NUMBER
TYPE
GS-12-1278
TITLE
Product Specification
PAGE
REVISION
1 of 15
A2
DATE
TRX10GVP2010C2 (SFP+ SR Module)
AUTHORIZED BY
J. Blank
CLASSIFICATION
06 May 2015
UNRESTRICTED
Product Specification
10 Gbps SFP+ 850 nm Limiting Transceiver
TRX10GVP2010C2
Product Features:
Hot pluggable SFP+ optical transceiver
Programmable output pre-emphasis
Data rate transparent from 9.95 to 11.3 Gbps
Quarter-Watt power consumption class (~ 0.28 W typically)
Excellent EMI performance
Transmission distance up to 400 m
0 °C to +70 °C operating case temperature
850 nm VCSEL laser
Duplex LC connector
Laser Class 1
RoHS 6/6 compliant
Applications:
10G Ethernet 10GBASE-SR/SW
10G Fibre Channel 1200-MX-SN-I
FCI’s SFP+ optical transceiver TRX10GVP2010C2 is compliant with the SFP+ MSA specifications
(SFF-8431 and SFF-8432) and with 10GBASE-SR/SW per IEEE 802.3 as well as 1200-MX-SN-I
per 10G Fibre Channel. It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1
safety compliant per IEC/CDRH. The quarter-Watt power consumption and the excellent EMI
performance allow system design with high port density. Adjustable output pre-emphasis allows to
overcome host board high frequency signal loss and to optimize module performance in interaction
with host board equalizers.
Supported Standards
Application
10G Ethernet LAN/WAN
10G Fibre Channel
Standard
IEEE 802.3 10GBASE-SR/SW
1200-MX-SN-I
Data Rate
10.312 / 9.953 Gbps
10.518 Gbps
Copyright © 2015 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice.
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
PDS: Rev :A
STATUS:Released
Printed: May 13, 2015
NUMBER
TYPE
GS-12-1278
TITLE
Product Specification
PAGE
REVISION
2 of 15
A2
DATE
TRX10GVP2010C2 (SFP+ SR Module)
AUTHORIZED BY
J. Blank
CLASSIFICATION
06 May 2015
UNRESTRICTED
Table of Contents
Table of Contents ......................................................................................................................................... 2
Functional Description ................................................................................................................................. 3
Electrical Characteristics ............................................................................................................................. 4
Absolute Maximum Ratings ......................................................................................................................... 4
Recommended Operating Conditions.......................................................................................................... 4
Low Speed Characteristics .......................................................................................................................... 4
SFI Module Transmitter Input Characteristics.............................................................................................. 5
SFI Module Receiver Output Characteristics ............................................................................................... 5
Optical Characteristics ................................................................................................................................. 6
General Parameters .................................................................................................................................... 6
Optical Transmitter ...................................................................................................................................... 6
Optical Receiver .......................................................................................................................................... 6
Application Information................................................................................................................................ 7
Connector Pinout......................................................................................................................................... 7
Electrical Pin Definition ................................................................................................................................ 7
Application Schematics ............................................................................................................................... 8
Interfacing the Transceiver .......................................................................................................................... 9
Digital Optical Monitoring ............................................................................................................................ 9
Rx Output Pre-emphasis Adjustment ........................................................................................................ 10
Programmability Feature Code .................................................................................................................. 11
Passcode Entry and Modification .............................................................................................................. 11
Module Outline .......................................................................................................................................... 12
Module Safety & Compliance ..................................................................................................................... 13
ESD & Electromagnetic Compatibility....................................................................................................... 13
Eye Safety ................................................................................................................................................... 14
Copyright © 2015 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice.
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
PDS: Rev :A
STATUS:Released
Printed: May 13, 2015
NUMBER
TYPE
GS-12-1278
TITLE
Product Specification
PAGE
REVISION
3 of 15
A2
DATE
TRX10GVP2010C2 (SFP+ SR Module)
AUTHORIZED BY
J. Blank
CLASSIFICATION
06 May 2015
UNRESTRICTED
Functional Description
The transmit path is based on an AC coupled 100 ohm differentially terminated driver coupled to an 850 nm
VCSEL. Laser output may be disabled by pulling the transmitter disable (TX_DISABLE) line high which is its
default state when leaving the input floating due to an internal pull-up resistor. A fault condition is raised
upon detection of an abnormal laser state.
The receive path consists of a PIN-photodiode connected to a transimpedance and limiting amplifier (TIALA)
for optical to electrical conversion. The electrical signal is provided to the 20 pin connector via an AC coupled
100 ohm differential line. A loss of signal (LOS) status line provides information to facilitate easy link
detection.
Complete digital monitoring and control is implemented in compliance to SFF-8472 and made accessible via
the 2-wire-interface, providing real time information about all important module parameters and status
information.
Copyright © 2015 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice.
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
PDS: Rev :A
STATUS:Released
Printed: May 13, 2015
NUMBER
TYPE
GS-12-1278
TITLE
Product Specification
PAGE
REVISION
4 of 15
A2
DATE
TRX10GVP2010C2 (SFP+ SR Module)
AUTHORIZED BY
J. Blank
CLASSIFICATION
06 May 2015
UNRESTRICTED
Electrical Characteristics
Absolute Maximum Ratings
Rating
Storage Ambient Temperature
Powered Case Temperature
Operating Relative Humidity
Supply Voltage Range
Conditions
Symbol
ϑ
stg
ϑ
c
RH
V
CCT/R
Min
-40
0
0
-0.5
Max
+85
+75
85
4.0
Units
°C
°C
%
V
Non condensing
Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under
recommended operating conditions.
Recommended Operating Conditions
Parameter
Operating Case Temperature
Power Supply Voltage
DC Common Mode Voltage
SFI Signals
Conditions
Symbol
ϑ
Case
V
CCT/R
V
CM
Min
0
3.135
-0.5
3.30
Typ
Max
+70
3.465
4.0
Units
°C
V
V
Low Speed Characteristics
Parameter
Supply Current Transmitter
Supply Current Receiver
Power Consumption
V
OL
TX_Fault, RX_LOS
Host Vcc Range 2 V – 3.47 V,
I
OL_max
= 4 mA
V
OH
V
IL
TX_Disable, RS0, RS1
Low Voltage TTL
V
IH
V
IL
Host Vcc Range 3.13 V – 3.47 V,
I
OL_max
= 4 mA
V
IH
V
OL
V
OH
0
Host_
Vcc –
0.5
-0.3
2.0
-0.3
VccT
* 0.7
0.0
Host_
Vcc –
0.5
Conditions
@ V
CCT
@ V
CCR
Symbol
I
VCCTX
I
VCCRX
Min
Typ
Max
60
50
0.38
0.4
Host_
Vcc +
0.3
0.8
VccT +
0.5
VccT
* 0.3
VccT +
0.5
0.4
Host_
Vcc +
0.3
Units
mA
mA
W
V
SCL, SDA
Copyright © 2015 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice.
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
PDS: Rev :A
STATUS:Released
Printed: May 13, 2015
NUMBER
TYPE
GS-12-1278
TITLE
Product Specification
PAGE
REVISION
5 of 15
A2
DATE
TRX10GVP2010C2 (SFP+ SR Module)
AUTHORIZED BY
J. Blank
CLASSIFICATION
06 May 2015
UNRESTRICTED
SFI Module Transmitter Input Characteristics
Parameter
Nominal Data Rate
Reference Differential Input
Impedance
Input AC Common Mode Input
Voltage
Differential Input Voltage Swing
Differential Input S-parameter
Differential to Common Mode
Conversion
3
)
Total Jitter
Data Dependent Jitter
Uncorrelated Jitter
1)
2)
3)
Conditions
Symbol
Z
d
Min
Typ
10.3125
100
Max
Units
Gbps
Ω
0
2 x |V(TD+) – V(TD-)|
0.01 – 4.1 GHz
4.1 – 11.1 GHz
0.01 – 11.1 GHz
V
ID
SDD11
SCD11
TJ
DDJ
UJ
190
25
850
1
2
mV
(RMS)
mV
dB
dB
dB
UI(p-p)
UI(p-p)
RMS
)
)
-10
0.28
0.1
0.023
Reflection coefficient given by equation SDD11(dB) < -12 + 2 x SQRT(f), with f in GHz.
Reflection coefficient given by equation SDD11(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz.
Common mode reference impedance is 25Ω.
SFI Module Receiver Output Characteristics
Parameter
Nominal Data Rate
Reference Differential Output
Impedance
Termination Mismatch
Output AC Common Mode Voltage
Differential Output Amplitude
Output Rise and Fall Time
Differential Output S-parameter
Common Mode Output Return Loss )
99% Jitter
Total Jitter
1)
2)
3)
4)
4
Conditions
Symbol
Z
d
∆Z
d
Min
Typ
10.3125
100
Max
Units
Gbps
Ω
5
7.5
%
mV
(RMS)
mV
ps
R
Load
= 100 ohm,
2 x |V(RD+) – V(RD-)|
20 % to 80 %
0.01 – 4.1 GHz
4.1 – 11.1 GHz
0.01 – 2.5 GHz
2.5 – 11.1 GHz
See SFP+ MSA
See SFP+ MSA
V
OSPP
t
R
, t
F
SDD22
SCC22
J2
TJ
350
28
800
1
2
3
)
)
dB
dB
dB
dB
UI(p-p)
UI(p-p)
)
-3
0.42
0.7
Reflection coefficient given by equation SDD22(dB) < -12 + 2 x SQRT(f), with f in GHz.
Reflection coefficient given by equation SDD22(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz.
Reflection coefficient given by equation SCC22(dB) = -7 + 1.6 x f, with f in GHz
Common mode reference impedance is 25Ω.
Copyright © 2015 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this document at any time without notice.
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
PDS: Rev :A
STATUS:Released
Printed: May 13, 2015
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
