Technical Data Sheet
WSMP
RIGHT ANGLE JACK
W1K201-270D3
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
All dimensions are in INCHES [mm]
Interface
According to
Rosenberger WSMP™ Interface standards
Documents
Assembly instruction
TBD
Material
CuBe
CuBe
CuBe
PTFE
Ultem® 1000
Plating
Gold, min. 1.27 µm, over nickel
Gold, min. 1.27 µm, over nickel
Gold, min. 1.27 µm, over nickel
Material and plating
Connector parts
Center contact
Outer contact
Body
Dielectrics
Cable Stop
Rosenberger of North America, LLC
P.O. Box 309 Akron, PA USA 17501
www.rosenbergerna.com
RF_35/05.10/6.0
Tel. : +1.717.859.8900
Fax : +1.717.859.7044
Email :
info@rosenbergerna.com
Page
1/2
Technical Data Sheet
WSMP
RIGHT ANGLE JACK
W1K201-270D3
Electrical data
Impedance
Frequency
Return loss (typical)
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Insertion loss
Insulation resistance
Center contact resistance
Outer contact resistance
Test voltage
(at sea level)
RF High Potential
(at sea level)
RF-leakage
- Limitations are possible due to the used cable type
50
DC to 100 GHz
26 dB, DC to 26.5 GHz
15 dB, 26.5 to 65 GHz
0.12 x
f(GHz)
dB
3
3.5 x10 M
2.0 m
6.0 m
250 V rms
150 V rms @ 5 MHz
-80 dB (typical mated pair)
Mechanical data
Mating cycles
- Full Detent mating plug
- Smooth Bore mating plug
Engagement force (typical)
- Full Detent
- Smooth Bore
Disengagement force (typical)
- Full Detent
- Smooth Bore
100
500
11 N [2.5 lbs
f
]
5.3 N [1.2 lbs
f
]
20 N [4.5 lbs
f
]
4.5 N [1.0 lb
f
]
Environmental data
Temperature range
Thermal shock
Corrosion
Vibration
Shock
Moisture resistance
2002/95/EC (RoHS)
-55° to +165°C
MIL-STD-202, Meth. 107, Cond. B
MIL-STD-202, Meth. 101
MIL-STD-202, Meth. 204, Cond. D
MIL-STD-202, Meth. 213, Cond. I
MIL-STD-202, Meth. 106, except Step 7B
compliant
Tooling
Extraction tool
W1W001-000
Suitable cables
UT 47 or RTK 047 or RTK-Flex 047
Packing
Standard
100 pcs in a bag
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Jac Havener
Date
6/22/2011
Approved
Paul Czikora
Date
6/22/2011
Rev.
a00
Engineering change number
13-s000
Name
Paul Czikora
Date
4/4/2013
RF_35/05.10/6.0
Rosenberger of North America, LLC
P.O. Box 309 Akron, PA USA 17501
www.rosenbergerna.com
Tel. : +1.717.859.8900
Fax : +1.717.859.7044
Email :
info@rosenbergerna.com
Page
2/2
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
