CM1401-03
4-Channel ESD/EMI Filter Array plus
4-Channel ESD Array for USB
Features
•
•
•
•
•
•
•
•
•
•
Functionally and pin compatible with CSPEMI307A
device
Optiguard
TM
coated for improved reliability at
assembly
Four channels of combined EMI/RFI filtering +
ESD protection
Four additional channels of ESD-only protection
40dB absolute attenuation (typical) at 1 GHz
35dB attenuation (typical) at 1 GHz relative to pass
band
+
15kV ESD protection on all channels
(IEC 61000-4-2 Level 4, contact discharge)
+
30kV ESD protection on all channels (HBM)
15-bump, 2.960mm X 1.330mm footprint
Chip Scale Package (CSP)
Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
Lead-free version available
Product Description
The CM1401-03 is a multichannel array with four low-
pass filter + ESD channels and four ESD-only chan-
nels. They reduce EMI/RFI emissions on a data port
and protect against ESD on a USB port. Each EMI/RFI
channel integrates a high quality pi-style filter (C-R-C)
which provides greater than 30dB attenuation in the
800-2700 MHz range relative to the pass band attenu-
ation. These pi-style filters are bidirectional, controlling
EMI both to and from a data port connector.
The CM1401-03 provides a high-level of ESD protec-
tion on all eight channels for sensitive electronic com-
ponents that may be subjected to electrostatic
discharge (ESD). The input pins are designed and
characterized to safely dissipate ESD strikes of 15kV,
exceeding the maximum requirement of the IEC
61000-4-2 international standard. Using the MIL-STD-
883 (Method 3015) specification for Human Body
Model (HBM) ESD, the device provides protection for
contact discharges to greater than 30kV.
The CM1401-03 is particularly well suited for portable
electronics (e.g., cellular telephones, PDAs, notebook
computers) because of its small package footprint and
low weight.
The CM1401-03 incorporates Optiguard
TM
coating
which results in improved reliability at assembly and is
available in a space-saving, low-profile chip scale
package with optional lead-free finishing.
•
Applications
•
•
•
•
•
•
•
EMI filtering and ESD protection for both data and
I/O ports
Outer 4 channels provide ESD protection for
USB lines and other I/O port applications
Wireless Handsets
Handheld PCs / PDAs
MP3 Players
Notebooks
Desktop PCs
Electrical Schematic
100Ω
FILTER+ESDn*
30pF
30pF
FILTER+ESDn*
ESDn*
30pF
GND
(Pins B1-B3)
1 of 4 EMI/RFI + ESD Channels.
* See Package/Pinout Diagram for expanded pin information
1 of 4 ESD-only Channels
© 2004 California Micro Devices Corp. All rights reserved.
02/13/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
1
CM1401-03
PACKAGE / PINOUT DIAGRAMS
TOP VIEW
Orientation
Marking
(see note 2)
BOTTOM VIEW
(Bumps Up View)
(Bumps Down View)
1
A
B
C
2
3
4
5
6
ESD_3
FILTER/ESD_2
FILTER/ESD_4
C1
C2
FILTER/ESD_1
C3
GND
C4
FILTER/ESD_3
C5
GND
C6
ESD_4
N013
Orientation
Marking
GND
ESD_1
B1
A2
FILTER/ESD_1
B2
A4
FILTER/ESD_3
B3
A6
ESD_2
FILTER/ESD_2
FILTER/ESD_4
A1
A1
A3
A5
Notes:
CSP Package
1) These drawings are not to scale.
2) Lead-free devices are specified by using a "+" character for the top side orientation mark.
CM1401-03
PIN DESCRIPTIONS
PIN(s)
A1
A2
A3
A4
A5
A6
B1-B3
C1
C2
C3
C4
C5
C6
NAME
ESD_1
FILTER+ESD_1
FILTER+ESD_2
FILTER+ESD_3
FILTER+ESD_4
ESD_2
GND
ESD_3
FILTER+ESD_1
FILTER+ESD_2
FILTER+ESD_3
FILTER+ESD_4
ESD_4
DESCRIPTION
ESD Channel 1
Filter + ESD Channel 1
Filter + ESD Channel 2
Filter + ESD Channel 3
Filter + ESD Channel 4
ESD Channel 2
Device Ground
ESD Channel 3
Filter + ESD Channel 1
Filter + ESD Channel 2
Filter + ESD Channel 3
Filter + ESD Channel 4
ESD Channel 4
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Ordering Part
Pins
15
Package
CSP
Number
1
CM1401-03CS
Part Marking
N013
Lead-free Finish
2
Ordering Part
Number
1
CM1401-03CP
Part Marking
N013
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Note 2: Lead-free devices are specified by using a "+" character for the top side orientation mark.
© 2004 California Micro Devices Corp. All rights reserved.
2
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
02/13/04
CM1401-03
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature Range
DC Power per Resistor
DC Package Power Rating
RATING
-65 to +150
100
600
UNITS
°C
mW
mW
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
RATING
-40 to +85
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS
(SEE NOTE1)
SYMBOL
R
C
TCR
TCC
V
DIODE
I
LEAK
V
SIG
PARAMETER
Resistance
Capacitance
Temperature Coefficient of Resistance
Temperature Coefficient of Capacitance
Diode Voltage (reverse bias)
Diode Leakage Current (reverse bias)
Signal Voltage
Positive Clamp
Negative Clamp
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
b) Contact Discharge per IEC 61000-4-2
Level 4
Clamping Voltage during ESD Discharge
MIL-STD-883 (Method 3015), 8kV
Positive Transients
Negative Transients
Cut-off Frequency
Z
SOURCE
=50Ω, Z
LOAD
=50Ω
At 2.5V DC
I
DIODE
=10µA
V
DIODE
=3.3V
I
LOAD
= 10mA
5.6
-0.4
Notes 2,4 and 5
±30
±15
Notes 2,3,4 and 5
+10
-5
R=100Ω , C=30pF
58
MHz
V
V
kV
kV
6.8
-0.8
9.0
-1.5
V
V
5.5
100
At 2.5V DC
CONDITIONS
MIN
80
24
TYP
100
30
1200
-300
MAX
120
36
UNITS
Ω
pF
ppm/°C
ppm/°C
V
nA
V
ESD
V
CL
f
C
Note 1: T
A
=25
°
C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A2,
then clamping voltage is measured at Pin C2.
Note 4: Unused pins are left open
Note 5: These parameters are guaranteed by design and characterization.
© 2004 California Micro Devices Corp. All rights reserved.
02/13/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
3
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
