Termination Boards Selection Guide
100-pin or 50-pin SCSI-type Connectors
3E-2
3E-2
3E-3
3E-3
3E-3
DIN-96DI
(Includes ACL-102100)
DIN-96DO
(Includes ACL-102100)
DIN-100S
(Includes ACL-102100)
DIN-50S
(Includes ACL-10250)
DIN-502S
50-pin Ribbon Connectors
3E-6
3E-4
3E-5
3E-6
DIN-24G or TB-24G
( for Grayhill IO modules)
TB-24R
(Includes ACL-10150-1.5)
TB-24P
(Includes ACL-10150-1.5)
TB-16P8R
(Includes ACL-10150-1.5)
3E-3
3E-4
3E-5
3E-6
DIN-50P
3E-8
3E-8
DIN-24R
3E-7
DIN-24P
3E-7
TB-24
(Includes ACL-10150-1.5)
20-pin Header Connectors
3E-3
ACLD-9182A
(Includes ACL-10120-1)
ACLD-9185
(Includes ACL-10120-1)
ACLD-9188
(Includes 2 ACL-10120-1)
ACLD-9178
(Includes 2 ACL-10120-1)
DIN-20P
3E-3
37-pin D-type Connectors
3E-7
3E-7
3E-9
3E-7
ACLD-9137
(male)
ACLD-9137F
(female)
ACLD-9138
(Includes ACL-10237-1)
ACLD-8125
(Includes ACL-10137-1)
ACLD-9188
(Includes 2 ACL-10120-1)
DIN-37D
3D-1
DIN-96DI
Features
96 Opto-Isolated digital input channels
For use with PCI-7396
AC or DC polarity-free DI
Screw terminals for easy field wiring
Termination Board with
96-Channel Opto-Isolated Digital Inputs
Specifications
Numbers of channel: 96
Opto-isolator: PC3H4
Input impedence: 4.7K Ohms
Input voltage range: 0~24VDC
Input voltage threshold:
• 20V
DC
for external 24V input
• 8.8V
DC
for external 12V input
• 1.8V
DC
for external 5V input
Isolation voltage: 2,500 Vdc
channel-to-ground
Connector: 100-Pin SCSI-type
Dimension:112.7 mm x 225 mm
Operating temp.: 0˚ ~ 60˚C
Storage temp.: -20˚ ~ 80˚C
Humidity: 5~95%, non-condensing
Power consumption:
• 5V: 48mA(max.) from SCSI cable
• External digital input current:
• 24V: 490mA(max.)
• 12V: 250mA(max.)
• 5V: 102mA(max.)
Ordering Information
DIN-96DI
96 Channel Isolated Digital Input
Terminal Board
(includes 1m ACL-105100-1)
Termination Boards
3D-2
DIN-96DO
Features
96 Opto-Isolated digital output channels
For use with PCI-7396
On-board relay driver circuitry
Screw terminals for easy field wiring
Termination Board with
96-Channel Opto-Isolated Digital Outputs
Specifications
Numbers of channel: 96
Opto-isolator: PC3H7
Output type: Darlingtoin transistors, open
collector up to 35Vdc
Sink current:
• 350mA max.@ 100% duty, one of
transistors device ON
• 370mA @ duty 10% for all transistors
devices ON
• 140mA @ duty 50% for all transistors
devices ON
• 60mA @ duty 100% for all transistors
devices ON
Isolation voltage: 2500 Vrms
Dimensions: 112.7 mm x 225.0 mm
Operating temp.: 0˚C ~ 60˚C
Storage temp.: -20˚~ 80˚C
Power consumption:
5V: 102mA(max.) from cable
Ordering Information
DIN-96DO
96 Channel Isolated Digital Input
Terminal Board(includes 1m ACL-105100-1)
DIN Rail Screw Terminal Boards
Features
General
Universal screw terminal boards for easily wiring
DIN socket for easily mounting on DIN-rail
DIN-100S
DIN-100S
General purpose termination board for 100-pin
SCSI-II cable
On-board connector type is female 100-pin
Shipped with 1 meter ACL-102100 cable
Dimensions: 157 x 112 x 51 mm3 (WxLxH)
Termination Boards
DIN-50S
DIN-50S
General purpose termination board for 50-pin
SCSI -II cable
On-board connector type is female 50-pin
Plastic cover for protection of wiring
Shipped with 1 meter ACL-102100 cable
Dimension: 124 x 77 x 50 mm3 (WxLxH)
DIN-502S
DIN-502S
Split 100 signals of 100-pin SCSI-II connector to two
DIN-50S sockets
Shipped with 1 meter ACL-10252 cable
DIN-50P
General purpose termination board for 50-pin ribbon
flex cable
Shipped with 1.5 meters ACL-10150-1.5 cable
Dimension: 145 x 77 x 52 mm3 (WxLxH)
DIN-50P
DIN-37D
General purpose termination board for D-type 37-pin cable
On-board connector type is female 37-pin
Shipped with 1 meter ACL-10137-1 cable
Dimension: 112 x 77 x 52 mm3 (WxLxH)
DIN-37D
DIN-20P
General purpose termination board for 20-pin ribbon
flex cable
Shipped with 1 meters ACL-10120-1 cable
Dimension: 67 x 77 x 51 mm3 (WxLxH)
DIN-20P
Ordering Information
DIN-100S
Termination board with 100-pin SCSI-II
con-nector with DIN socket
DIN-502S
Two pieces of termination board DIN-50S with
cable
DIN-37D
Termination board with 37-pin D-type connector
with DIN socket
DIN-50S
Termination board with 50-pin SCSI-II
con-nector with DIN socket
DIN-50P
Termination board with 50-pin ribbon connector
with DIN socket
DIN-20P
Termination board with 20-pin ribbon connector
with DIN socket
3D-3
DIN-24R/TB-24R
Features
24 single-pole, double-throw (SPDT form C) relays
50-pin Opto-22TM compatible connector
220VDC/250VAC maximum switching voltage
2A DC, AC maximum switching current
On-board relay driver circuitry
LEDs indicate relay status
Screw terminals for easy field wiring
DIN-24R with DIN socket is available for easily mounting
50-pin SCSI-type connector is available for interface
with ND-6058
Termination Board
With 24 Relay Outputs
DIN-24R
Termination Boards
3D-4
TB-24R
Introduction
The DIN-24R and TB-24R relay output boards
are designed for industrial control applications.
It contains 24 electro-mechanical SPDT relays
that can be driven by the 24-bit digital output
ports of the PCI-7248, PCI-7296,ACL-7122,
ACL-7124 and PET-48DIO, ND-6058.
Each relay's switching capacity is 60W/120V.
The normally open, normally closed, and
common contacts for each relay are made
available for maximum flexibility.
Power consumption:
• TB-24R: +5V @ 40mA for each relay is ON
• DIN-24R:
• +5V @ 200mA max.
• +12V @ 33mA for each relay
• 530 mA for all relays on.
Operating temperature: 0˚~ 60˚C
Storage temperature: -20˚~ 80˚C
Operating humidity: 5 ~ 95%, non-
condensing
Dimensions:
• TB-24R: 220 mm x 132 mm
• DIN-24R: 205 mm x 114 mm
Coil (polarized):
• Min. set and reset power: 45mW
• Normal set and reset power: Approx.
90mW
Max. operating speed: 20cpm at rated load
Operating time (at nominal voltage): 3 ms
typical. 10ms max..
Release time (at nominal voltage): 2 ms
typical. 5ms max..
Set time (latching): Approx. 3msec.
Initial breakdown voltage:
• Between open contacts: 500 Vrms
• Between contact and coil: 1,000 Vrms
Initial insulation resistance:
Min. 1,000M
Ω
Specifications
24 Matsushita DS-Relays
Indication display: 24 LEDs
Indication mode:
• logic "1": LED on, relay set
• logic "0": LED off, relay reset
Relay form: Single Pole, Double Throw
(SPDT)
Input terms: Normally open or normally
closed
Relay coil:
Relay model
Nominal voltage
Min. set and
reset voltage
Max. allowable
voltage
Coil resistance
12V Version
DS1E-S-DC1
2V
12VDC
9.6VDC
19.2VDC
1600
Ω
24V Version
DS1E-S-DC2
4V
24VDC
19.2VDC
38.4VDC
6400
Ω
Matsushita DS-Relay
High sensitivity, high switching power
UL/CSA recognized
Contact material: Gold-clad silver
Rating (resistive):
• Max. switching power: 60W, 125VA
• Max. switching voltage: 220VDC, 250VAC
• Max. switching current: 2A DC, AC
• Max. carrying current: 3A DC, AC
UL/CSA rating:
• 6A 125V AC
• 6A 10V DC
• 2A 30V DC
Expected life (min. operations):
• Mechanical: 10
8
• Electrical 2A 30V DC resistive: 5 x 10
5
• Electrical 1A 30V DC resistive: 2 x 10
6
Ordering Information
TB-24R/12
Termination Board with 24 Relay Outputs and
12 Volt Coil
(includes one 1.5meters, 50-pin flat cable)
TB-24R/24
Termination Board with 24 Relay Outputs and
24 Volt Coil
(includes one 1.5meters, 50-pin flat cable)
DIN-24R/24, DIN-24R/12
Termination Board of 24 Relay Outputs and 24
or 12 Volt Coil with DIN Socket
DIN-24P/TB-24P
Features
24 opto-isolated digital input channels
50-pin Opto-22TM compatible connector
50-pin SCSI-type connector available on DIN-24R
to interface with ND-6058
AC or DC polarity-free input, isolated or dry-contact
(without isolation) by jumper selection
Thresholds from 3VDC to 24VDC, adjustable
by changing current-limiting resistors
2500Vrms optical isolation
LEDs indicate input channel status
Jumper selectable for voltage input mode or dry
contact input mode
Screw terminal for easy field wiring
Termination Board with
24 Opto-isolated Digital Inputs
DIN-24P
Termination Boards
TB-24P
Introduction
The DIN-24P and TB-24P digital input
termination boards feature high-voltage opto-
isolation on all input channels. They provides
24 channels that are accessed through a single
50-pin connector, standard on the NuDAQ
digital I/O boards, such as ACL-7122, ACL-
7124, PET-48DIO, and PCI-7248, PCI-7296
and ND-6058.
Each opto-isolated digital input accepts from
3VDC to 24VDC or 6.3mA to 50mA by
changing a current limiting resistor for logic
high. In addition, opto-isolated inputs provide
isolation between separate channels and
between each input channel of your PC system.
Isolation prevents floating potential and ground
loop problems from damaging the PC.
Response time:
• 20 ms without AC filter
• 2.2 ms with AC filter
Dry contact input:
• Internal pull-up voltage supply : +5VDC
• Logic "1": Input Closed
• Logic "0": Input Open
Indication display: 24 LEDs
• Logic "1": LED on
• Logic "0": LED off
Power requirement:
+5V@40mA (max.)
Operating temperature: 0˚~ 60˚C
Storage temperature: -20˚~ 80˚C
Operating humidity:
5 ~ 95%, non-condensing
Dimension:
• TB-24P: 220 mm x 132 mm
• DIN-24P: 205 mm x 114 mm
Pin Assignments for 50-pin
connector of TB-24P
Specifications
General Information
Numbers of channel: 24
Opto-isolator: 4N35
Input impedance: 1.2K Ohms
or 4.7K Ohms for 24V input version
Isolation voltage: 2500VDC or Peak AC
Input mode: Isolation or dry contact
(non-isolation)
Input electrical characteristics:
• Logic "Low": 0.8V max.
• Logic "High": 3VDC to +24VDC
• Logic input high current:
6.3mA to 50mA
Ordering Information
TB-24P
24-CH Isolation/Dry contact termination board
(includes one 1.5 meter 50-pin flat cable)
DIN-24P
24-CH Isolation/Dry contact termination board
with DIN socket
(include 1 m cable ACL-10250-1)
DIN-24/P24, TB-24P/24
24V input version of DIN-24P & TB-24P
3D-5
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
