https://www.phoenixcontact.com/us/products/1437520
Bus system flush-type socket - SACCBP-FS-5CON-
PG9/0,5-920SCO - 1437520
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Bus system flush-type socket, DeviceNet/CANopen, 5-pos., M12, shielded, A-coded, Speedcon, rear/screw
mounting with Pg9 thread, with 0.5 m bus cable, 2 x 0.2 mm²; 2 x 0.32 mm²
Why buy this product
Pre-assembled with cables in various standard lengths for immediate use
Customer-specific assemblies and cable lengths can be supplied
Sealed on the cable side for optimum tightness of seal
Cable designs for all common networks and fieldbuses
For high transmission safety: shield connection to the housing with optional EMC nut
Key Commercial Data
Packing unit
Custom tariff number
Country of origin
1 STK
85444290
Germany
Technical data
Dimensions
Length of cable
0.5 m
Ambient conditions
Ambient temperature (operation)
Degree of protection
-25 °C ... 85 °C (Plug / socket)
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
10/12/2016 Page 1 / 7
https://www.phoenixcontact.com/us/products/1437520
Bus system flush-type socket - SACCBP-FS-5CON-
PG9/0,5-920SCO - 1437520
Technical data
General
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C
Rated voltage
Rated surge voltage
Number of positions
Insulation resistance
Coding
Standards/regulations
Signal type/category
Overvoltage category
Degree of pollution
Insertion/withdrawal cycles
Torque
2A
60 V
1.5 kV
5
≥ 100 MΩ
A - standard
M12 connector IEC 61076-2-101
DeviceNet™
II
3
> 100
2 Nm ... 3 Nm (Installation-side)
Material
Flammability rating according to UL 94
Contact material
Contact surface material
Contact carrier material
Material, knurls
Sealing material
V0
CuZn
Ni/Au
PA 66
Zinc die-cast, nickel-plated
FKM
Standards and Regulations
Standard designation
Standards/regulations
Flammability rating according to UL 94
M12 connector
IEC 61076-2-101
V0
Cable
Cable type
Cable type (abbreviation)
UL AWM style
Signal type/category
Cable structure
Conductor cross section
CAN Bus/DeviceNet
920
21198 (80°C/300 V)
CANopen
®
DeviceNet™
2xAWG24/19+2xAWG22/19
2x 0.25 mm² (Data cable)
2x 0.34 mm² (Power supply)
1x 0.34 mm² (Drain wire)
10/12/2016 Page 2 / 7
https://www.phoenixcontact.com/us/products/1437520
Bus system flush-type socket - SACCBP-FS-5CON-
PG9/0,5-920SCO - 1437520
Technical data
Cable
AWG signal line
AWG power supply
Conductor structure signal line
Conductor structure, voltage supply
Core diameter including insulation
Wire colors
Twisted pairs
Type of pair shielding
Overall twist
Shielding
Optical shield covering
External sheath, color
External cable diameter D
Minimum bending radius, flexible installation
Number of bending cycles
Bending radius
Traversing path
Traversing rate
Acceleration
Cable weight
Outer sheath, material
Material conductor insulation
Conductor material
Insulation resistance
Conductor resistance
Cable capacity
Wave impedance
Wave attenuation
Nominal voltage, cable
Test voltage Core/Core
Test voltage Core/Shield
Flame resistance
24
22
19x 0.13 mm
19x 0.15 mm
1.95 mm ±0.05 mm (Data cable)
1.4 mm ±0.05 mm (Power supply)
Red-black, blue-white
2 cores to the pair
Plastic-coated aluminum foil, aluminum side outside
2 pairs around a drain wire in the center to the core
Tinned copper braided shield
80 %
violet RAL 4001
6.7 mm ±0,3 mm
10 x D
5000000
70 mm
4.5 m
3 m/s
3 m/s²
90 kg/km
PUR
Foamed PE (Data cable)
PE (Power supply)
Tin-plated Cu litz wires
≥ 5 GΩ*km (Data cable)
≥ 5 GΩ*km (Power supply)
≤ 90.9 Ω/km (Data cable)
≤ 57.4 Ω/km (Power supply)
nom. 40 pF/m (Data cable)
120 Ω ±10 % (with 1 MHz)
≥ 0.0229 dB/m (with 1 MHz)
≤ 300 V (Peak value, not for high-power applications)
2000 V (50 Hz, 1 min.)
2000 V (50 Hz, 1 min.)
UL 1581, Sec. 1060 (FT-1)
10/12/2016 Page 3 / 7
https://www.phoenixcontact.com/us/products/1437520
Bus system flush-type socket - SACCBP-FS-5CON-
PG9/0,5-920SCO - 1437520
Technical data
Cable
IEC 60332-1
in accordance with ISO 6722-1 5.22 (UN ECE-R 118.01)
Halogen-free
Other resistance
Ambient temperature (operation)
Ambient temperature (storage/transport)
in accordance with DIN VDE 0472 part 815
According to IEC 60754-1
Low adhesion
-40 °C ... 80 °C (cable, fixed installation)
-20 °C ... 80 °C (cable, flexible installation)
-40 °C ... 80 °C
Drawings
Dimensional drawing
max.4,5
Schematic diagram
3
5
4
Ø15,3
+0,1
2
1
13,5
+0,1
1x45°
Pin assignment M12 socket, 5-pos., A-coded, socket side view
Housing cutout for Pg9 fastening thread, mounting panel with feed-through
hole (alternatively with surface as protection against rotation)
Cable cross section
Circuit diagram
1
2
3
4
5
SH
RD
BK
WH
BU
CAN Bus/DeviceNet [920]
Contact assignment of the M12 socket
10/12/2016 Page 4 / 7
https://www.phoenixcontact.com/us/products/1437520
Bus system flush-type socket - SACCBP-FS-5CON-
PG9/0,5-920SCO - 1437520
Dimensional drawing
18
18
2,8
18
6,25 Nm
17
2
6,5
M12 panel feed-through
Classifications
eCl@ss
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27250313
27250313
27143423
27143423
27143423
27449001
27440103
27440102
ETIM
ETIM 3.0
ETIM 4.0
ETIM 5.0
EC002061
EC000830
EC002061
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
UNSPSC 12.01
UNSPSC 13.2
31251501
31251501
31251501
31251501
39121413
Approvals
Approvals
PG9
10/12/2016 Page 5 / 7