL
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT Voltage & Error
vs. Input Power, Fin = 3500 MHz
5
2
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
5
1.6
LOGOUT (V)
3
1.6
LOGOUT (V)
3
ERROR (dB)
1.2
1
ERROR (dB)
1.2
1
0.8
ERR +25C
ERR +85C
ERR -40C
-1
0.8
-1
0.4
-3
0.4
IDEAL
ERR +25C
ERR +85C
ERR -40C
-3
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
0
-5
-55
-45
-35
-25
-15
-5
5
-75
-65
INPUT POWER (dBm)
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 12
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
MA 02062-9106
One Technology Way, P.O. Box 9106, Norwood,
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application
Order On-line at www.hittite.com
Support: Phone: 1-800-ANALOG-D
HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 4000 MHz
2
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT Slope vs. Frequency, Vcc = 3.3V
5
24
23
SLOPE (mV/dB)
22
21
20
19
18
500
+25 C
+85 C
-40 C
1.6
LOGOUT (V)
3
ERROR (dB)
1.2
1
0.8
-1
0.4
IDEAL
ERR +25C
ERR +85C
ERR -40C
-3
0
-75
-65
-55
-45
-35
-25
-15
-5
5
-5
1000
1500
2000
2500
3000
3500
4000
12
POWER DETECTORS - SMT
12 - 13
INPUT POWER (dBm)
FREQUENCY (MHz)
LOGOUT Slope
vs. Supply Voltage, T
A
= +25C
25
24
SLOPE (mV/dB)
23
22
21
20
19
18
2.5
500 MHz
900 MHz
1900 MHz
2500 MHz
3500 MHz
4000 MHz
LOGOUT Intercept
vs. Frequency, Vcc = 3.3V
-60
+25 C
+85 C
-40 C
-70
INTERCEPT (dBm)
-80
-90
-100
3
3.5
4
Vcc (Volts)
4.5
5
5.5
-110
500
1000
1500
2000
2500
3000
3500
4000
FREQUENCY (MHz)
LOGOUT Intercept
vs. Supply Voltage T
A
= +25C
-50
-60
INTERCEPT (dBm)
-70
-80
-90
500 MHz
900 MHz
900 MHz
1900 MHz
2500 MHz
3500 MHz
4000 MHz
LOGOUT Error vs. Input Power,
Normalized
[2]
, Fin = 1900 MHz
2
RELATIVE ERROR TO 27C (dB)
1
+85 C
-40 C
0
-1
-100
-110
2.5
3
3.5
4
Vcc (VOLTS)
4.5
5
5.5
-2
-75
-65
-55
-45
-35
-25
-15
-5
5
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
MA 02062-9106
One Technology Way, P.O. Box 9106, Norwood,
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application
Order On-line at www.hittite.com
Support: Phone: 1-800-ANALOG-D
HMC601LP4 / 601LP4E
v01.0509
75 dB, FAST SETTLING, LOGARITHMIC
DETECTOR / CONTROLLER 10 - 4000 MHz
Input Return Loss vs. Frequency
0
INPUT RETURN LOSS (dB)
-5
-10
-15
-20
-25
-30
+25 C
+85 C
-40 C
LOGOUT Voltage
vs. Input Power & Frequency, T
A
= +25C
2.4
50 MHz
900 MHz
1900 MHz
3500 MHz
4000 MHz
1.9
LOGOUT (V)
1.4
0.9
12
POWER DETECTORS - SMT
-35
0
1
2
3
4
5
FREQUENCY (GHz)
0.4
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Absolute Maximum Ratings
Vcc1, Vcc2
PWD
VSET Input Voltage
LOGOUT Output Current
RF Input Power
Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 7.95 mW/°C above 85°C)
Thermal Resistance (R
th
)
(junction to lead)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
0V to +5.5V
0V to +5.5V
0V to +5.5V
3 mA
+12 dBm
125 °C
0.32 Watts
126 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
[1] Unless otherwise noted: Vcc1, Vcc2 = +3.3V, TA = +25C
[2] This data is relative to the room temperature
performance of the HMC601LP4
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 14
For price, delivery, and to place orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
MA 02062-9106
One Technology Way, P.O. Box 9106, Norwood,
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Phone: 781-329-4700 • Order online at www.analog.com
Application
Order On-line at www.hittite.com
Support: Phone: 1-800-ANALOG-D
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
