SPECIFICATION SHEET • SKYFR-001461
Table 2. Electrical Specifications (Note 1)
Parameter
Frequency range
Impedance
Insertion loss
Insertion loss
Isolation
Isolation
Return loss
Return loss
Group delay
Intermodulation distortion (Note 2)
IMD
2 x 5W CW tones, 1MHz spacing
55
65
IL
IL
ISO
ISO
RL
RL
Over extended temperature range (-40°C to
+125°C)
Over extended temperature range (-40°C to
+125°C)
Over extended temperature range (-40°C to
+125°C)
23
20
23
20
Symbol
f
Test Condition
Min
2620
50
0.15
0.18
24
22
24
22
2.0
0.20
0.25
dB
dB
dB
dB
dB
dB
ns
dBc
Typical
Max
2690
Units
MHz
Note 1:
Performance is guaranteed under the conditions listed in this table and over the operating temperature range.
Note 2:
See Skyworks Application Note,
Intermodulation Distortion Measurements of Ferrites,
document number 201537 for further details.
Note 3:
Part tested on PCB-00077, 0.508mm Rogers RO4350B, trace width 1.07mm wide, 1oz copper.
Table 3. Plating Specification
Section
Pins
Housing
Base Material
Brass
Steel
Plating
Silver
Silver
Table 4. Ordering Information
Manufacturing Part Number
SKYFR-001461
Evaluation Board Part Number
TFX-00118
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 2016
2
SPECIFICATION SHEET • SKYFR-001461
All dimensions in millimeters.
Tolerance: ±0.2mm unless otherwise specified.
Coplanarity specification: 0.1mm maximum.
Figure 2. Package Dimensions and Recommended PCB Layout
Copyright © 2011 Skyworks Solutions, Inc. All Rights Reserved.
Information in the document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service
to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may
change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility
whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder,
including the sale, distribution, reproduction or use of any Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR
A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRIDGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EX-
PRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENCIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environ-
mental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or
sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published
parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or
damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc. in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com and incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 2016
3
单片机
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
