3 Position Mini PL SPEC Pak
®
is a rugged and environmentally sealed (IP68) connector with a manually operated release
latch. The 3 Position Mini PL leverages PowerMod
®
pin and socket contact technology, delivering capabilities up to 22
amps at 600 volts while handling wires from 24 to 12 AWG (0.5 to 2.5 mm²). The 30µ gold plated pins are available in 3
lengths, enabling sequenced contact mating options. These contacts sit inside a UV and flame resistant shells that are
touch safe on both sides.
Features
Manual Release Latch
• Prevents accidental un-mating
Pin & Socket Contact Technology
• Gold plated for greater conductivity
3 Pin Lengths Available
• Offers sequencing capabilities
Touch Safe per UL 1977 Sec. 10.2
• Touch safe on both pin & socket sides
• F1 weatherability rating per UL 746C
• V0 flammability rating per UL 94
• IP68, exceeds industry standards
Rugged & Environmentally Sealed Shells
Mechanical
Environmental Seal
IEC
UL
Wire
Size
IP 68
50E
Materials
Shell
Latch
Flammability
PC
PC
UL 94 V-0
UL764C / 12 mm, F1
Mating Cycles (no load)
Contact Retention Force
Copper Alloy,
200 µ inch Sn over Ni
Copper Alloy,
30 µ inch Au over Ni
Copper Alloy,
30 µ inch Au over Ni
Ni = nickel
Au = Gold
Mating Force (nominal)
Touch Safe (UL 1977 Sec 10.2)
Latch Strength (nominal)
Sealing Options
Operating Temperature
24 to 12 AWG
0.5 to 2.5 mm²
Sealing Gland
-20 to 105°C
-4 to 221°F”
500
10 lbf
44 N
5 lb
22 N
Pass
24 lb
107 N
Electrical
Current Rating (Amperes)
UL 1977
CSA (30°C Rise)
Voltage Rating
UL 1977 (AC/DC)
Dielectric Withstanding (AC)
Contact Resistance (average)
22
16
Weatherability
Contacts
Socket Body
600
2200
3 Milliohms
Socket Contact
Pin
NOTE: Sn = tin
All Data Subject To Change Without Notice
UL Pending
| ORDERING INFORMATION |
SPEC Pak
®
Mini PL Series is a highly configurable
environmentally sealed connector that can be
purchased as component in bulk for volume production,
or pre-packaged as a kit. Configuring a connector is an
easy three step process.
Step 1
- Select Shell
Step 2
- Select Sealing Gland
Step 3
- Select Contacts
Step 1: Select Shell
SPEC Pak
®
Shell Kits
(sealing glands & contacts sold separately)
Description
Minimum Quantity ...............
Male, Receptacle Shell
Female, Plug
Female, Jam Nut
Female, Cover
Male, Cover
- Part Numbers -
25
...
SK1-019M03
SK6-019M03
SK7-019M03
SK9F-019
SK9M-019
Mates With:
OR
SK1-019M03
Male Receptacle
SK6-019M03
Female Plug
SK7-019M03
Female Panel, Jam Nut
Step 2: Select Sealing Gland
FAQ
Q: Do I need a sealing gland?
A: For IP68 rating, sealing glands are required with SK1-019M03 & SK6-019M03.
A: For splash resistance in the unmated condition, use optional wire sealing grommets with SK7-019M03. (See accessories on page 4).
Q: How do I select the appropriate sealing gland?
A: Identify the number of wires that will be used.
Number of wires: ___________
Identify the outer diameter (OD) of those wire(s). OD of the wires: ___________
Material
Shell
Sealing Grommet
Flammability
Color
PC
EPDM
UL94 V0
Black
Number
of Wires
Bundled Cable
Cable Range
Wire Outer
Part
Diameter (OD)
- Numbers -
mm (in)
25
Connector
Kit
Designation
.............................
Number
of Wires
Discrete Wires
Cable Range
Wire Outer
Diameter (OD)
mm (in)
Part
- Numbers -
25
Connector
Kit
Designation
.............................
Minimum Quantity ..............
1
Minimum Quantity ..............
Torque Requirements
Hand tighten until snug, using
a wrench tighten an additional
1/4 to 1/2 turn.
Wrench Size
22
Mechanical
Operating Temperature
-20° to 105°C
-4° to 221°F
PS2T20-2X
2
0.75 to 1.5
PM
21
3.0 to 4.5
PS
01
PS1T20-5X
(0.03 to 0.06)
(0.12 to 0.18)
.......................................................................................................... ..........................................................................................................
2
1.5 to 2.6
PM
22
PS2T20-3X
PS1T20-7X
1
4.5 to 6.5
PS
02
(0.06 to 0.10)
(0.18 to 0.26)
.......................................................................................................... ..........................................................................................................
0.75 to 1.5
PM
31
PS3T20-2X
3
PS1T20-9X
1
6.5 to 8.5
PS
03
(0.03 to 0.06)
(0.26 to 0.33)
.......................................................................................................... ..........................................................................................................
PS3T20-3X
3
1.6 to 2.6
PM
32
PS1T20-10X
8.5 to 10.0
PS
04
1
(0.06 to 0.10)
(0.33 to 0.39)
.......................................................................................................... ..........................................................................................................
PS3T20-5X
3
4.0 to 4.8
PM
35
1
PS
05
PS1T20-12X
10.0 to 11.5
(0.16 to 0.19)
(0.39 to 0.45)
www.andersonpower.com
All Data Subject To Change Without Notice
Step 3: Select Contacts
FAQ
Q: What should I consider when selecting the contacts?
A: Determine the number of amps (continuous and peak). See temperature charts.
Amps (continuous) _______ at ______ volts & Peak Amps ________ for ________ seconds
Q: Which contacts are used in each shell?
A: Pins are used in SK1-019M03 (male receptacle).
Sockets are used in SK6-019M03 (female plug) & SK7-019M03 (female panel mount, jam nut)
Pin Contacts (PowerMod
®
Series)
- (
For pre-mate and post-mate contacts for sequencing, contact the factory)
Type
AWG
mm²
---------------- Part Numbers ----------------
500
PM16P2024S30
PM16P1620S30
PM16P1416S30
PM16P12S30
50
PM16P2024S30-50
PM16P1620S30-50
PM16P1416S30-50
PM16P12S30-50
Connector
Kit
Designation
Hand
Tool
Pneumatic Tool
Tool
Die Locator
Insertion
Tool
Extraction
Tool
Minimum Quantity .............................
Standard Length 7.7
Pin
24 to 20
0.25 to 0.50
Pin
20 to 16
0.50 to 1.30
Pin
16 to 14
1.30 to 2.10
Pin
12
2.5
P46
P45
P44
P47
PM1000G1 TM0001 N/A
TL0001
PM1002G1 PM1003G1
Socket Contacts (PowerMod
®
Series)
Type
AWG
mm²
---------------- Part Numbers ----------------
500
PM16S2024S32
PM16S1620S32
PM16S1416S32
PM16S12S32
50
PM16S2024S32-50
PM16S1620S32-50
PM16S1416S32-50
PM16S12S32-50
S46
S45
S44
S47
Minimum Quantity ..............................
Socket
24 to 20
0.25 to 0.50
Socket
20 to 16
0.50 to 1.30
Socket
16 to 14
1.30 to 2.10
Socket
12
2.5
Hand
Tool
Pneumatic Tool
Tool
Die Locator
TL0002
Insertion
Tool
Extraction
Tool
PM1000G1 TM0001 N/A
PM1002G1 PM1003G1
NOTE: APP tooling is required for UL & CSA compliance. Use of
unapproved tools will void the connectors warranty.
| TEMPERATURE CHARTS |
3 Pole Mini PL SPEC Pak
®
Temperature Rise VS. Current
All Contacts Energized
3 Pole Mini PL SPEC Pak®
Derating VS. Ambient Temperature
All Contacts Energized
60
50
Temperature (°C)
40
30
20
10
0
125
Ambient Temperature (°C)
100
75
50
01
3
5
7
9
11 13 15 17 19 21 23 25
14 AWG
20 AWG
16 AWG
25
0
5
12 AWG
18 AWG
10
15
20
16 AWG
25
Amperes Applied
12 AWG
18 AWG
Amperes Applied
14 AWG
20 AWG
All Data Subject To Change Without Notice
www.andersonpower.com
| CONNECTOR KIT - PART NUMBER CONFIGURATOR |
Step 1
Select Shell
Series
Color
Shell Style
1
Step 2
Select Sealing Gland
Insert
Arrangement
Wire
Protection
1
Step 3
Select contact
Housing &
Contacts Arrangement
2
Shell Size
S
K
1
-
019
M03
PS
01
-
P46
P46 = 20 - 24 AWG Pin
P45 = 16 - 20 AWG Pin
P44 = 14 -16 AWG Pin
P47 = 12 AWG Pin
1 = Male, Receptacle (Pins)
6 = Female Plug (Sockets)
7 = Female Panel Mount Jam
Nut (Sockets)
019
M03
00 = No Wire Protection
PS = Plastic Single Hole
PM = Plastic Multi-Hole
00 = No Wire Protection
01 thru 99 = See page 3 for selection
1
S46 = 20 - 24 AWG Socket
S45 = 16 - 20 AWG Socket
S44 = 14 - 16 AWG Socket
S47 = 12 AWG Socket
See page 2 for more informaton
|
2
See page 3 for more information
| ACCESSORIES (optional) |
Wire Seal Accessories for use with SK7-021M03
Description
Minimum Quantity
Wire Seal Retainer
Grommet, wire range 1.2 - 1.9mm (0.047”- 0.075”) OD, Orange
Grommet, wire range 1.9 - 2.4mm (0.75”- 0.090”) OD, Yellow
Grommet, wire range 2.5 - 3.2mm (0.100”- 0.130”) OD, Tan
Sealing Plug
-------- Part Numbers --------
1
2-8702P1
114916P1
114916P2
114916P3
114916P4
50
-
114916P1-50
114916P2-50
114916P3-50
114916P4-50
Covers
Description
Minimum Quantity ...........
Female Cover
Male Cover
- Part Numbers -
25
SK9F-019
SK9M-019
| DIMENSIONS |
Male Receptacle
SK1-019M03
[ 0.71 ]
Ø 18.2
[ 1.54 ]
39.2
[ 0.71 ]
Ø 18.2
[ 1.68 ]
42.7
Female Plug
SK6-019M03
Female Panel Mount
SK7-019M03
[ 0.89 ]
Ø 22.6
PANEL
[ 0.94 ]
23.8
[ 0.43 ]
10.9
SK1-019M03 & SK6-019M03 (mated)
[ 3.6 ]
91
Male Cover
SK9M-019
Female Cover
SK9F-019
[ 0.81 ]
20.5
SK1-019M03 & SK7-019M03 (mated)
PANEL
[ 0.70 ]
Ø 17.9
[ 0.91 ]
23.1
[ 0.71 ]
Ø 18
[ 2.5 ]
64
All Data Subject To Change Without Notice
2018-0032
DS-MINI3PL
REV 04
© 2018 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, PowerMod®, SPEC Pak® and the APP Logo are registered trademarks of Anderson Power Products, Inc.
HEADQUARTERS:
Anderson Power Products
®
, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-0128 •
EUROPE:
Anderson Power Products
®
Ltd., Unit 3, Europa
Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 •
ASIA / PACIFIC:
IDEAL Anderson Asia Pacific Ltd., Unit 922-928
Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 •
CHINA:
IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park,
Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 •
TAIWAN:
IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn
District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 •
www.andersonpower.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anderson Power Products
:
2-8702P1 PS1T20-10X SK7-019M03
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
