VERSATILE HIGH VOLTAGE POWER SUPPLY MODULES
Series MH60
FEATURES
60W output power
High reliability
24V DC powered
Range of outputs available
Positive or negative polarity
Short circuit & flashover protection
Remotely controllable
V & I control
V & I monitor
LED status indication
Low ripple
EU RoHS Compliant to 2002/95/EC
marked for EU LV Directive 73/23/EEC
DESCRIPTION
The Series MH60 is a range of versatile high voltage power supply
modules suitable for specification in OEM equipment. Powered from
24V DC, they supply up to 60W output and allow full range control and
monitoring of output voltage and current. Custom versions can be
produced for specific requirements.
Voltage Regulation:
Line:
Less than 0.01% for a 10% change in input voltage.
Load:
Less than 0.01% ±1V no load to full load.
Current Regulation:
Line:
Less than 0.01% for a 10% change in input voltage.
Load:
Less than 0.01% ±1µA for a 50% voltage change.
Voltage Control:
0 to 10V for 0 to 50kV accuracy 0.25% ±10V.
Current Control:
0 to 10V for 0 to 1.2mA accuracy 0.25% ±1µA.
Monitors:
Voltage: 0 to 10V ±0.25% ±5mV for 0 to 50kV.
Current: 0 to 10V ±0.25% ±5mV for 0 to 1.2mA.
Note:
Each monitor has a series output resistor of 1kΩ.
Temperature Coefficent:
100ppm/oC over operating temperature range.
Applies to Voltage Control, Voltage Monitor and Current Monitor.
Stability:
±0.1% over an 8 hour period after 30 minutes warm-up.
Operating Temperature:
0 to +45oC.
Storage Temperature:
-20oC to +60oC.
SPECIFICATION
Output Power:
60W max output power.
Output Voltage:
0 to 50kV depending on model.
Output Current:
0 to 2mA depending on model.
Input Voltage:
+24V DC (±10%).
Input Current:
4A max.
Polarity:
Positive or negative to order.
Ripple:
Less than 0.05% +10V peak to peak.
w w w. h i t e k p o w e r. c o m
Series MH60
VERSATILE HIGH VOLTAGE POWER SUPPLY MODULES
Humidity:
85% maximum relative humidity non-condensing.
Altitude:
Sea level to 2000m (6500 ft).
Installation Category:
1 (BS EN61010-1)
Pollution Degree:
2 (BS EN61010-1)
Control:
The power supply is operated via the 9-way D-type connector situated
on the rear panel. Full control and monitoring functions are available
by this method.
Cooling:
Free convection (no fan).
Protection:
The units are fully protected against flashover and continuous short
circuit (no trip).
EMC:
The Series MH60 is intended for installation as a component of a
system. Basic EMC filtering is provided.
Safety:
The Series MH60 meets the requirements of the Low Voltage Directive
(LVD), 2006/95/EC, by complying with BS EN61010 when it is installed as
a component part of compliant equipment. It is CE marked accordingly.
RoHS:
The Series MH60 meets the requirements of EU Directive 2002/95/EC
on the Restriction of use of certain Hazardous Substances in electrical
and electronic equipment (RoHS).
Mechanical Specification:
Dimensions:
See outline drawing.
Weight:
3kg (6.6lb).
Casing:
Aluminium, clear non-chrome passivate finish.
Outputs and Ordering Information:
The standard range of units available is as follows:
Model no
MH60/303*
MH60/403*
MH60/503*
Output Voltage
30kV
40kV
50kV
Output Current
2mA
1.5mA
1.2mA
Interface Connection:
Input DC:
2 x ¼” space terminals.
Safety Earth:
M5 stud.
HV Output:
50kV unit has ‘poke home’ connector.
Control interface via a 9-way female D-type connector:
SIGNAL GROUND 0V
1
HV ON/OFF
2
VOLTAGE PROGRAM
3
VOLTAGE MONITOR
4
CURRENT PROGRAM
5
6
7
8
9
CURRENT MONITOR
INTERLOCK INPUT
INTERLOCK MONITOR
+10V REFERENCE
* Add P for a Positive polarity unit or N for a Negative polarity unit.
eg: part number for a 50kV positive unit: MH60/503P
For voltages not listed above, please contact our sales team.
These component power supplies meet the requirements of EC Directive 73/23/EEC (LVD)
.
w w w. h i t e k p o w e r. c o m
Series MH60
Drawing dimensions are in mm (inches)
Design developments may result in specification changes
VERSATILE HIGH VOLTAGE POWER SUPPLY MODULES
w w w. h i t e k p o w e r. c o m
UK
HiTek Power Ltd
Hawthorn Road, Littlehampton
West Sussex BN17 7LT
UK
Tel:
+44 (0) 1903 712400
Fax:
+44 (0) 1903 712500
e-mail: sales.uk@hitekpower.com
USA
HiTek Power Inc
124 Jewett Street, Unit #2
Georgetown, MA 01833-1868
USA
Tel:
+1 (978) 352-9100
Fax:
+1 (978) 352-9133
e-mail: sales.us@hitekpower.com
GERMANY
HiTek Power GmbH
Joh.-Friedr.-Boettger-Str. 21
D-63322 Roedermark
Germany
Tel:
+49 (0) 6074 69285 0
Fax:
+49 (0) 6074 69285 10
e-mail: sales.de@hitekpower.com
JAPAN
HiTek Power Japan
1-5-13 Kyutaroumachi
Chou-ku, Osaka 541-0056
Japan
Tel:
+81 (6) 6271 8180
Fax:
+81 (6) 6271 8190
e-mail: info@hitekpowerjapan.co.jp
Issue 2: 11/2012
©
HiTek Power Ltd 2012
w w w. h i t e k p o w e r. c o m
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
