IA6008-CA11A
Contact image sensor heads
Color image sensor heads for multi-function
IA6008-CA11A
The new compact full color contact image sensor heads are world’s smallest in its class and designed to minimize the
size and weight of the scanner. The sensor chip used for the CIS is produced with the proprietary technologies of ROHM
LSI circuit design and accumulated manufacturing technology of monochrome devices. This product has an excellent
color reproduction capability with the high level of noise immunity with the ultra small package. It operates on 3.3 volts
power supply.
Applications
Image sensor heads device for multiple function facsimiles such as color scanner and multiple function printer.
Features
1) Signal amplifier is built in to the image sensor IC in order to increase immunity to external noise.
2) Additionally, newly developed analog memory circuit and realizes high speed scanning.
3) The LED light source is mounted on the same substrate as the sensor chip which makes it possible to package the
device with lighter weight and an extremely small size.
4) With the proprietary prism, the output signal is maintained uniformly.
5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability.
External dimensions
(Unit : mm)
Paper feeding direction
236±0.2
(1.8)
210(Effective Reading Width)
5±0.20
C
L
Effective 1st bit
12.8±0.5
1mm pitch 12pin
10.6±0.3
A
ROHM
Max. 1.5
(15.5)
(25)
2-R1.5
Effective Depth 2
5.3±0.2
No.12
14.9±0.2
No.1
Note) Deflection at the top of A faces : 0 to 0.25
Pin No.
No.1
No.2
No.3
No.4
No.5
No.6
Signal
Ao
GND
GND
V
DD
V
REF
SP
Pin No.
No.7
No.8
No.9
No.10
No.11
No.12
Signal
CLK
V-LED
B-GND
G-GND
R-GND
N.C.
13.4
+
0.5
−
181.15
28.85
+
0.05
−
0.25
19.05±0.2
1/4
IA6008-CA11A
Contact image sensor heads
Timing chart
(a) CLK Timing Chart
1/fCLK
twH
twL
50%
50%
CLK
50%
50%
SP
tSETUP tHOLD
ts
Ao
1pixel
2pixel
(b) Data Output Timing Chart
After turning on the SP pulse, the analog output starts from the setting up point of 64 clock pulse.
0
1
51 52 53
63 64 65
CLK
SP
Ao
Vref output period(51pixels)
∗1
Vdummy
52 to 63pixels
Analog output period
64 to 5211pixels
1 to 51pixels
Note)The CLK section area which is over the effective pixel numbers
(Output blank part) cannot be used as the analog Output
standard level.
∗1
VREF output period is defined by the peripheral circuit in the next page.
3/4
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
