TENTATIVE
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TB9101FNG
TB9101FNG
2ch H-Bridge driver for DC Brushed Motor
TB9101FNG is a 2ch H-bridge driver which is designed
specifically for Automotive. 2ch DMOS transistor are built-in for
directly driving small DC Brushed motor. It is each contain two
H-Bridge driver circuits. Inputs DI1 A/B and DI2 A/B are
combined to select one of forward, reverse, stop, and brake modes.
Since the inputs are TTL-compatible, this IC can be controlled
directly from a CPU or other control system.
In addition, the IC also has a low standby current function, a
self-diagnostic function, and various detection functions.
TB9101FNG is for wide application such as for Automotive
Air-condition system (Dumper control), Door Mirror control.
TB9101FNG
SSOP24-P-300-0.65A
Weight : TBD
Features
Motor driver
Multi Protection
Self-diagnostic output
Low standby current
Compact flat package
: 2ch H-Bridge driver
(Rdson(Pch)=0.6Ω(typ.), Rdson(Nch)=0.6Ω(typ.))
: Two circuits contained
(Short-circuit, overheat, overvoltage, and low voltage detection)
: Short-circuit mode (±1.5 A(typ.))
: 0mA (typ.)
: 24-pin SSOP (0.65-mm pitch)
Operating supply voltage range: V
CC
½
7 V to 18 V (40V max)
The product(s) is/are compatible with RoHS regulations (EU directive 2002 / 95 / EC) as indicated, if any, on
the packaging label ("[[G]]/RoHS COMPATIBLE", "[[G]]/RoHS [[Chemical symbol(s) of controlled substance(s)]]",
"RoHS COMPATIBLE" or "RoHS COMPATIBLE, [[Chemical symbol(s) of controlled substance(s)]]>MCV").
About solderability, following conditions were confirmed
Solderability
(1) Use of Sn-37Pb solder Bath
∙ solder bath temperature ½ 230°C
∙ dipping time ½ 5 seconds
∙ the number of times ½ once
∙ use of R-type flux
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
∙ solder bath temperature ½ 245°C
∙ dipping time ½ 5 seconds
∙ the number of times ½ once
∙ use of R-type flux
1
2011-12-13
TENTATIVE
RESTRICTIONS ON PRODUCT USE
TB9101FNG
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to
the information in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA.
Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without
alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail.
Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for
their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of
Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before
customers use the Product, create designs including the Product, or incorporate the Product into their own
applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information,
including without limitation, this document, the specifications, the data sheets and application notes for Product and
the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions
for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of
their own product design or applications, including but not limited to (a) determining the appropriateness of the use of
this Product in such design or applications; (b) evaluating and determining the applicability of any information
contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA
ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment,
measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly
stated in this document. Product is neither intended nor warranted for use in equipment or systems that require
extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human
life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes,
without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment,
equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to
control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and
equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by
TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from
the use of Product. No license to any intellectual property right is granted by this document, whether express or
implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND
CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1)
ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL,
SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS,
LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND
ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR
INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including
without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological
weapons or missile technology products (mass destruction weapons). Product and related software and technology
may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the
inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no
liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2011-12-13
测试/测量
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
