AMPMODU Interconnection System
Level V IDC Connectors, .125 x .125 [3.18 x 3.18] Centerline
Product Facts
■
Termination of discrete
wire sizes 26-22 AWG
[0.12-0.3 mm
2
] as well as
jacketed cable and bonded
ribbon cable (conductors
separated)
Connectors stackable end-
to-end and side-to-side on
.125 [3.18] centers
Connectors preloaded with
insulation displacement
receptacle contacts
Contact design employs
dual cantilever beams,
redundant insulation
displacement slots, built-in
post stop and wire support
crimp
Copper alloy contacts are
duplex plated
Snap-on covers with or
without cable tie paddles
Full line of mass
termination tooling offers
lowest installed costs for
most production needs
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
■
■
■
■
■
■
■
Certified by Canadian
Standards
Association,
File No. LR 7189
R
AMPMODU Level V IDC
connectors provide cost
effective discrete wire
connections that are
compatible with today's
telecommunications
packaging techniques.
These connectors are
designed to mate with .025
[0.64] sq. posts on .125 x
.125 [3.18 x 3.18] centers
and are comprised of
double-row housings
preloaded with insulation
displacement receptacle
contacts, snap-on
hermaphroditic covers, and
a full line of mass termination
tooling to meet virtually
every production need. For
modular flexibility, connectors
can be stacked end-to-end
or side-to-side, maintaining
a .125 x .125 [3.18 x 3.18]
centerline spacing.
Covers can be furnished
with and without a cable tie
paddle. The covers are
simply snapped onto a
housing after the connector
has been terminated.
The receptacle contacts
feature the Tyco Electronics
insulation displacement
crimp technique for
achieving top quality, low
cost terminations. These
contacts employ dual
cantilever beams for
redundant interface with a
mating post, an integral
post stop to limit post
mating depth and protect
the crimp termination, and
a wire support (strain relief)
crimp to prevent accidental
wire pull-out. The contacts
are made of high
conductivity copper alloy
and are duplex plated.
Performance
Characteristics
Contact Current Rating
—
3 amperes
Termination Resistance
—
12 milliohms (max.)
Durability
— Ref. Product
Specification 108-25028
(Interconnection System, Insulation
Displacement Connector, IDC Level)
Application Specification
114-25020 (Interconnection System,
IDC Level V, Application of)
.125 [3.18] x .125 [3.18]
Centerline
6
279
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Receptacle Assemblies, Double-Row, .125 x .125 [3.18 x 3.18] Centerline
Housings Preloaded with
Insulation Displacement
Crimp Receptacle Contacts
.800
[20.32]
Material and Finish
Housing
— Black thermoplastic, flame
retardant
Contacts
— Copper alloy, duplex
plated .000050 [0.00127] gold on
contact area, .000100 [0.00254] min.
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Note:
Preloaded contacts accept max.
insulation dia. of .050 [1.27]. The mini-
mum point of contact, as measured from
front edge of housing, is .095 [2.41].
.298
[7.57]
A
.059
[1.50]
B
.243
[6.17]
Technical Documents
—
pages 277, 278
Product Specification
108-25028
Application Specification
114-25020
Receptacle assemblies can be
stacked end-to-end and side-to-
side on .125 x .125 [3.18 x 3.18]
centers.
.125
[3.18]
.125
Typ.
[3.18]
.125 [3.18] x .125 [3.18]
Centerline
No. of
Pos.
8
10
12
16
20
24
30
32
40
1
Dimensions
A
.493
[12.52]
.618
[15.70]
.743
[18.87]
.993
[25.22]
1.243
[31.57]
1.493
[37.92]
1.868
[47.45]
1.993
[50.62]
2.493
[63.32]
B
.375
[9.52]
.500
[12.70]
.625
[15.88]
.875
[22.23]
1.125
[28.58]
1.375
[34.93]
1.750
[44.45]
1.875
[47.63]
2.375
[60.33]
6
Receptacle Assembly (Stamped
1
)
for 26-22 AWG
[0.12-0.3 mm
2
] Wire
102935-4
102935-6
102935-8
1-102935-2
1-102935-6
1-102935-9
1-102935-3
2-102935-8
3-102935-6
White ink stamped, one side—8- thru 12-position with AMP and arrow; 14- and 16-position with AMP, part no., and
arrow; 18- thru 40-position with AMP, part no., date code and arrow.
Notes:
1. Covers for these housings are shown on pages 281 & 282.
2. Termination tooling for these connectors are shown on page 273-275.
3. 14- and 18-position receptacle assemblies, as well as other sizes, can be made available upon request.
Consult Tyco Electronics.
Note:
All part numbers are RoHS compliant.
280
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
All covers illustrated here
and on the following page
can be used on the double-
row Level V IDC connectors
shown on page 280.
Material
Black thermoplastic, flame retardant,
94V-0 rated
A
A
.603
[15.32]
.125
[3.18]
Typ.
.125
[3.18]
Typ.
.603
[15.32]
Cover 103056 Series
without Cable Tie Paddle
Cover 103058 Series
with Cable Tie Paddle
.100
[2.54]
(2 Plc.)
Cable Tie
Paddle
C
.605
[15.37]
.125
Typ.
[3.18]
B
.605
[15.37]
Cable Tie
Paddle
.125
[3.18]
Typ.
D
A
1.105
[28.07]
A
.125 [3.18] x .125 [3.18]
Centerline
Cover 103349 Series
with Wide Cable Tie Paddle
Cover 103350 Series
with Wide Cable Tie Paddle
and Polarization
No. of
Pos.
(Housing
Size)
8
10
12
16
20
24
32
40
64
Dimensions
A
.491
[12.47]
.616
[15.65]
.741
[18.82]
.991
[25.17]
1.241
[31.52]
1.491
[37.87]
1.991
[50.57]
2.491
[63.27]
B
.150
[3.81]
—
—
.300
[7.62]
.300
[7.62]
—
.600
[15.24]
.750
[19.05]
C
.285
[7.24]
—
—
.592
[15.04]
.592
[15.04]
—
1.312
[33.32]
1.820
[46.23]
D
E
Without
Cable Tie
Paddle
Cover Part Nos.
With
With Wide With Wide
Cable Tie
Cable Tie
Cable Tie
Paddle
Paddle
Paddle and
Polarization
103349-4
—
—
103349-1
103349-5
—
103349-2
103349-3
103350-4
—
—
103350-1
103350-5
—
103350-2
103350-3
6
.166
[4.22]
.125
[3.18]
—
—
—
.125
[3.18]
—
103058-3
—
.200
[5.08]
—
103058-4
.416
[10.57]
—
—
—
.541
[13.74]
—
—
—
—
.400
[10.16]
1-103056-0 1-103058-0
.916
[23.27]
—
—
—
1.166
[29.61]
—
—
—
See page 282 for Double Cable Tie Paddle versions.
Notes:
1. Two hermaphroditic covers of any style can be installed on a double-row connector housing.
2. Other sizes can be made available upon request.
Note:
All part numbers are RoHS compliant.
281
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
Hermaphroditic Covers for Level V IDC Receptacle Assemblies,
Double-Row, .125 x .125 [3.18 x 3.18] Centerline
(Continued)
.100
[2.54]
Typ.
1.312
Typ.
[33.32]
.603
[15.32]
.125
Typ.
[3.18]
.600
Typ.
[15.24]
Cable Tie Paddle
3.991
[101.37]
1.103
[28.02]
Cover Part No. 104583-1, 64-Position
with Double Cable Tie Paddle
.125 [3.18] x .125 [3.18]
Centerline
.100
[2.54]
Typ.
.603
[15.32]
1.312
Typ.
[33.32]
.125
Typ.
[3.18]
.600
Typ.
[15.24]
6
.916
[23.27]
Cable Tie Paddle
3.991
[101.37]
Cover Part No. 104584-1, 64-Position
with Double Cable Tie Paddle
and Polarization
1.103
[28.02]
Note:
All part numbers are RoHS compliant.
282
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
AMPMODU Interconnection System
AMPMODU .031 x .062 [0.79 x 1.57] Interconnection System
Product Facts
■
Rugged connector system
featuring .031 x .062
[0.79 x 1.57] posts with
mating receptacles
Current rating 5 amps max
per contact. Varies due to
ambient temperature, wire
size and duty cycles.
Available for board-to-board
and wire-to-board
applications
Posts available on strip
for machine application
directly to pc board or in
housings for board
mounting
Receptacles available for
board mounting or wire
crimping
Contacts available in both
tin and gold plating
Flame retardant
thermoplastic housings
94V-0 rated
Locking Clip contacts
available to mate with
.031 x .062 [0.79 x 1.57]
posts
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
R
■
■
■
■
■
■
■
■
■
Certified by Canadian
Standards
Association,
File No. LR 16455
R
The .031 x .062 [0.79 x 1.57]
interconnection system
has served as an industry
standard for modular
packaging for over three
decades. It is a rugged,
large scale system
designed for board-to-board
and board-to-wire or cable
applications that has offered
millions of reliable
interconnections and
countless mating cycles.
This versatile interconnection
system successfully meets
the requirements for most
modular power supply
packaging.
Board mounted receptacles
and receptacle assemblies
are available in various
geometries, offering
packaging interconnections
that include perpendicular,
parallel and stacking
capabilities. Machine
applied terminations,
through matched
application equipment,
are geared to virtually any
production requirement,
assuring the lowest possible
applied cost.
Crimp snap-in receptacles
for 26-18 AWG [0.12 –
0.9mm
2
] wire provide
excellent discrete wire
terminations. Housings for
these contacts provide for
ease of handling
terminations in high density
applications.
AMPMODU mating posts
are supplied typically as
header assemblies. They are
available in various sizes to
meet the interconnection
and packaging requirements
of your system. However, in
instances where packaging
configurations do not
lend themselves to the
economies of assemblies,
Tyco Electronics can
provide for the discrete
location of individual posts
and receptacles.
Mod I 0.031 x 0.062
Interconnection System
If your interconnections
require Top Entry, Bottom
Entry and/or Side Entry for
perpendicular, parallel and
stacked configurations, the
.031 x .062 [0.79 x 1.57]
interconnection system can
fulfill your needs with the
lowest applied cost through
efficient interconnections
and supporting application
equipment.
7
283
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208a
意法半导体-低功耗射频
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
