Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
Non-linearity - the maximum deviation of measured output at constant temperature, from
"Best Straight Line"
through three points (offset pressure, full scale pressure and 1/2 full
scale pressure).
Change after one year or 1 million pressure cycles.
Thermal effects tested and guaranteed from 0°C to 50°C relative to 25°C. All specifications shown are relative to 25°C.
Span is the algebraic difference between the output at full scale pressure and offset.
Offset adjustment possible to lower values only. Do not trim for nominal value minus 150 mV.
Span adjustment possible to lower pressure range (higher gain). Do not trim for more than 15% of full scale pressure
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein,
neither does it convey any license under its patent rights nor the rights of others.
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
