REVISION BS
DO NOT
SCALE FROM
THIS PRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
(No OF POS x 0.800 [.0315]) + 4.600 [.1811] 1.126
(No OF POS x 0.800 [.0315]) + 1.400[.0551] REF
C
HSEC8-1XXX-XX-XX-DV-X-XX
No OF POSITIONS (PER ROW)
-10, -20, -30 (SEE FIG 1)
■-09, -13, -25, -37, -49, -40, -50, -60, -70,
-80, -90, -100 (SEE FIG 2, SHT 2)
CARD THICKNESS
(SEE TABLE 9, SHT 3)
-01: 1.57 [.062] CARD
-03: 2.36 [.093] CARD
(10-100 POS, MULTIPLES OF 10 ONLY)
(-K & -TR ONLY FOR OPTION 2)
(USE RHSEC8-XXX-03-DV-XX)
(SEE NOTE 7 & 10)
OPTION 2
**-PE: PASS THROUGH (SHT 7, FIG 7)
(10, 13, & 20 POS ONLY)
(-A OPTION ONLY)
(NOT AVAILABLE WITH ANY OTHER OPTION
2, EXCEPT -K AND/OR -TR)
**-BL: BOARD LOCK (SHT 5, FIG 5) (SEE NOTE 11)
(-A OPTION ONLY)
**-GR: GUIDE RAILS (SHT 6, FIG 6)
(10-60 POS, MULTIPLES OF 10 ONLY)
(SEE NOTE 11)(-TR PACKAGING ONLY)
-WT: WELD TAB (SHT 7, FIG 8)
(-A OPTION ONLY)
**-L: LATCHING (SHT 4, FIG 4)
(13, 25, 37, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
**-L2: ECDP LATCHING (SHT 8, FIG 9)
(09, 13, 25, & 49 POS ONLY) (SEE NOTE 11)
(-A OPTION ONLY)
-K: POLYIMIDE FILM PAD (SEE SHT 2, FIG 3)
-TR: TAPE & REEL
(09 THRU 70 POS ONLY)
(LEAVE BLANK FOR TRAY)
OPTION 1
(LEAVE BLANK FOR NO ALIGNMENT PIN,
USE XHSEC8-XXX-01-DV-LC, NOT
AVAILABLE FOR CARD THICKNESS -02 & -03
SEE FIG 10, SHT 3)
-A: ALIGNMENT PIN
(USE XHSEC8X-XXX-XX-DV-A)
(No OF POS -1 ) x 0.800 [.0315]±0.100
2.70 .106
REF
02
C
0.800±0.100 .0315±.0039
(TOL NON ACCUM)
C
L
60
"A"
PLATING SPECIFICATION
-SM: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
◆
"T"' REF
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" GOLD TAIL)
-S: 30µ" SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
ROW SPECIFICATION
-DV: DOUBLE VERTICAL
◆
P" REF
"Q" REF
◆
01
POSITION #1
INDICATOR
C
L
XHSEC8X-XXX-XX-DV-XX
◆
"A"
59
7.80 .307
REF
1.32 .052 REF
(2 PLCS)
C
** = AVAILABLE ONLY WITH -01 CARD THICKNESS
■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT, & -L2
(SOME FEATURES NOT
SHOWN FOR CLARITY)
SEE NOTE 12
"V"
-0.26[.010]
◆
"W" REF
◆
+0.09[.004]
3.60 .142
REF
1.50 .059
REF
1.12 .044 REF (TYP)
(No OF POS x 0.800[.0315]) + 2.200[.0866] REF
C-188-XX-XX
◆
2.92 .115
REF
C
L
SEE TABLE 1
C
C
C
3.03 .119
REF
7.98±0.15 .314±.006 (TYP)
0.800±0.100 .0315±.0039
(TOL NON ACCUM)
C
L
"Y" 0.20[.008]
◆
C
((No OF POS -1 ) x 0.800 [.0315])±0.08
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
(SEE NOTE 12)
3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS.
4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP.
5. ASSEMBLIES TO BE PACKAGED IN TRAYS, UNLESS -TR IS SPECIFIED.
6. NOTE DELETED.
7.
MATING EDGE CARD THICKNESS TOLERANCE TO BE ±0.15 [.006] OF NOMINAL.
8. NOTE DELETED.
9. NOTE DELETED.
10.
MATING CARD MUST HAVE LEAD-IN. SEE SAMTEC FOOTPRINT FOR SPECIFICATIONS.
11. L, L2, & BL IS NOT APPLICABLE FOR GUIDE RAIL TYPE USE. GR NOT APPLICABLE FOR L,
L2, OR BL TYPE USE.
12. CORNER VOIDS AT VENDOR DISCRETION, AND MAY OR MAY NOT BE PRESENT.
13. MEASURE DIMENSION WITH LATCH IN LOCKED, PERPENDICULAR POSITION.
14. VOID WIDTH, LOCATION, AND FREQUENCY TO BE AT VENDORS DISCRETION.
FIG 1
FOR POSITIONS -10, -20 & -30
HSEC8-130-01-XX-DV-A SHOWN
(SOME FEATURES NOT SHOWN FOR CLARITY)
◆
=(SEE TABLE 9, SHT 3)
SECTION "A"-"A"
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
.X: .3 [.01]
2
.XX: .13 [.005]
.XXX: .051 [.0020]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
INSULATOR: LCP,
COLOR: -01
CARD THICKNESS
BLACK,
-02 & -03
CARD THICKNESS
NATURAL
CONTACT: BeCu
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
HSEC8-1XXX-XX-XX-DV-X-XX
BRATCHER 01/24/03
SHEET
1
OF
8
BY:
REVISION BS
FIG 3
-K OPTION
(SOME FEATURES NOT SHOWN FOR CLARITY)
8.11 .319
(No OF POS x 0.800[.0315]) + 7.800[.3071] REF
"D" REF
"R"
C
2.70 .106
REF
"S"
"G" REF
120
"K"
"H" 0.51 .020
K-DOT-.XXX-.XXX-.XXX
02
"A" REF
01
4.00 .157
"B" SPACES @ .800 = "C"±0.100
C
C
C
119
(No OF POS + 3) x 0.800[.0315]±0.100
((No OF POS + 6) x 0.800[.0315]) + 0.600[.0236] REF
C
C
L
C
13.83±0.15 .545±.006
[(No OF POS + 3) x 0.800[.0315] 0.100
"U" 0.13
FIG 2
FOR POSITIONS ■ **-09, **-13, **-25, **-37,
-40, **-49, -50, -60, -70, -80, -90, -100
HSEC8-160-01-XX-DV-A SHOWN
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** =
AVAILABLE ONLY WITH
-01 CARD THICKNESS)
■
*
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
IN-PROCESS
*
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
SHEET SCALE: 2.25:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT & -L2
HSEC8-1XXX-XX-XX-DV-X-XX
BRATCHER 01/24/03
SHEET
2
OF
8
BY:
REVISION BS
0.635 .025 MAX
C
3 MAX SWAY
(TYP)
C
L
7.80 .307
REF
C-188-XXX-X IN-PROCESS VIEW
FIG 10
**NON-ALIGNMENT PIN OPTION
HSEC8-130-01-XX-DV SHOWN
(
DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
DESCRIPTION:
DWG. NO.
SHEET SCALE: 2:1
HSEC8-1XXX-XX-XX-DV-X-XX
BY:
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BRATCHER 01/24/03
SHEET
3
OF
8
REVISION BS
(No OF POS x 0.80[.0315]) + 18.40[.724] REF
"D"
"C"
"C"
"D"
RHSEC8-XXX-01-DV-XX-L
WT-25-02-T
C
C-188-02-X
C
1.59 .063
(No OF POS x 0.80[.0315]) + 14.90[.587]
2 MAX SWAY
(EITHER DIRECTION)
0.25 .010 REF
0.64 .025 REF
SECTION "C"-"C"
SECTION "D"-"D"
FIG 4
**-L: LATCHING OPTION
HSEC8-137-01-XX-DV-A-L SHOWN
AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY
(NOT AVAILABLE FOR -GR TYPE USE)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
SHEET SCALE: 3:1
HSEC8-1XXX-XX-XX-DV-X-XX
BY:
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
BRATCHER 01/24/03
SHEET
4
OF
8
REVISION BS
"E" REF
"H"
"F"
"E"
"E"
"H"
"F"
C
1.325 .0522
RHSEC8-XXX-01-DV-XX-BL
LTC-04
12.20 .480
REF
2.1±0.40 .083±.016
（SEE NOTE 13)
WT-25-02-T
1.48 .058
0.25 .010
REF (TYP)
C
C
C-188-02-X
"F"
2 MAX SWAY
(EITHER DIRECTION)
0.64 .025
REF
SECTION "E"-"E"
SECTION "H"-"H"
FIG 5
**-BL: BOARD LOCK OPTION
HSEC8-160-01-XX-DV-A-BL SHOWN
(NOT AVAILABLE FOR -GR TYPE USE)
(FOR -09, -13, -25, 37, -40, -49, -50, -60, -70, -80, -90 & -100
POSITIONS DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
(FOR -10, -20 & -30 POSITIONS DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
(** = AVAILABLE ONLY WITH -01 CARD THICKNESS)
(SOME FEATURES NOT SHOWN FOR CLARITY)
(AVAILABLE IN ALL POSITIONS)
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
SECTION "F"-"F"
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
0.8mm HIGH SPEED EDGE CARD ASSEMBLY
SHEET SCALE: 2.5:1
HSEC8-1XXX-XX-XX-DV-X-XX
BY:
BRATCHER 01/24/03
SHEET
5
OF
8
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
